cruise control light flashing subaru crosstrek

Why is Subaru Cruise Control Light Flashing on My Car Dashboard?

Driving can be fun, but long-distance driving can be fatiguing as you keep pressing the gas pedal to keep the car going at your desired speed. Thankfully, cars now feature cruise control — a system that lets drivers set a desired speed and relaxes their feet when traveling a long journey.

You can activate the system by pressing the cruise control button and the vehicle will keep you at the current speed. So you don’t have to depress the gas pedal to keep the car running. Cars with advanced cruise control systems use sensors at the front bumper to detect vehicles ahead of them and keep the car at a distance to prevent collision.

Like other system components, the cruise control does have issues. And these issues are common with Subaru cars. Most Subaru owners complain of Subaru cruise control light flashing on the dashboard as they drive.

Why does my Subaru cruise control light keep flashing?

The most common reason why the cruise control light is flashing on your Subaru is due to an electrical or mechanical problem. Remember, when the light is flashing, the cruise control system is disabled, so don’t try to turn it on because it won’t work.

In some other cases, the cruise control light may be flashing due to a defective or loose gas cap, a blown fuse for the cruise control, a failing brake pedal switch, or a defective vehicle speed sensor. Let’s have an in-depth look to see how these issues could cause cruise control light flashing on Subaru Outback and other Subaru models.

Blown fuses

The cruise control system consists of several electrical systems protected by a fuse. The fuse can blow up if there’s an electrical power issue, preventing the key components from failing. If that happens, it will disable the cruise control system. In some cases, the car computer will start flashing the cruise control light on the dashboard to notify you that there’s an underlying issue that needs urgent attention.

If you suspect the fuse is blown, replace it and see if that fixes the cruise control system and clear the blinking light on the dashboard.  If that resolves the problem but the fuse blows in no time and the light starts blinking again, you have other electrical issues. Contact your mechanic for a thorough diagnosis.

Defective speed sensor

The vehicle speed sensor is one of the essential components of the cruise control system. When you activate the cruise control, the onboard computer collects information from the speed sensor to know when to increase and decrease the engine speed.

The vehicle speed sensor is mounted at the tail end of your transmission, and if it malfunctions, the cruise control light will start blinking on the dashboard. The speed sensor is needed to ensure that the speedometer and the odometer work correctly, and without it, the cruise control system will be affected.

If you notice the cruise control light flashing and check engine light is on, check the vehicle speed sensor. A bad speed sensor triggers the check engine light and disables the cruise control system. This sensor cannot be repaired. So, if it is the root cause, the only solution is to replace it with a new one.

Loose gas cap

Believe it or not, the gas cap plays a crucial role in your vehicle’s overall functionality. The gas cap can affect the performance of the cruise control system. For instance, in Subarus, a loose gas cap can cause the cruise control light to blink as you drive. It can also trigger the check engine light to pop on the dashboard. So, a loose gas cap can cause the Subaru Forester check engine light with flashing cruise control to pop on the dashboard.

Faulty mechanical component

If you own an older Subaru car, the cruise control light could be flashing due to a faulty mechanical component. In older models, the cruise control system has a cable, connecting the throttle to an air actuator, which regulates the cable to keep the vehicle at the set speed settings.

If any of the mechanical components go bad, it can disable the system and trigger the blinking light on the dashboard.

Malfunctioning brake pedal switch

Under perfect conditions, the brake lights shine as you depress the brake pedal. There’s a component attached to the brake pedal — the brake pedal switch, which tells the brake lights to light up as you depress the pedal.

If the switch goes bad, the brake lights won’t know when you step on the brake pedal. But aside from this, a bad brake pedal switch can also affect the cruise control system.

When you activate the cruise control system, the system will deactivate and switch to manual mode whenever you step on the brake pedal. If the switch malfunctions, it may send wrong signals to the cruise control system, telling it the brake pedal is always depressed, preventing the cruise control system from turning on.

System malfunction

If your Subaru check engine light is flashing along with the cruise control light and the brake pedal switch, fuses, and vehicle speed sensors are good, you have a problem somewhere in the cruise control system.

To determine the root cause of the malfunction, you need a mechanic to diagnose the vehicle. The mechanic will inspect all cruise control components and may plug in a scan tool to pull out all the error codes in the vehicle.

It’s okay for the cruise control light to be on when you activate it, but if the light comes on when you are not using the cruise control, or the light starts blinking when you activate it, there’s a problem that needs to be addressed. In most cases, a flashing cruise control light on Subaru is accompanied by the engine warning light.

What to do if your Subaru cruise control light flashing?

Whenever the Subrau cruise control light starts flashing on the dashboard, the cruise control has malfunctioned or disabled. Hence, do not turn on the cruise control system. If the light starts flashing after getting gas, locate a safe spot and pull over. Check the gas cap and re-tighten it. It could be you did not secure the gas cap properly.

If that do not solve the problem, drive straight to your mechanic and have them diagnose and fix the problem.

Does the cruise control stop working when check engine light is on?

If the onboard computer detects a problem with your transmission or the engine, it will display the check engine light and disable certain vehicle functions, like the cruise control system, to prevent further damage until you address the issue.

Let’s be clear here; this does not mean that the PCM must disable the cruise control whenever it detects an issue with the engine or transmission. It will only disable the system if the issue is causing unstable engine performance.

Subaru Outback check engine light flashing, cruise control, and traction control light blinking can all come up due to engine performance issues. Contact your mechanic to proffer solutions to the problem. 

Final Words

To be precise, the flashing Subaru cruise control light shows there is a mechanical or electrical problem in your car. The cruise control light should be green and steady when you turn on the system. But if the light is flashing, turn off the cruise control until you address the problem.

If you are a DIYer, you can fix the issue yourself. But if you are not, contact your mechanic or dealership. The solution can be easy, quick, and quite affordable.

Osuagwu Solomon

Osuagwu Solomon is a certified mechanic with over a decade of experience in the mechanic garage, and he has over five years of experience in the writing industry. He started writing automotive articles to share his garage experience with car enthusiasts and armature mechanics. If he is not in the garage fixing challenging mechanical problems, he is writing automotive repair guides, buyer’s guides, and car and tools comparisons.

Recent Posts

Can You Drive Without A Radiator Cap?

A vehicle’s radiator cap is designed to seal the radiator filler neck securely. This prevents contaminants from accessing the cooling system; it helps the system to build pressure, which raises the...

Why Does the Check Engine Light Turn On in Cold Weather?

While gearing up or preparing to stay warm during the cold months, also be prepared to do certain things to keep vehicle performance intact. During winter, various vehicle fluids and component...

Subaru cruise control light is flashing. Possible causes

Have you ever noticed your Subaru’s cruise control light flashing? It can be quite disconcerting. Don’t worry, it’s probably nothing serious.

In this article, you’ll learn what could be causing the flashing light and how to fix it. We’ll also discuss some other issues related to cruise control, so you can be better prepared if something similar happens in the future.

Key Takeaways

• The flashing cruise control light in a Subaru could be caused by various issues such as a faulty brake switch, malfunctioning speed sensor, or blown fuse.
• Other potential causes include a failing brake pedal switch, traction control system issues, malfunctioning mechanical components, and failed control module, sensor, or switch issues.
• Throttle actuation problems and dirty or malfunctioning cameras (in the case of adaptive cruise control) can also lead to a flashing cruise control light.
• Before visiting a service center, there are a few solutions to try such as replacing the brake switch, replacing the gas cap, disconnecting the positive battery cable and stepping on the brake pedal, and using an OBDII reader for diagnostic information. However, if the issue persists, it is recommended to visit an authorized Subaru service center for professional diagnosis and repair.

A brief explanation of the issue

If you’re driving a Subaru with cruise control, you may have noticed that the light on the dashboard is flashing . The flashing cruise control light can be caused by a number of issues, including:

• A faulty brake switch
• An electrical fault in the vehicle
• A malfunctioning cruise control system
• A loose or faulty connection in the wiring harness.

Troubleshooting the issue requires an experienced mechanic to diagnose and repair.

Causes of Flashing Cruise Control Light

If your Subaru’s cruise control light is flashing, it may be due to a malfunctioning speed sensor. This sensor is responsible for detecting the speed of the vehicle and relaying that information to the cruise control system. If the sensor is not working properly, it can cause the cruise control light to flash.

Another potential cause of a flashing cruise control light is a blown fuse. The fuse that controls the cruise control system may have blown, preventing it from functioning properly. Checking and replacing the blown fuse can resolve this issue.

A failing brake pedal switch can also be a culprit behind a flashing cruise control light. The brake pedal switch is responsible for detecting when the brake pedal is depressed, which is necessary for the cruise control system to disengage.

If the switch is failing, it may not properly detect when the brake pedal is pressed, leading to a flashing cruise control light.

Lastly, an issue with the traction control system can cause the cruise control light to flash. The traction control system is closely linked to the cruise control system, and if there is a problem with the traction control system, it can trigger the cruise control light to flash.

It is important to note that these are just potential causes and that a proper diagnosis should be done by a qualified technician to accurately identify the issue and determine the appropriate solution.

Malfunctioning speed sensor

You’re likely noticing your Subaru’s cruise control light flashing because the speed sensor is malfunctioning. This could cause a variety of issues such as:

• Reduced fuel economy
• Poor acceleration
• Unstable speed control
• Erratic RPMs.

It’s best to have the speed sensor inspected and replaced if necessary to ensure your car runs smoothly and efficiently.

Another possible cause of the Subaru cruise control light flashing is a blown fuse. A blown fuse is a sign that the circuit is overloaded and can’t handle the current running through it. In this case, the cruise control system may be shorting out and the fuse must be replaced in order to fix the issue.

Failing brake pedal switch

If the brake pedal switch has failed, it can also be the cause of the Subaru’s cruise control light flashing. The brake pedal switch is a safety feature that helps the cruise control system recognize when the brakes are being applied.

A malfunctioning switch can cause the cruise control system to not work properly, resulting in the light flashing.

Regular inspections of the switch can help identify any problems before they become dangerous. Replacing the switch when necessary can help ensure the cruise control system is working correctly and the flashing light isn’t a cause for alarm.

Traction control system issues

Besides a failing brake pedal switch, another potential cause of the Subaru’s cruise control light flashing is a malfunctioning traction control system. Here are four common culprits:

• Faulty wheel speed sensors
• Worn control unit
• Low tire pressure
• Damaged brake pedal switch.

A malfunctioning traction control system can cause the cruise control light to flash, so it’s important to have it checked by a professional to ensure safe driving .

Malfunctioning mechanical components

Apart from a faulty brake pedal switch, malfunctioning mechanical components can also be responsible for your Subaru’s cruise control light flashing. This includes a problem with the throttle control motor, the cruise control switch, the brake light switch, the cruise control actuator, and the ECU.

Malfunctioning of any of these parts can lead to a flashing cruise control light, and it’s important to get the issue resolved quickly as it can adversely affect the performance of your vehicle.

Failed control module, sensor, or switch issues

Aside from the mechanical components, a failed control module, sensor, or switch can also cause your Subaru cruise control light to flash. If any of these components fail, the cruise control light will start to flash. Here are a few common sources of this issue:

• Electrical connections wearing away
• Corroded wiring
• Malfunctioning switches
• Burned out control module.

It’s important to have your car checked by a qualified mechanic to determine the exact cause of the flashing light.

Throttle actuation problems

Frequently, issues with throttle actuation can also be the culprit behind a Subaru’s flashing cruise control light. When the cruise control light is flashing, it usually means the throttle actuator is in need of service. It can be caused by a malfunctioning throttle position sensor , a bad throttle body, or a faulty electronic throttle control unit.

In any of these cases, the throttle needs to be repaired or replaced. Proper troubleshooting is essential to identify the source of the issue and to ensure a proper repair.

Dirty or malfunctioning cameras (adaptive cruise control)

Continuing on from issues with throttle actuation, dirty or malfunctioning cameras can also be a cause of Subaru’s flashing cruise control light. Reasons include:

• Obstructions blocking the camera’s view
• Damaged camera lens
• Malfunctioning of the camera’s hardware
• Problems with the car’s software.

Dirt, grime, and corrosion can also be factors in camera failure. Be sure to have a professional check the camera’s condition to avoid further issues.

Solutions for Flashing Cruise Control Light

If you’re having trouble with your Subaru’s flashing cruise control light, don’t worry. There are several solutions you can try to get your car back to normal.

• Hook up an OBDII reader to get valuable information.
• Visit the service center at your nearest authorized Subaru dealer.
• Check or replace the brake switch.
• Even disconnect the positive battery cable for 10 minutes and step on the brake pedal for a minute.

Hook up an OBDII reader to get valuable information

Once you’ve hooked up an OBDII reader to your Subaru, you can start to get some valuable information that can help you solve why the cruise control light is flashing. It can:

• Show any trouble codes
• Help you diagnose electrical problems
• Diagnose the engine light
• Provide you with data about your vehicle’s performance.

With this information, you can get a better idea of why your cruise control light is flashing and how to fix it.

Visit the service center at your nearest authorized Subaru dealer

If you’re still unsure what the issue is after hooking up an OBDII reader, then you may want to consider visiting the service center at your nearest authorized Subaru dealer.

The staff at the center have the expertise to diagnose and repair any issues with your vehicle, and they’ll be able to provide you with insight into why the cruise control light is flashing.

They may even be able to suggest a repair or adjustment that can resolve the issue.

Taking your car to the service center is the best way to get the right advice and a quality repair.

Check/replace brake switch

Carrying on from the previous suggestion, the next solution might be to check or replace the brake switch, as it can sometimes be the source of the cruise control light flashing.

To do this, here are 4 steps to follow:

• Find the brake switch and disconnect the wires.
• Check the continuity of the switch with a multimeter.
• If the switch is defective, replace it with a new one.
• Reconnect the wires to the switch and test the cruise control light.

Disconnect the positive battery cable for 10 minutes and step on the brake pedal for a minute

Once the gas cap has been replaced, another solution to try if the cruise control light is still flashing is to disconnect the positive battery cable for 10 minutes and step on the brake pedal for a minute.

To do this:

• Find the positive battery cable.
• Unhook the cable and wait 10 minutes.
• Re-connect the cable.
• Step on the brake pedal for a minute.

This should reset the cruise control light and get your Subaru back on the road.

Final Words

It is important to check why your Subaru’s cruise control light is flashing in order to avoid any potential issues.

Taking the time to diagnose the cause of the flashing light will ensure that your car runs smoothly and safely.

Importance of checking the issue

It’s essential to get your Subaru checked as soon as possible if the cruise control light is flashing. Ignoring the issue could potentially lead to a more serious problem, such as:

• A malfunction in the car’s braking system.
• Damage to the car’s electronic components.
• An unexpected increase in fuel consumption .
• Unintended acceleration.

If you notice the cruise control light flashing, don’t hesitate to take your car to the nearest mechanic. Failing to address the issue can have costly consequences.

Be sure to get your car checked out as soon as possible.

About The Author

Start typing and press enter to search

Car Insurance

Home & renters insurance, car repair estimates, read car content, jerry data & research, why is my subaru’s cruise control light flashing.

The cruise control on my Subaru hasn’t been working for a few days now. When I try to turn it on, the cruise control light just flashes. Why is this happening and what can I do about it?

• Malfunctioning speed sensor
• Loose gas cap
• Failing brake pedal switch
• Traction control system issues
• Malfunctioning mechanical components (in older Subarus)

Join 4M+ members in lowering their car insurance

You might also be interested.

Why is My Cruise Control Not Working?

What Does the Subaru Traction Control Light Mean?

What Does the 2010 Subaru Forester Traction Control Light Mean?

Read Advice From Car Experts At Jerry

How to Get an Illinois Handicap Placard (and Who’s Eligible)

The Most Common 2021 Buick Encore GX Problems

Lexus UX Ground Clearance

What Others Are Asking

How do you repair your car in gta 4.

How much does it cost to replace a car starter?

Is there a way to not pay for car insurance?

Browse more content, car repair resources.

• Intake Manifold Gaskets Replacement Cost
• AC Receiver Dryer Replacement Cost
• Ignition Cable Spark Plug Wires Replacement Cost
• Manifold Absolute Pressure Sensor Map Sensor Replacement Cost
• Fuel Gauge Sender Replacement Cost

Insurance for Your Car

• Isuzu Ascender Insurance Cost
• Alfa Romeo Giulia Insurance Cost

Insurance in Your State

Insurance in your city.

• Lewes DE Insurance
• Greenville SC Insurance
• Monticello FL Insurance
• Southfield MI Insurance
• Moreno Valley CA Insurance

Easiest way to compare and buy car insurance

Car insurance by make, car insurance by model, car insurance by state, car insurance by city, car loan by make, car insurance by company, car loan by state, car repair by service.

Popular Searches

SUBARU STARLINK In-Vehicle Technology

Eyesight Driver Assist Technology

Parts and Accessories

Helpful Links

Customer Service

Vehicle Recalls

All Vehicles

Special Offers

Local Inventory

Our Company

Meet the Subaru Family

In-Vehicle Technology Help

Navigation Updates

Bluetooth ® Pairing and Apple CarPlay ® for Apple Devices

Bluetooth ® Compatibility

Bluetooth ® Pairing and Android Auto ™ for Android ™ Devices

HomeLink ® Programming Instructions

ABS warning light

If any of the following conditions occur, we recommend that you have the ABS system repaired at the first available opportunity by your SUBARU dealer:

• The warning light does not illuminate when the ignition switch is turned to the “ON” position.
• The warning light illuminates when the ignition switch is turned to the “ON” position, but it does not turn off even when the vehicle speed exceeds approximately 25 mph (40
• The warning light illuminates during driving.

When the warning light is on (and the brake system warning light is off), the ABS function shuts down. However, the conventional brake system continues to operate normally. The ABS warning light illuminates together with the brake system warning light if the EBD system malfunctions. For further details of the EBD system malfunction warning, refer to “Electronic Brake Force Distribution (EBD) system warning.”

If the warning light behavior is as described in the following conditions, the ABS system may be considered normal:

• The warning light illuminates when the ignition switch is turned to the “ON” position and turns off approximately 2 seconds after the engine has started.
• The warning light illuminates right after the engine is started but turns off immediately, remaining off.
• The warning light remains illuminated after the engine has been started, but it turns off when the vehicle speed reaches approximately 25 mph (40 km/h).
• The warning light illuminates during driving, but it turns off immediately and remains off.

When driving with an insufficient battery voltage such as when the engine is jump-started, the ABS warning light may illuminate. This is due to the low battery voltage and does not indicate a malfunction. When the battery becomes fully charged, the light will turn off.

This indicator illuminates when the CRUISE switch is pressed. 

When Adaptive Cruise Control is activated, this indicator changes from white to green. When the driver accelerates the vehicle by depressing the accelerator pedal while Adaptive Cruise Control is operating, the indicator changes from green to white.

The keyless access with push-button start system sounds a warning chime and flashes the access key warning light on the combination meter in order to minimize improper operations and help protect your vehicle from theft. When the warning chime sounds and/or the warning light flashes, take the appropriate action.

Never drive the vehicle if the indicator on the push-button ignition switch is flashing in green when starting the engine. This indicates the status that the steering wheel is not released and could result in an accident involving serious injury or death.

When starting the engine again after the operation indicator on the push-button ignition switch flashes in green, if the operation indicator is still flashing in green, there could be a steering lock malfunction. Contact your SUBARU dealer as soon as possible.

When the operation indicator on the push-button ignition switch flashes in orange, contact a SUBARU dealer immediately.

Even when the access key is within the operating ranges inside the vehicle, the access key warning for engine start may be provided depending on the status of the access key and the environmental conditions.

When the access key is taken out of the vehicle through an open window, the access key takeout warning or passenger access key takeout warning will not be provided.

This light flashes if the vehicle is driven with tires of differing diameters fitted on the wheels or with an excessively low air pressure in any of the tires.

Continuing to drive with the AWD warning light flashing can damage the powertrain. If the AWD warning light starts to flash, promptly park in a safe place and check whether the tires have differing diameters and whether any of the tires has an excessively low inflation pressure.

If the temporary spare tire is used, the AWD warning light may flash. Use of the temporary spare tire should therefore be restricted to the minimum time necessary. Replace the temporary spare tire with a conventional tire as soon as possible.

If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.

Transmission control system warning

If the “AT OIL TEMP” warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately.

When the AUTO [+] mode is set, the AUTO [+] indicator appears.

When the AUTO [−] mode is set, the AUTO [−] indicator appears.

This light illuminates when the automatic headlight beam leveler does not operate normally. If this light illuminates while driving or does not turn off approximately 3 seconds after turning the ignition switch to the “ON” position, have your vehicle inspected at your SUBARU dealer.

This indicator light illuminates when the engine has been temporarily stopped by the Auto Start Stop system. It will turn off when the engine is restarted.

When a vehicle is stopped, the indicator light illuminates when the operating conditions of idling stop are not meet. The light will turn off when the vehicle starts driving.

This light will illuminate when “Auto Start Stop” is touched to prevent the Auto Start Stop system from operating. It will turn off when “Auto Start Stop” is touched once more to enable operation of the Auto Start Stop system. 

If the Auto Start Stop OFF indicator light does not illuminate when “Auto Start Stop” is touched, contact a SUBARU dealer for an inspection as soon as possible.

Auto Start Stop warning light (yellow)

• If the Auto Start Stop warning light is flashing in yellow, there may be a malfunction in the Auto Start Stop system. We recommend that you have your vehicle inspected at a SUBARU authorized dealer as soon as possible.
• If the Auto Start Stop warning light is illuminated in yellow at any time other than in the following cases, and will not turn off even if the Auto Start Stop OFF switch is pushed and held, we recommend that you have your vehicle inspected at a SUBARU dealer as soon as possible.

The Auto Start Stop warning light will illuminate in yellow if you open the engine hood when the engine has been temporarily stopped by the Auto Start Stop system. In this case, to ensure safety, the engine will not be automatically restarted, even if you release the brake pedal. Use normal operation to restart the engine.

Auto Start Stop OFF indicator light (yellow)

This light will illuminate in yellow when the Auto Start Stop OFF switch is pressed to prevent the Auto Start Stop system from operating. It will turn off when the Auto Start Stop OFF switch is pressed once more to enable operation of the Auto Start Stop system.

This indicator light illuminates when the Auto Vehicle Hold is activated.

If the Auto Vehicle Hold ON indicator light does not illuminate even when the Auto Vehicle Hold switch is pressed to activate the Auto Vehicle Hold function, the electronic parking brake system may be malfunctioning.

Auto Vehicle Hold function

The Auto Vehicle Hold function will automatically keep the vehicle held even after releasing the brake pedal when the vehicle is at a complete stop, such as at traffic signals. The function will be canceled by either of the following operations.

• Depressing the accelerator pedal.
• Depressing the brake pedal again.
• Do not use the Auto Vehicle Hold function on a steep hill or slippery road. The vehicle may move even when using the Auto Vehicle Hold function, causing serious injury or accidents.
• When you are going to park your vehicle.
• When passengers are getting in or out of the vehicle.
• When you are loading or unloading.
• When using the Auto Vehicle Hold function, do not release the brake pedal before the Auto Vehicle Hold operation indicator illuminates. The vehicle may move unexpectedly, causing serious injury or accidents.
• When washing your vehicle in an automatic car wash.
• When being towed.
• When stopping on a steep slope with the Auto Vehicle Hold function turned on, the electronic parking brake may be automatically applied. Then the electronic parking brake indicator light will flash. In such a case, depress and hold the brake pedal while stopping. Otherwise, the vehicle may move.
• When being towed, turn off the Auto Vehicle Hold function.

We recommend turning on the Auto Vehicle Hold function when stopping on an incline. If the Auto Vehicle Hold function is turned off, the vehicle may roll backward when driving off.

To turn on:

Press the Auto Vehicle Hold switch when the Auto Vehicle Hold ON indicator light is off. Then the Auto Vehicle Hold ON indicator light will illuminate.

To turn off:

Press the Auto Vehicle Hold switch when the Auto Vehicle Hold ON indicator light illuminates. Then the Auto Vehicle Hold ON indicator light will turn off.

• When the electronic parking brake system has a malfunction while the Auto Vehicle Hold function is turned on, a chirp will sound, the Auto Vehicle Hold ON indicator light will turn off and the brake system warning light will turn on.
• If you press and hold the Auto Vehicle Hold switch for more than 30 seconds, the Auto Vehicle Hold ON indicator light will turn off, and the system will ignore any further pressing of the switch. To activate the switch again, restart the engine.
• When the Auto Vehicle Hold function is deactivated while the Auto Vehicle Hold function has a malfunction, if you press the Auto Vehicle Hold switch, a chirp will sound.

To operate the Auto Vehicle Hold function

Stop the vehicle by depressing the brake pedal when all of the following conditions are met. Then the Auto Vehicle Hold function will operate.

• All doors are closed.
• The driver’s seatbelt is fastened.
• The select lever is in a position other than the “P” position.

While the vehicle is kept held by the Auto Vehicle Hold function, the Auto Vehicle Hold operation indicator light will illuminate.

To release the Auto Vehicle Hold function

Perform any of the following operations to release the Auto Vehicle Hold function:

• Depress the accelerator pedal.
• Apply the electronic parking brake.
• Shift the select lever to the “P” position with the brake pedal pressed.
• Press the Auto Vehicle Hold switch with the brake pedal pressed.

When the Auto Vehicle Hold function is released, the Auto Vehicle Hold operation indicator light will turn off.

Under any of the following conditions, the Auto Vehicle Hold function will be automatically released and the electronic parking brake will be automatically applied.

• The Auto Vehicle Hold function has been in operation for 10 minutes.
• The driver’s seatbelt is unfastened.
• The ignition switch is turned to the “LOCK”/“OFF” position.
• The vehicle is stopped on a steep slope.
• The Auto Vehicle Hold function is malfunctioning.

In such cases, the Auto Vehicle Hold operation indicator light will turn off and the electronic parking brake indicator light will illuminate.

When the electronic parking brake is automatically applied with the vehicle kept held by the Auto Vehicle Hold function, release the electronic parking brake by either of the following operations before starting off. Then make sure that the electronic parking brake indicator light is off:

• Depress the accelerator pedal with the driver’s seatbelt fastened and with the doors closed.
• Press the electronic parking brake switch with the brake pedal depressed.

Under certain conditions, including a malfunction of the Auto Vehicle Hold, a warning buzzer will sound and a warning message will appear on the combination meter display (color LCD). All warning messages should be strictly observed:

• On a steep slope, the vehicle cannot be kept held by the Auto Vehicle Hold function. In such a case, depress and hold the brake pedal.
• When holding on a steep slope with the Auto Vehicle Hold function activated, the electronic parking brake may automatically be applied after stopping, then the electronic parking brake indicator light may flash. In such a case, depress and hold the brake pedal while held. Otherwise, the vehicle may move. When getting out of the vehicle, stop the vehicle on a flat surface, then apply the electronic parking brake.
• If the Auto Vehicle Hold ON indicator light does not illuminate even after pressing the Auto Vehicle Hold switch with the operating conditions met, the function may have a malfunction. Contact your SUBARU dealer for an inspection.
• You may hear a sound while the Auto Vehicle Hold function is keeping your vehicle held. This is normal, and does not represent a malfunction.
• While the vehicle is kept held by the Auto Vehicle Hold function, the brake pedal may feel stiff. However, this is not a malfunction.
• When using the Auto Vehicle Hold function, depress the brake pedal firmly. Otherwise, the Auto Vehicle Hold may not operate.
• When the Auto Vehicle Hold switch is pressed and held for more than 30 seconds, the Auto Vehicle Hold ON indicator light will turn off and further operation of the switch will be ignored. To make the switch usable again, turn the ignition switch to the “LOCK”/“OFF” position and then turn it to the “ON” position.

This indicator light illuminates while the vehicle is stopped by the Auto Vehicle Hold function.

Driving with the brake system warning light on is dangerous. This indicates your brake system may not be working properly. If the light remains illuminated, have the brakes inspected by a SUBARU dealer immediately.

• If at all in doubt about whether the brakes are operating properly, do not drive the vehicle. Have your vehicle towed to the nearest SUBARU dealer for repair.

This light has the following functions:

Parking brake warning

The light illuminates with the parking brake applied while the ignition switch is in the “ON” position. It turns off when the parking brake is fully released.

Brake fluid level warning

This light illuminates when the brake fluid level has dropped to near the “MIN” level of the brake fluid reservoir with the ignition switch in the “ON” position and with the parking brake fully released. If the brake system warning light should illuminate while driving (with the parking brake fully released and with the ignition switch positioned in “ON”), it could be an indication of leaking of brake fluid or worn brake pads. If this occurs, immediately stop the vehicle at the nearest safe place and check the brake fluid level. If the fluid level is below the “MIN” mark in the reservoir, do not drive the vehicle. Have the vehicle towed to the nearest SUBARU dealer for repair.

Electronic Brake Force Distribution (EBD) system warning

The brake system warning light also illuminates if a malfunction occurs in the EBD system. In that event, it illuminates together with the ABS warning light.

The EBD system may be malfunctioning if the brake system warning light and ABS warning light illuminate simultaneously during driving. Even if the EBD system fails, the conventional braking system will still function. However, the rear wheels will be more prone to locking when the brakes are applied harder than usual and the vehicle’s motion may therefore become somewhat harder to control.

If the brake system warning light and ABS warning light illuminate simultaneously, take the following steps:

• Stop the vehicle in the nearest safe, flat place.
• Shut down the engine, apply the parking brake and then restart it.
• Release the parking brake. If both warning lights turn off, the EBD system may be malfunctioning. Drive carefully to the nearest SUBARU dealer and have the system inspected.
• If both warning lights illuminate again and remain illuminated after the engine has been restarted, shut down the engine again, apply the parking brake, and check the brake fluid level.
• If the brake fluid level is not below the “MIN” mark, the EBD system may be malfunctioning. Drive carefully to the nearest SUBARU dealer and have the system inspected.
• If the brake fluid level is below the “MIN” mark, DO NOT drive the vehicle. Instead, have the vehicle towed to the nearest SUBARU dealer for repair.

Vacuum pump system warning (turbo models, except STI)

This light illuminates when a malfunction is detected in the vacuum pump system.

The vacuum pump system assists the boost pressure when driving at high altitudes while the engine is cold.

Electronic parking brake system warning

The brake system warning light flashes when the electronic parking brake system is malfunctioning. If the warning light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer.

The brake system warning light remains illuminated when the parking brake cannot be released even if the parking brake switch is pulled.

Parking brake apply inhibit warning

The brake system warning light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated when the parking brake cannot be applied.

Frequent operation warning

The brake system warning light flashes for 20 seconds and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system.

Wait until the warning light turns off.

Blind Spot Detection/Rear Cross Traffic Alert (BSD/RCTA) warning indicator

This warning indicator appears on the combination meter display when the BSD (Blind Spot Detection) or RCTA (Rear Cross Traffic Alert) is not functioning for any reason. If this indicator remains displayed, have your vehicle inspected by your SUBARU dealer as soon as possible.

Blind Spot Detection/Rear Cross Traffic Alert (BSD/RCTA) indicator

The indicator appears when the BSD/ RCTA OFF switch is pressed to deactivate the BSD/RCTA or when the BSD/RCTA is suspended temporarily.

This indicator illuminates when the charge cable is connected to the vehicle.

If this light illuminates when the engine is running, it may indicate that the charging system is not working properly.

If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the alternator belt. If the belt is loose, broken or if the belt is in good condition but the light remains illuminated, contact your nearest SUBARU dealer immediately.

If the CHECK ENGINE light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious damage, which may not be covered by your vehicle’s warranty.If this light illuminates steadily or blinks while the engine is running, it may indicate that there is a problem or potential problem somewhere in the emission control system.

If the light illuminates steadily

If the light illuminates steadily while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by an authorized SUBARU dealer immediately.

This light also illuminates when the fuel filler cap is not tightened until it clicks.

If you have recently refueled your vehicle, the cause of the CHECK ENGINE warning light/malfunction indicator light illuminating could be a loose or missing fuel filler cap.

Remove the cap and retighten it until it clicks. Make sure nothing is interfering with the sealing of the cap. Tightening the cap will not make the CHECK ENGINE warning light turn off immediately. It may take several driving trips. If the light does not turn off, take your vehicle to your authorized SUBARU dealer immediately.

If the light is blinking

If the light is blinking while driving, an engine misfire condition has been detected which may damage the emission control system.

To prevent serious damage to the emission control system, you should do the following:

• Reduce vehicle speed.
• Avoid hard acceleration.
• Avoid steep uphill grades.
• Reduce the amount of cargo, if possible.
• If towing a trailer, stop doing so as soon as possible.

The CHECK ENGINE warning light may stop blinking and illuminate steadily after several driving trips. You should have your vehicle checked by an authorized SUBARU dealer immediately.

After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves in any of the following ways, the electrical system may be malfunctioning. Contact your SUBARU dealer immediately for an inspection:

• It remains blinking in RED .
• It remains illuminated in RED for more than 2 seconds.
• It remains blinking in RED and BLUE alternately.

While driving, if this indicator light/warning light behaves in any of the following ways, take the specified appropriate measure listed below:

• Safely stop the vehicle as soon as possible, and refer to the emergency steps to take in the case of engine overheating. After that, have the system checked by your nearest SUBARU dealer.
• The electrical system may be malfunctioning. Contact your SUBARU dealer for an inspection.

This coolant temperature low indicator light/coolant temperature high warning light has the following three functions:

• Illumination in BLUE indicates insufficient warming up of the engine
• Blinking in RED indicates that the engine is close to overheating.
• Illumination in RED indicates overheating condition of the engine. 

For a system check, this indicator light/warning light illuminates in RED for approximately 2 seconds when the ignition switch is turned to the “ON” position. After that, this indicator light/warning light changes to BLUE and maintains illumination in BLUE . This BLUE illuminated light turns off when the engine is warmed up sufficiently.

If the engine coolant temperature increases over the specified range, the indicator light/warning light blinks in RED . At this time, the engine is close to overheating.

If the engine coolant temperature increases further, the indicator light/warning light illuminates in RED continuously. At this time, the engine may be overheating. When the indicator light/warning light blinks in RED or illuminates in RED , safely stop the vehicle as soon as possible, and refer to the emergency steps to take in the case of engine overheating. After that, have the system checked by your nearest SUBARU dealer. Also, if the indicator light/warning light often blinks in RED , the electrical system may be malfunctioning. Contact your SUBARU dealer for an inspection.

If the engine is restarted after a certain driving condition, this indicator light/warning light may illuminate in RED . However, this is not a malfunction if the indicator light/warning light turns off after a short time.

This indicator illuminates when the Following distance setting switch is pressed and held after pressing the CRUISE switch. 

This indicator changes from white to green when Conventional Cruise Control is activated.

This light illuminates when the cruise control main button is pressed to activate the cruise control function. If this light blinks, do not use the cruise control.

This light illuminates when vehicle speed has been set to use the cruise control function.

This light illuminates if the brake pedal is not depressed in the following conditions:

• The Auto Vehicle Hold switch is pressed to deactivate the Auto Vehicle Hold function while the vehicle is stopped by the Auto Vehicle Hold function.
• The electronic parking brake is released.

When any of the doors, the rear gate (Outback) or the trunk lid (Legacy) is not fully closed, the door open indicator appears. This function is effective even if the ignition switch is in the “LOCK”/“OFF” or “ACC” position (all models) or the key is removed from the ignition switch (models without “keyless access with push-button start system”).

The open door is indicated by the corresponding part of the door open indicator.

Always make sure this indicator does not appear before you start to drive.

The warning light illuminates if any door or the rear gate is not fully closed. This function is effective even if the ignition switch is in the “LOCK”/“OFF” or “ACC” position, or the key is removed from the ignition switch.

Always make sure this light is not illuminated before you start to drive.

This indicator illuminates when the Driver Monitoring System OFF switch is pressed to deactivate the Driver Monitoring System.

This indicator illuminates when the Driver Monitoring System is activated.

This indicator illuminates when the Driver Monitoring System is temporarily stopped.

The Driver Monitoring System stops temporarily in the following circumstances:

• The temperature of the Driver Monitoring System unit is high.

This warning illuminates if the Driver Monitoring System malfunctions. Have your vehicle inspected at a SUBARU dealer as soon as possible.

This indicator functions while the ignition switch is “ON.” When it appears, it indicates that the driver’s control center differential is set to the auto mode. It disappears when the driver’s control center differential is set to the manual mode.

When you select the manual mode of the driver’s control center differential, the initial limited slip differential (LSD) torque that is currently selected for the center differential is indicated by the illumination of this indicator.

Warning indicator

All the indicators will flash in the event that the driver’s control center differential has a malfunction. Have the vehicle inspected by your SUBARU dealer. If a malfunction occurs in the vehicle (for example, when the rear differential oil temperature warning light illuminates or the AWD warning light blinks), all of the indicators may disappear and the setting value for the initial limited slip differential (LSD) torque of the driver’s control center differential (C.DIFF/DCCD) may be cancelled. However, it does not indicate a malfunction of the C.DIFF/DCCD itself.

Parking brake indicator

• When you release the electronic parking brake while the engine is running, the electronic parking brake indicator light will turn off. However, if the light still illuminates, stop the vehicle in a safe place immediately and have the system inspected by a SUBARU dealer.
• If the electronic parking brake indicator light flashes, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in a safe location, use tire stops under the tires to prevent the vehicle from moving and contact your SUBARU dealer.
• When the ignition switch is turned to the “LOCK”/“OFF” position with the electronic parking brake applied, the electronic parking brake indicator light remains illuminated for approximately 30 seconds and then turns off.
• When the electronic parking brake switch is pulled to apply the electronic parking brake while the ignition switch is in the “LOCK”/“OFF” position, the electronic parking brake indicator light illuminates, remains illuminated for approximately 30 seconds and then turns off.
• The indicator light turns off when the electronic parking brake is released.
• The electronic parking brake indicator light may flash immediately after the engine is started. However, it is not malfunctioning if the indicator light turns off after the electronic parking brake is released.
• The electronic parking brake indicator light may flash after the electronic parking brake is frequently applied and released. However, the electronic parking brake system is not malfunctioning if the light turns off for a short period of time.

The electronic parking brake indicator light flashes when the electronic parking brake system is malfunctioning. If the indicator light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer.

The electronic parking brake indicator light remains illuminated when the parking brake cannot be released even if the parking brake switch is pushed.

The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated when the parking brake cannot be applied.

The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system.

Wait until the indicator light turns off.

The warning light illuminates if the engine hood is not fully closed. This function is effective even if the ignition switch is in the “LOCK”/“OFF” or “ACC” position, or the key is removed from the ignition switch.

This light illuminates when the engine oil level decreases to the lower limit.

If the engine low oil level warning light illuminates while driving, park the vehicle in a safe and level location, and then check the engine oil level. When the engine oil level is not within the normal range, refill with engine oil.

If the warning light does not turn off after refilling the engine oil, or the warning light illuminates even though the engine oil level is within the normal range, have the vehicle checked by a SUBARU dealer.

After replacing or adding the engine oil, if the engine oil level is within the normal range when restarting the engine on a level surface, the warning light will turn off.

The warning light may illuminate temporarily in the following conditions because a low oil level may be detected as a result of significant oil movement in the engine:

• When the vehicle is considerably inclined on an uphill or steep slope.
• When the vehicle has continuously accelerated and decelerated.
• When the vehicle is continuously turned.
• When the vehicle is driven on a road that alternates continuously between uphill and downhill.

This lamp illuminates in the following cases:

• When driving only using the electric motor power
• When the engine is automatically stopped by the hybrid system

This indicator illuminates when the EyeSight system is temporarily stopped. 

When the ignition switch is placed in the ON position, this indicator will illuminate if the CRUISE switch or the Lane Centering switch is set to ON within approximately 7 seconds of the engine starting. It turns off when approximately 7 seconds have elapsed since the engine started. 

When it is illuminated, none of the EyeSight function can be used except for Conventional Cruise Control.

This indicator illuminates or flashes when a malfunction occurs in the EyeSight system. 

When it is illuminated or flashing, none of the EyeSight functions can be used (including Adaptive Cruise Control and Pre-Collision Braking System, etc.).

Indicates the following distance setting that was set with the following distance setting switch.

This indicator light illuminates while the front fog lights are illuminated.

The front passenger’s frontal airbag ON and OFF indicators show you the status of the front passenger’s SRS frontal airbag.

The indicators are located next to the clock in the center portion of the dashboard.

When the ignition switch is turned to the “ON” position, both the ON and OFF indicators illuminate for 6 seconds during which time the system is checked. Following the system check, both indicators turn off for 2 seconds. After that, one of the indicators illuminates depending on the status of the front passenger’s SRS frontal airbag determined by the SUBARU advanced frontal airbag system monitoring.

If the front passenger’s SRS frontal airbag is activated, the passenger’s frontal airbagON indicator will illuminate while the OFF indicator will remain off.

If the front passenger’s SRS frontal airbag is deactivated, the passenger’s frontal airbag ON indicator will remain off while the OFF indicator will illuminate.

With the ignition switch turned to the “ON” position, if both the ON and OFF indicators remain illuminated or off simultaneously even after the system check period, the system is malfunctioning. Contact your SUBARU dealer immediately for an inspection.

If the front passenger’s SRS frontal airbag is activated, the passenger’s frontal airbag ON indicator will illuminate while the OFF indicator will remain off.

Your vehicle is equipped with a seatbelt warning device at the driver’s and front passenger’s seat, as required by current safety standards.

With the ignition switch turned to the “ON” position, this device reminds the driver and front passenger to fasten their seatbelts by illuminating the warning lights and sounding a chime.

If the driver and/or front passenger have/has not yet fastened the seatbelt(s) when the ignition switch is turned to the “ON” position, the seatbelt warning light(s) will flash for 6 seconds, to warn that the seatbelt(s) is/are unfastened. If the driver’s seatbelt is not fastened, a chime will also sound simultaneously.

If the driver’s and/or front passenger’s seatbelt(s) are/is still not fastened 6 seconds later, the seatbelt warning device operates as follows according to the vehicle speed:

• At speeds lower than approximately 9 mph (15 km/h) the warning light(s) for unfastened seatbelt(s) will alternate between steady illumination and flashing at 15-second intervals. The chime will not sound.
• At speeds higher than approximately 9 mph (15 km/h) the warning light(s) for unfastened seatbelt(s) will alternate between flashing and steady illumination at 15-second intervals and the chime will sound while the warning light(s) is/are flashing.

It is possible to cancel the warning operation that follows the 6-second warning after turning ON the ignition switch. When the ignition switch is turned ON next time, however, the complete sequence of the warning operation resumes. For further details about canceling the warning operation, please contact your SUBARU dealer.

If there is no passenger on the front passenger’s seat, the seatbelt warning device for the front passenger’s seat will be deactivated. The front passenger’s occupant detection system monitors whether or not there is a passenger on the front passenger’s seat. Observe the following precautions. Failure to do so may prevent the device from functioning correctly or cause the device to fail:

• Do not install any accessory such as a table or TV onto the seatback.
• Do not store a heavy load in the seatback pocket.
• Do not allow the rear seat occupant to place his/her hands or legs on the front passenger’s seatback, or allow him/her to pull the seatback.
• Do not use front seats with their backward-forward position and seatback not being locked into place securely. If any of them are not locked securely, adjust them again.

If the seatbelt warning device for the front passenger’s seat does not function correctly (e.g., it is activated even when the front passenger’s seat is empty or it is deactivated even when the front passenger has not fastened his/her seatbelt), take the following actions:

• Ensure that no article is placed on the seat other than a child restraint system and its child occupant, although we strongly recommend that all children sit in the rear seat properly restrained.
• Ensure that there is no article left in the seatback pocket.
• Ensure that the backward-forward position and seatback of the front passenger’s seat are locked into place securely by moving the seat back and forth.

If the seatbelt warning device for the front passenger’s seat still does not function correctly after taking relevant corrective actions described above, immediately contact your SUBARU dealer for an inspection.

This indicator light illuminates under the following conditions:

• When the light switch is turned to either position
• When the light control switch is in the “AUTO” position and the headlights illuminate automatically.

This light illuminates when the high beam assist function is activated.

This warning indicator appears when the high beam assist function malfunctions. When this warning indicator appears, have your vehicle inspected by your SUBARU dealer.

This light shows that the headlights are in the high beam mode.

This indicator light also illuminates when the headlight flasher is operated.

This indicator illuminates while the hill descent control function is in standby. It will flash while the hill descent control function is operating. It will turn off when the hill descent control function is not available.

Hill start assist warning light

While the engine is running, if there are any malfunctions in the Hill start assist system, the warning light will illuminate.

When the Hill start assist warning light illuminates, have the vehicle inspected at an authorized SUBARU dealer.

Hill start assist OFF indicator light

While the Hill start assist system is deactivated, the Hill start assist OFF indicator light illuminates continuously to inform the driver that the Hill start assist system is not operational.

The HOLD indicator illuminates when the stay-stopped function is operated while Adaptive Cruise Control is on.

When in the Hybrid Battery Charge Mode, this indicator illuminates.

When in the Hybrid Battery Save Mode, this indicator illuminates.

The indicator illuminates when a malfunction occurs in the hybrid system. Contact your SUBARU dealer immediately for an inspection.

This light illuminates when the hybrid system has started. It turns off when the hybrid system has been turned off.

If the Hybrid READY Indicator Light does not illuminate when the engine has been started, have your vehicle checked at a SUBARU dealer.

This warning light illuminates when the temperature of the inverter with converter assembly is high. Contact your SUBARU dealer immediately for an inspection.

When the outside temperature becomes 37°F (3°C) or less, the icy road surface warning screen interrupts to inform the driver that the road surface may be frozen.

The outside temperature indicator shows the temperature in the area around the sensor. Therefore, the temperature indication may differ from the actual outside air temperature.

The icy road surface warning screen should be treated only as a guide. Be sure to check the condition of the road surface before driving.

Once the icy road surface warning screen appears, it will not disappear unless the outside temperature has increased to 41°F (5°C) or higher.

This indicator shows the current SI-DRIVE mode.

This indicator illuminates when Lane Centering Function is turned on by pressing the Lane Centering switch (only when Adaptive Cruise Control is on). 

The indicator turns off when Adaptive Cruise Control is off. 

While Lane Centering Function is operating, the indicator changes from white to green.

This indicator light illuminates when Lane Departure Warning and Lane Sway Warning are off. 

It also illuminates when the ignition switch is turned to the ON position. Approximately 7 seconds after the engine starts, the Lane Departure Warning OFF indicator light will turn off or remain illuminated depending on the current status (ON or OFF).

This indicator illuminates in gray when Lane Departure Prevention Function is turned on. 

It illuminates in white under the following conditions:

• Lane Departure Prevention Function goes into standby status
• Land Centering Function is operating by detecting the lane markings

It illuminates in yellow when Lane Departure Prevention Function is operating.

When Adaptive Cruise Control is activated or when the stay-stopped function is engaged, this indicator illuminates when a vehicle in front has been detected.

This light illuminates if the LED headlights malfunction. Have your vehicle inspected at a SUBARU dealer as soon as possible.

The low fuel warning light illuminates when the tank is nearly empty, at approximately 2.6 US gal (10.0 liters, 2.2 Imp gal). It only operates when the ignition switch is in the “ON” position.

Promptly put fuel in the tank whenever the low fuel warning light illuminates. Engine misfires as a result of an empty tank could cause damage to the engine.

This light does not turn off unless the tank is replenished up to an internal fuel quantity of approximately 4.5 US gal (17 liters, 3.7 Imp gal).

When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TPMS) is functioning properly. If there is no problem and all tires are properly inflated, the light will turn off. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

Should the warning light illuminate steadily after blinking for approximately one minute, have the system inspected by your nearest SUBARU dealer as soon as possible.

If this light does not illuminate briefly after the ignition switch is turned ON or the light illuminates steadily after blinking for approximately one minute, you should have your Tire Pressure Monitoring System checked at a SUBARU dealer as soon as possible.

If this light illuminates while driving, never brake suddenly and keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. Otherwise an accident involving serious vehicle damage and serious personal injury could occur.

If this light still illuminates while driving after adjusting the tire pressure, a tire may have significant damage and a fast leak that causes the tire to lose air rapidly. If you have a flat tire, replace it with a spare tire as soon as possible.When a spare tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the Low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/or system resetting.

If the light illuminates steadily after blinking for approximately one minute, promptly contact a SUBARU dealer to have the system inspected.

The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. After any change to tire pressure(s), the tire pressure monitoring system will not re-check tire inflation pressures until the vehicle is first driven more than 25 mph (40 km/h). After adjusting the tire pressures, increase the vehicle speed to at least 25 mph (40 km/h) to start the TPMS re-checking of the tire inflation pressures. If the tire pressures are now above the severe low-pressure threshold, the low tire pressure warning light should turn off a few minutes later. Therefore, be sure to install the specified size for the front and rear tires.

If this light illuminates when the engine is running, it may indicate that the engine oil pressure is low and the lubricating system is not working properly.

If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the engine oil level. If the oil level is low, add oil immediately. If the engine oil is at the proper level but the light remains illuminated, contact your nearest SUBARU dealer immediately.

This indicator light illuminates when the One-touch Interior Illumination function is activated.

This light blinks when a malfunction occurs in the pedestrian alert system. Contact a SUBARU dealer for an inspection.

This warning light illuminates when the ignition switch is turned to the “ON” position and turns off after the engine has started. This indicates that the warning system is working properly.

While the engine is running, this warning light illuminates when a malfunction has been detected in the electric power steering system.

When the power steering warning light is illuminated, there may be more resistance when the steering wheel is operated. Drive carefully to the nearest SUBARU dealer and have the vehicle inspected immediately. 

If the steering wheel is operated in the following ways, the power steering control system may temporarily limit the power assist in order to prevent the system components, such as the control computer and drive motor, from overheating:

• The steering wheel is operated frequently and turned sharply while the vehicle is maneuvered at extremely low speeds, such as while frequently turning the steering wheel during parallel parking.
• The steering wheel remains in the fully turned position for a long period of time.

At this time, there will be more resistance when steering. However, this is not a malfunction. Normal steering force will be restored after the steering wheel is not operated for a while and the power steering control system has an opportunity to cool down. However, if the power steering is operated in a non-standard way, which causes power assist limitation to occur too frequently, that may result in a malfunction of the power steering control system.

This indicator light illuminates when Pre-Collision Braking System and Pre-Collision Throttle Management are off. 

It also illuminates when the ignition switch is turned to the ON position, and then turns off approximately 7 secods after the engine starts.

This indicator illuminates if the Reverse Automatic Braking System malfunctions.

This indicator illuminates when the Reverse Automatic Braking System is turned OFF, or when the Reverse Automatic Braking System is suspended temporarily.

The READY indicator illuminates when Adaptive Cruise Control and Conventional Cruise Control can be activated.

If the R.DIFF TEMP warning light illuminates, reduce vehicle speed and stop the vehicle in a safe location as soon as possible. Continuing to drive with this light illuminated may damage the rear differential and other parts of the powertrain. 

If this light illuminates when the engine is running, it may indicate that the rear differential oil temperature is too hot. 

At this time, the driver’s control center differential will automatically cancel the current torque-distribution ratio setting and adopt its minimum ratio. 

If the light illuminates while driving, reduce vehicle speed and stop the vehicle in the nearest safe location. Park the vehicle for several minutes. After the light turns off, you can start driving. If the light does not turn off, contact the nearest SUBARU dealer for service. 

If the tire pressures are not correct and/or the tires are not all the same size and brand, the rear differential will be heavily loaded when the vehicle is driven, resulting in an abnormally high oil temperature. 

The rear differential oil will deteriorate if its temperature increases enough for the rear differential oil temperature warning light to illuminate. It is advisable to have the rear differential oil replaced as soon as possible.

With the ignition switch turned to the “ON” position, the seatbelt warning light and chime reminds the rear passenger to fasten their seatbelt by illuminating these warning lights. 

The driver must check that the all passengers have fastened their seatbelts properly since the seat- belt warning system may not detect passengers under the following circumstances:

• When cushions or child restraint systems, etc., are used.
• When a child or small adult is sitting in the seat.

Observer the following precautions:

• Do not apply any strong impact to the rear seat.
• Do not fold the seatback forward when objects are on the seat.
• Do no spill liquid on the rear seat. If liquid is spilled, wipe it off immediately.
• Do not remove or disassemble the rear seat. 

The seatbelt warning system of the rear seat detects if the seat is occupied by a passenger. Heavy cargo or large pets on the rear seat may result in the activation of the passenger seatbelt warning light and chime. Fastening the rear seatbelt prior to loading cargo or large pets will avoid activating the passenger seatbelt warning light and chime. 

When folding the rear seat, ensure that the seat is empty prior to folding. Items caught between the seat bottom and seatback, when folded, may damage the seat surface or activate the passenger seatbelt warning light and chime. 

Operation  

If passengers in the rear seats do not fasten their seatbelts while the ignition switch is turned to the “ON” position, the seatbelt warning lights will illuminate or blink to indicate that their seatbelts are not fastened. 

If the rear passenger’s seatbelt(s) are/is still not fastened while driving, the seatbelt warning system operates as follows according to the vehicle speed:

• The warning light will illuminate when driving approximately 4 mph (6 km/h) or less.
• When driving approximately between 4 mph (6 km/h) and 13 mph (20 km/h), if the seatbelts are not fastened for 50 seconds, the seatbelt warning lights will blink, and a warning chime will sound. The chime will make a peep sound for 15 seconds, and it then will become louder and continue for 35 seconds. The warning light will blink for 50 seconds, then it will illuminate steadily, and the chime will stop.
• When driving more than approximately 13 (20 km/h), if the seatbelts are not fastened for 35 seconds, the warning lights of the unfastened seatbelts will blink, and a chime will sound loudly. If the rear seatbelts are not fastened after 35 seconds, the blinking warning light will illuminate steadily, and the chime will stop. The warning lights will continue to illuminate until their seatbelts are fastened. 

The warning light will turn off and the warning chime will stop when the seatbelt is fastened. 

The seatbelt warning light can be cancelled. However, when the ignition switch is turned to the “ON” position after it is turned to the “OFF” position, the warning system settings will be restored. For details about the warning cancellation, contact a SUBARU dealer. 

This indicator light illuminates when the engine speed reaches the level that was previously set. This indicator light also flashes when the tachometer needle enters the red zone.

Your vehicle is equipped with a seatbelt warning device at the driver’s and front passenger’s seat, as required by current safety standards. 

With the ignition switch turned to the “ON” position, this device reminds the driver and front passenger to fasten their seatbelts by illuminating the warning lights in the locations indicated in the following illustration and sounding a chime. 

If the driver and/or front passenger have/has not yet fastened the seatbelt(s) when the ignition switch is turned to the “ON” position, the seatbelt warning light(s) will flash for 6 seconds, to warn that the seatbelt(s) is/are unfastened. If the driver’s seatbelt is not fastened, a chime will also sound simultaneously. 

• At speeds higher than approximately 9 mph (15 km/h) the warning light(s) for unfastened seatbelt(s) will alternate between flashing and steady illumination at 15-second intervals and the chime will sound while the warning light(s) is/are flashing. 

It is possible to cancel the warning operation that follows the 6-second warning after turning ON the ignition switch. When the ignition switch is turned ON next time, however, the complete sequence of the warning operation resumes. For further details about canceling the warning operation, please contact your SUBARU dealer. 

• Do not use front seats with their backward-forward position and seatback not being locked into place securely. If any of them are not locked securely, adjust them again. 
• Ensure that the backward-forward position and seatback of front passenger’s seat are locked into place securely by moving the seat back and forth. 

If still the seatbelt warning device for front passenger’s seat does not function correctly after taking relevant corrective actions described above, immediately contact your SUBARU dealer for an inspection. 

This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system. 

Alarm system 

It blinks to show the driver the operational status of the alarm system. 

Immobilizer system 

The security indicator light starts blinking in the following conditions. 

For models with “keyless access with push-button start system”: 

Immediately after the push-button ignition switch is turned to the “OFF” position. 

Immediately after the driver’s door is opened or closed when all of the following conditions are met:

• The push-button ignition switch is in the “ON” or “ACC” position.
• The access key is outside the vehicle.
• The engine is not running. 

For models without “keyless access with push-button start system”:  

Approximately 60 seconds after the ignition switch is turned from the “ON” position to the “ACC” or “LOCK” position. 

Immediately after the key is pulled out. If the indicator light does not blink in the above conditions, it may indicate that immobilizer system may be malfunctioning. Contact your nearest SUBARU dealer immediately. 

In the event that an unauthorized key (for example, an unauthorized duplicate) is used, the security indicator light illuminates. 

The security indicator light remains off in the following conditions. This is normal and does not indicate a malfunction. 

Models with “keyless access with push-button start system”:

• While the engine is running.
• The push-button ignition switch has been turned to the “ON” or “ACC” position and the driver’s door has not been opened or closed. 

Models without “keyless access with push-button start system”:

• For approximately 60 seconds after the ignition switch is turned from the “ON” position to the “ACC” or “LOCK” position. 

Even if the security indicator light flashes irregularly or its fuse blows (the light does not flash if its fuse is blown), the immobilizer system will function normally.

This indicator illuminates and shows which position the select lever or the gear is in.

Displays the set vehicle speed. 

This indicator changes from white to green when Adaptive Cruise Control or Conventional Cruise Control is activated.

While driving, this indicator appears and informs the driver about the upshift timing for fuel-efficient driving. The shift-up indicator can be activated or deactivated.

(Vehicles with an automatic transmission) 

Use snow mode for accelerating and driving on slippery road surfaces such as snow.

This indicator illuminates when the sonar audible alarm is turned OFF.

Use sport mode for sporty driving or when driving in mountainous regions with lots of curves.

If the warning light exhibits any of the following conditions, there may be a malfunction in the seatbelt pretensioners and/or SRS airbag system. Immediately take your vehicle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatbelt pretensioners and/or SRS airbag will not operate properly in the event of a collision, which may increase the risk of injury:

• Flashing or flickering of the warning light.
• No illumination of the warning light when the ignition switch is first turned to the “ON” position.
• Continuous illumination of the warning light.
• Illumination of the warning light while driving.

This indicator appears when the steering responsive fog lights system is deactivated. This indicator disappears when the system is activated.

This light illuminates when the Steering Responsive Headlight is turned off. Also, the light flashes when a malfunction occurs in the Steering Responsive Headlight.

The light flashes when a malfunction occurs in the Steering Responsive Headlight.

This warning indicator appears when the SUBARU Rear Vehicle Detection (SRVD) is malfunctioning. When this indicator appears, have your vehicle inspected by your SUBARU dealer as soon as possible.

The indicator appears when the SRVD OFF switch is pressed to deactivate theSUBARU Rear Vehicle Detection (SRVD). In this case “SRVD Off” will be shown on the multi-information display.

The overhead console includes the LED status lights that indicate the SUBARU STARLINK system status. Below is a description of the different statuses that the LED light(s) can indicate. 

Solid Green: System is normal. A subscription to the SUBARU STARLINK service has been established.* 

Solid Red: A system malfunction has occurred. 

Flashing Green or Red: SUBARU STARLINK service is currently communicating (e.g. Voice call, Stolen Vehicle Recovery, etc.). 

No Light: A subscription to the SUBARU STARLINK service has not been established. 

* This does not always reflect that the SUBARU STARLINK service is available.

This indicator illuminates when Remote Battery Charging Timer has been scheduled.

The light illuminates when the Vehicle Dynamics Control OFF switch is pressed briefly to select the traction mode.

These lights show the operation of the turn signal or lane change signal. 

If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible.

The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system. 

The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately:

• The light does not illuminate when the ignition switch is turned to the “ON” position.
• The light does not turn off even once several seconds have elapsed after the ignition switch has been turned to the “ON” position.

Vehicle Dynamics Control warning light 

The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system becomes unable to provide ABS control. As a result, the Vehicle Dynamics Control system also becomes inoperative, causing the warning light to illuminate. Though both the Vehicle Dynamics Control and ABS systems are inoperative in this case, the ordinary functions of the brake system are still available. You will be safe while driving with this condition, but drive carefully and have your vehicle checked at a SUBARU dealer as soon as possible. 

If the electrical circuit of the Vehicle Dynamics Control system itself malfunctions, the warning light only illuminates. At this time, the ABS (Anti-lock Brake System) remains fully operational. 

The warning light illuminates when the electronic control system of the ABS/Vehicle Dynamics Control system malfunctions. 

The Vehicle Dynamics Control system is probably inoperative under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately:

• The warning light illuminates while the vehicle is running. 

If the warning light behavior is as described in the following examples, the Vehicle Dynamics Control system may be considered normal:

• The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven.
• The warning light illuminates when the engine has stalled and continues to illuminate after the engine has been restarted. However, it will turn off once the vehicle starts moving. 

Vehicle Dynamics Control operation indicator light 

The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. 

The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather. This does not indicate the existence of a problem. The light should turn off as soon as the engine has warmed up. 

The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/malfunction indicator light is on. The Vehicle Dynamics Control system is probably malfunctioning under the following condition. Have your vehicle checked at a SUBARU dealer as soon as possible:

• The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started.

Your vehicle is equipped with two types of control modes to accommodate various driving preferences. The control modes can be selected with the “VSC SPORT” switch. Normal mode allows secure and smooth normal driving. When the switch is pressed, Vehicle stability control (VSC) SPORT mode is activated. Control characteristics such as the Vehicle stability control (VSC) and TRAC are adjusted to afford maneuverability closer to what a driver may have imagined, while a sense of security is retained. Vehicle stability control (VSC) SPORT mode/Normal mode The “VSC SPORT” indicator and Vehicle stability control (VSC) off indicator come on when in Vehicle stability control (VSC) SPORT mode.

The Windshield Washer Fluid Level light indicates the windshield washer fluid is low. This light illuminates when the fluid level in the windshield washer fluid tank decreases to the lower limit (approximately 1.1 US qt, 1.0 liter, 0.9 Imp qt). Your authorized Subaru retailer can assist with refilling during your next routine maintenance visit, or you may refill yourself with genuine Subaru windshield washer fluid after the vehicle is turned off – just look for the yellow cap under the hood! For a quick reference on adding windshield washer fluid, refer to your Owner's Manual.

This light illuminates while the X-mode is activated. It will turn off when the X-mode is deactivated.

When the brake pedal is depressed of the brake control function is activated, the brake lights on the vehicle indicator illuminate red.

Subaru Added Security ®

Get details on the best way to protect your Subaru.

Guaranteed Trade-In

A trade-in value guarantee for the first eight years of ownership.

Packed with Technology

EyeSight ® Driver Assist Technology

This advanced system provides extra awareness, safety, and added peace of mind every time you drive.

Explore Subaru

Our vehicles will inspire drivers like you to become a Subaru owner for life. Find out what makes us more than a car company.

Connect with Us

About Subaru

Other Subaru Sites

© Subaru of America, Inc. Use of this site signifies your acceptance of the Terms & Conditions .

• Privacy Policies
• California Privacy
• Cookie and Ad Preferences

* MSRP does not include destination and delivery charges, tax, title, and registration fees. Destination and delivery includes handling and inland freight fees and may vary in some states. Prices, specifications, options, features, and models subject to change without notice. Select colors may be subject to an additional charge. See your retailer for more information.

** EPA-estimated fuel economy. Actual mileage may vary. For Crosstrek Hybrid and Solterra, EPA-estimated MPG equivalent on a full battery charge. Actual mileage will vary.

*** Limited warranties are contingent on age and mileage. Whatever comes first concludes the warranty.

† Connected Services depend on factors outside Toyota's control, including an operative telematics device, a cellular connection, GPS signal and the availability of a compatible wireless network, without which system functionality and availability may be limited or precluded, including access to response center and emergency support. Service may vary by vehicle and region. Apps and services subject to change at any time without notice. Requires app download/registration and subscription after trial (if applicable). Terms of Use apply. Data usage and charges may apply. To learn about Toyota’s connected services data collection, use, sharing and retention practices, please visit  toyota.com/privacyvts

Safety Connect: Stolen vehicle police report required to use Stolen Vehicle Locator. Automatic Collision Notification activates only in limited circumstances.

Remote Connect: Use only if aware of circumstances surrounding vehicle and it is legal and safe to do so (e.g., do not remotely start engine if vehicle is in an enclosed space or vehicle is occupied by a child). Remote start/stop not available on manual transmission-equipped vehicles.

Drive Connect: Services not available in every city or roadway.

Service Connect: Information provided is based on the last time data was collected from the vehicle and is not real time data. Service Connect is not renewable as a stand-alone service and requires a subscription to any of Safety Connect, Remote Connect or Drive Connect upon trial expiration.

Wi-Fi Connect: Eligible vehicle and wireless service required. Wi-Fi Connect coverage and service not available everywhere. Valid in the contiguous U.S. and Alaska. Do not drive distracted. Go to att.com/solterra for terms and conditions. Up to 5 devices can be supported using in-vehicle connectivity. The Wi-Fi Connect trial begins at the time of enrollment activation and expires when 30 days or the earlier of 3GB of data is used or the 1-month period ends. Subscription required after trial. Integrated Streaming requires subscription for third-party provider services.

Subaru has the utmost respect for the environment and is a proud partner of Leave No Trace. Care was taken not to harm the environment when taking this photo.

The materials displayed on this website, including but not limited to all text, audio, video, images, photographs, illustrations, artwork, animation files and other graphics, names, logos, trademarks, and service marks, are property of Subaru or its parent or affiliated companies or its licensors and are protected by copyright, trademark, and other intellectual property laws. This site may be displayed, downloaded, and/or printed solely for your personal, non-commercial home use, provided that you do not delete or modify any copyright, trademark, or other proprietary notices. Any other use of the material on this site without the prior written consent of Subaru is strictly prohibited.

iPod and iPad are registered trademarks of Apple Inc.; Brembo is a registered trademark of Freni Brembo S.p.A.; Alcantara is a registered trademark of Alcantara S.p.A and Alcantara is produced by Toray Group.; Ultrasuede® is a registered trademark of Toray Industries, Inc.; TORSEN LSD® is a registered trademark of JTEKT TORSEN North America, Inc BBS is a registered trademark of BBS Kraftfahrzeugtechnik AG.; Bluetooth is a registered trademark of Bluetooth SIG, Inc.; HomeLink® and the HomeLink® house icon are registered trademarks of Gentex Corporation.; Tom Tom is a registered trademark of TomTom International BV; Aha and Harman Kardon are a registered trademarks of Harman International Industries, Inc.; Android is a trademark of Google Inc.; HD Radio is a registered trademark of iBiquity Digital Corporation.; SiriusXM and SiriusXM NavTraffic are registered trademarks of SiriusXM Satellite Radio, Inc.; iHeart is a registered trademark of Clear Channel.

PLEASE REVIEW THESE IMPORTANT DISCLOSURES.

Subaru of America, Inc. reserves the right to make changes at any time without notice or obligation to the information contained on this Internet site, prices, incentive programs, specifications, equipment, colors, materials, product illustrations and to change or discontinue models. All prices are based upon Manufacturer's Suggested Retail Prices ('MSRP') in U.S. dollars (unless otherwise indicated) and exclude taxes, title fees, licensing, options and destination charges unless specifically included. Retailers are independent businesses and are free to set their own retail prices. All information contained at this Internet site is intended for the USA market only.

** EPA-estimated fuel economy. Actual mileage may vary. For Crosstrek Hybrid and Solterra, EPA-estimated MPG equivalent on a full battery charge. Actual mileage will vary.

Check Engine Light is On: 2018 Subaru Crosstrek Premium 2.0L 4 Cyl.

Subaru crosstrek model years - 2018, 2019, 2020, 2021.

How to diagnose a check engine light with an obd scanner on a Subaru Crosstrek

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Want an easy way to save $500? Rotate your tires at least three times per year

Learn how to diagnose and fix minor oil leaks in your car

Where is the jack location, jack points and other tips on jacking up a vehicle

Your coolant should perform well under any condition - just like Aaron Rodgers!

• Lake Chevy helped make these videos
• Download Subaru owners manuals

A check engine light can indicate a broad spectrum of problems with your 2018 Subaru Crosstrek. If you have a flashing check engine light, turn off the engine immediately to prevent potential motor damage. Whereas a steady check engine light may mean you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light. The video above shows how to locate the on board diagnostics OBD plug location on your 2018 Crosstrek, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your Crosstrek.

Is it OK to drive with a check engine light on? Intermittent Check Engine Light: If the check engine light on your 2018 Crosstrek is not steady, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Crosstrek, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises. Flashing Check Engine Light: If your check engine light is flashing, stop driving your Crosstrek and have it towed to your nearest mechanic – a blinking check engine light means you probably have a very serious problem with your car and you risk ruining your engine by driving it. If you are unsure about what your diagnostic trouble codes mean after finding the Crosstrek OBD port location and scanning the codes; have your Crosstrek diagnosed by a professional automotive technician.

• Advance Auto coupon for 20% off entire order: KIOSK20

• Help On deadline and can't find what you're looking for? Contact: [email protected]
• Advertising
• Auto Show & Events
• Corporate News
• Engineering & Technology
• Environmental
• Motorsports
• About Subaru
• Corporate Information
• Executive Bios
• Consumer Website
• 2024 Subaru BRZ tS
• 2023 Subaru BRZ
• 2018 Subaru BRZ
• 2017 Subaru BRZ Series.Yellow
• 2017 BRZ Performance Package
• Crosstrek Hybrid
• Videos/B-Roll
• Press Contacts

SUBARU ANNOUNCES PRICING ON 2025 OUTBACK SUV AND LEGACY SEDAN

Power moonroof, driverfocus® distraction mitigation system, navigation, and a 360-degree heated steering wheel now standard on limited trims starting price of 2025 legacy is $24,895, same as outgoing 2024 model year starting price of 2025 outback is $28,895, same as outgoing 2024 model year award-winning eyesight® driver assist technology standard on all models.

• Investigation
• Contact us

What is OMSK [ edit | edit source ]

• OMSK is a retail application designed to be a restricted interface for Kiosk/Demo PS4 units found in game/electronic stores.
• Kiosk/Demo units do not use a separate/different SKU (like DevKits/TestKits), they instead use a normal retail PS4 coupled with a IDU (Individual Display Unit) disc used to automatically install OMSK and it's Daemon and a collection of demos, videos and descriptions.
• Demos use a non-console and non-account specific .rif and .idx licenses, meaning they can be installed and launched on any PS4 without a PSN connection.
• By using the base files found on IDU discs, users can install the Daemon and a fpkg placeholder, to install any retail pkg on any firmware, as long as the license is also present.

List of PS4 IDU discs [ edit | edit source ]

• PS4 IDU: 2014 Spring Refresh
• PS4 IDU: 2014 Summer Refresh GameStop (PS4 1.71, PSRN 2.04)
• PS4 IDU: 2014 Holiday Refresh BestBuy (PS4 1.76, OMSK 2.10.02) - bought damienfrost
• PS4 IDU: 2014 Holiday Refresh GameStop (PS4 1.76, OMSK 2.10.04) - bought damienfrost
• PS4 IDU: 2014 Spring Refresh GameStop (PS4 2.04, OMSK 2.30)
• PS4 IDU: 2015 Spring Refresh (PS4 2.04, OMSK 2.30)
• PS4 IDU: 2015 Summer Refresh Standard (PS4 2.55, OMSK 2.31)
• PS4 IDU: 2015 Summer Refresh GameStop Update Guitar Hero Live (PS4 2.57, OMSK 2.33)
• PS4 IDU: 2015 Holiday Refresh GameStop Version 2 (PS4 2.57, OMSK 2.33) - bought damienfrost
• PS4 IDU: 2015 Winter Refresh GameStop (PS4 2.03, OMSK 2.23) - bought damienfrost
• PS4 IDU: 2015 Winter Refresh GameStop Version 2 (PS4 2.57, OMSK 2.33) - bought damienfrost
• PS4 IDU: Disney Infinity 3.0 Edition Holiday 2015 Version 2 (PS4 2.57, OMSK 2.33)
• PS4 IDU: 2016 Spring Refresh GameStop (PS4 3.15, OMSK 3.00)
• PS4 IDU: 2016 Summer Refresh GameStop (PS4 3.55, OMSK 3.00)
• PS4 IDU: 2016 Winter Refresh GameStop (PS4 3.11, OMSK 3.00)
• PS4 IDU: 2016 Holiday Refresh GameStop (PS4 4.00, OMSK 4.00)
• PS4 IDU: 2016 Holiday Refresh LEGO Dimensions (PS4 4.00,OMSK 4.00)
• PS4 IDU: 2017 Spring Refresh GameStop (PS4 4.50, OMSK 4.10)
• PS4 IDU: 2017 Summer Refresh GameStop (PS4 4.72, OMSK 4.20)
• PS4 IDU: 2017 Summer Refresh Walmart (PS4 4.72, OMSK 4.20)
• PS4 IDU: 2017 Winter Refresh LEGO Dimensions (PS4 4.07, OMSK 4.00)
• PS4 IDU: 2017 Winter Refresh GameStop (PS4 4.07, OMSK 4.00)
• PS4 IDU: 2017 Holiday Refresh GameStop (PS4 4.74, OMSK 4.30) - bought damienfrost
• PS4 IDU: 2018 Spring Refresh GameStop (PS4 5.50, OMSK 4.40)
• PS4 IDU: 2018 Summer Refresh Standard (PS4 5.55, OMSK 4.40)
• PS4 IDU: 2018 Summer Refresh GameStop (PS4 5.55, OMSK 4.40)
• PS4 IDU: 2018 Winter Refresh GameStop (PS4 5.03, OMSK 4.30)
• PS4 IDU: 2018 Winter Refresh Walmart (PS4 5.03, OMSK 4.30)
• PS4 IDU: 2018 Holiday Refresh GameStop (FIRMWARE 6.02, OMSK 5.00)
• PS4 IDU: 2018 Holiday Refresh Walmart (FIRMWARE 6.02, OMSK 5.00)
• PS4 IDU: 2019 Spring Refresh GameStop (PS4 6.51, OMSK 5.00) - bought damienfrost
• PS4 IDU: 2019 Summer Refresh GameStop (PS4 6.72, OMSK 5.10)
• PS4 IDU: 2019 Winter Refresh GameStop (PS4 6.20, OMSK 5.00)
• PS4 IDU: 2019 Winter Refresh Walmart (PS4 6.20 OMSK 5.00)
• PS4 IDU: 2019 Holiday Refresh GameStop (6.72, OMSK 5.10)
• PS4 IDU: 2021 Winter Refresh (PS4 8.03, OMSK 5.20)

• Wikify needed
• Console Information

Navigation menu

• Bahasa Indonesia
• Slovenščina
• Science & Tech
• Russian Kitchen

Omsk: Garrison city on the Irtysh

All photos by William Brumfield

Omsk, currently a city of around 1 million, was founded in 1716 as a fort on the middle reaches of the Irtysh River.  During the 18th century, its primary purpose was to protect Russia's southern border and establish authority over the aboriginal steppe tribes.

Although administratively subordinate to Tobolsk  throughout the 18th century, Omsk gained increasing power in the 19th century.  From 1808 until 1917, Omsk served as the headquarters of all Siberian Cossack troops, and in 1822 a separate Omsk Province was formed. Shortly thereafter, construction began on the Cossack Church of St. Nicholas (1833-1840), based on a plan by the noted Russian architect Vasily Stasov.  The St. Nicholas Church, which has been splendidly restored, became the repository of one of the area's great relics, the banner of Yermak, cossack conqueror of Siberia

This strong military presence also connected Omsk with the notorious Siberian exile system.  The most famous of the fortress's exiles was the writer Fyodor Dostoevsky, condemned in 1849 for associating with the "radicals" in St. Petersburg.  In January 1850 Dostoevsky arrived under guard at the Omsk fort, and for the better part of three years (1850-54), he lived the harrowing existence of a convict sentenced to hard labor, which included unloading barges on the Irtysh River. When his health broke under the physical and psychological strain, Dostoevsky was hospitalized under the care of a sympathetic medic.  It was during his stay in the infirmary that Dostoevsky began the writing of one of his seminal works, “Notes from the House of the Dead.” A few buildings still survive from that time, including one of the fortress gates, a few warehouses, and the hospital.

During the latter part of the 19th century, Omsk began a period of heady expansion, as the town became a transportation center for Russia’s vast interior. Regular steamboat service along the Irtysh River to Tobolsk began in 1862, but it was the railroads that made Omsk a boomtown. In 1894-95 Omsk was linked by the Trans-Siberian Railroad to Chelyabinsk in the west and Novonikolaevsk (later Novosibirsk ) in the east. In 1913, another rail line was completed from Omsk to Tyumen  in what would become the new Siberian mainline. By the beginning of the 20th century, the population of Omsk had tripled, to over 60,000 inhabitants.

This development as a transportation nexus led to a surge in the city's commercial district.  What had formerly been a provincial garrison town consisting primarily of wooden structures punctuated with several large churches now became a preeminent site for banks, educational institutions, industry and retail trade in Siberia.  In addition to branch offices for major banks and firms in Moscow and St. Petersburg, Omsk received investment from companies in the United States, Germany, and Great Britain.  The central part of Omsk had structures whose design rivaled Moscow's business district. Many of the new commercial buildings were built in styles derived from the Florentine Renaissance.

During the First World War, strategically located Omsk grew still further, and by 1917 the city’s population reached 100,000. Following the October Revolution, Bolshevik power was proclaimed almost immediately; but with little local support, the Bolsheviks were driven from the city in June 1918. Opposition to the Bolsheviks was fatally divided, and in November 1918, a military coup installed a dictatorship headed by Admiral Alexander Kolchak (1874-1920), who was a renowned polar explorer and gifted naval commander, but incapable of dealing with the chaos of the Russian civil war. For almost a year, Omsk could be considered the “capital” of the White forces, and the mansion where Kolchak had his headquarters is a prominent landmark. In November 1919 Kolchak’s forces were driven from Omsk. In 1921 Omsk became one of the centers of the American Relief Agency during the terrible Volga area famine.

With its economy shattered and the countryside still in chaos, Omsk struggled through the 1920s, only to achieve some industrial growth in the 1930s. Like many Siberian cities, it expanded rapidly during the Second World War, both as an evacuation haven and as a center of transportation and production.  Major development of the city’s military-industrial complex continued after the war, and by the end of the 1970s, the city's population exceeded 1,000,000—a benchmark of major significance. Omsk also became a center of the oil and gas industry.

Despite the social dislocation and contradictions of post-Soviet Russia, contemporary Omsk remains an important economic and industrial center.  It has a strong university (opened in 1974) and one of the largest regional libraries in Siberia. The city's expansion has occurred along the Irtysh River, thus creating a stretched plan with large distances between the various districts. Construction began on a subway in 1996, but work has been delayed, and the first line is not scheduled for completion until 2017. Omsk also has an international airport near the city center. The building of a new airport at a safer distance outside the city is proceeding slowly.

Fortunately, the historic center is rebounding, with its early 20th-century commercial district of imposing offices and shops.  There is a lively club scene, as well as a number of large theaters.  Omsk also supports diverse religions.  In addition to reopened Orthodox churches, the city contains a synagogue, mosques (the administration of the Imam of Siberia is in Omsk), and a large Baptist church, to list only a few. The reconstruction of the city’s main Orthodox church, the Cathedral of the Dormition (built in the 1890s and demolished in 1935) was completed in 2007.

Omsk continues to face the challenges of uneven economic development. But with proper investment and management, this Siberian powerhouse is poised to combine new levels of prosperity with a thriving cultural and intellectual life.

All rights reserved by Rossiyskaya Gazeta.

to our newsletter!

Get the week's best stories straight to your inbox

This website uses cookies. Click here to find out more.