2013 dodge journey jump start

How to Jump Start a Dodge Journey: A Complete Guide to Reviving Your Car

There may come a time when your Dodge Journey experiences a dead battery and you need to jump start it. Knowing how to jump start your vehicle can save you time and money, and get you back on the road quickly. In this guide, we’ll walk you through the step-by-step process of jump-starting a Dodge Journey.

What You’ll Need:

• A set of jumper cables
• Another vehicle with a functioning battery
• Safety gloves and goggles (optional but recommended)

Step 1: Find a Good Samaritan

If your Dodge Journey’s battery has died, you’ll need another vehicle with a functioning battery to jump-start it. Ask a friend, family member, or a kind stranger nearby who is willing to help you out.

Step 2: Position the Vehicles

Park the vehicle with the functioning battery close to your Dodge Journey, allowing enough space between the hood of both vehicles to easily access the batteries. Both vehicles should be turned off, with their parking brakes engaged.

Step 3: Identify the Battery Terminals

Open the hood of both vehicles and locate the battery terminals. They should be labeled as positive (+) and negative (-). The positive terminal is usually red, while the negative terminal is often black.

Step 4: Connect the Jumper Cables

Now it’s time to connect the jumper cables:

Step 5: Start the Vehicles

Once the jumper cables are securely connected, start the vehicle with the functioning battery and let it run for a few minutes. This will allow the dead battery to gain some charge.

Step 6: Start the Dead Vehicle

Now, try starting your Dodge Journey. If the battery was the underlying issue, it should start up. If it doesn’t, double-check the connections and let the vehicles sit for a few more minutes before attempting again.

Step 7: Disconnect the Jumper Cables

Once your Dodge Journey is running, carefully disconnect the jumper cables in the reverse order of how they were connected:

• Disconnect the negative (-) cable from the engine block of your Dodge Journey.
• Disconnect the negative (-) cable from the good battery.
• Disconnect the positive (+) cable from the good battery.
• Disconnect the positive (+) cable from the dead battery (Dodge Journey).

Final Thoughts

Jump-starting a Dodge Journey is a simple process as long as you follow the proper steps and take necessary precautions. Remember to always wear safety gloves and goggles when working with batteries. If your Dodge Journey continues to experience battery issues, it’s recommended to have the battery and charging system checked by a qualified mechanic.

Hopefully, this guide has helped you become more confident in jump-starting your Dodge Journey in case of a dead battery. Stay safe on the road!

Frequently Asked Questions On How To Jump Start A Dodge Journey: A Complete Guide To Reviving Your Car

How do you jump start a dodge journey.

To jump start a Dodge Journey, you’ll need a set of jumper cables and another vehicle with a fully charged battery. Connect the positive terminals, negative terminals, then start the Dodge Journey’s engine.

Can I Use A Portable Jump Starter To Jump Start My Dodge Journey?

Yes, a portable jump starter is a great alternative to using another vehicle. Connect the jump starter to the Dodge Journey’s battery, then start the engine.

What Should I Do If My Dodge Journey Doesn’t Start After A Jump?

If your Dodge Journey doesn’t start after a jump, double-check the connections, let the battery charge for a few minutes, and try again. If it still doesn’t start, you may need to replace the battery.

How Often Should I Jump Start My Dodge Journey?

Ideally, you should only jump start your Dodge Journey when the battery is dead. However, if you frequently jump start it, it may be time to have the battery and electrical system checked by a professional.

Related posts:

• How to Reset Nissan Rogue Radio: Easy Guide for Reviving Your Sound System
• Can a Subaru Jump Start Another Car: The Complete Guide
• How to Easily Reset Dodge Journey Oil Change Light: Complete Guide
• How to Easily Program Key Fob for Push Start Dodge Journey: Step-by-Step Guide

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How to Jump a Dodge Journey

If your Dodge Journey’s battery is out of juice, a jump start may be the only way to get it up and running. However, if you’ve got no experience of jump-starting a car battery, you may not know how to start. This process isn’t too tricky, but needs to be carried out with care and precision to avoid any mistakes or risks. This guide will cover exactly how to jump a Dodge Journey, step by step. We’ll also cover what to do when your Journey is up and running again.

How to Jump Start a Journey: Step 1 – Preparation

First, before popping the hood or hooking up the cables, there are a few preparatory steps to follow. Prep really matters when it comes to jump-starting a Dodge Journey (or any other car) as it reduces the risk of any accidents or unwanted side effects from the process.

First, you’ll need to make sure you’ve got a good quality set of jumper cables to use. You’ll also need a secondary vehicle (a “donor” vehicle) with a fully-functional battery. Alternatively, you can use a portable battery booster to jump your Journey if another vehicle isn’t available. Safety gloves and glasses are also recommended.

Make sure the parking brake is engaged and shift your car into “Park,” with the ignition on “Lock.” Additionally, switch off all electrical systems, like the heater, the radio, and any in-car entertainment screens or GPS devices.

You’ll also want to make sure that, if you’re using a secondary vehicle to jump your Journey, it’s parked close by. Ideally, the two vehicles should be parked facing one another, so you can easily pop the hoods on both and connect the cables without running out of room.

Step 2. Pop the Hood

Find the hood release lever, which is typically below and to the left of the steering wheel, and pull it. Then step out of the vehicle, release the safety catch, and lift the hood. Use the hood prop to hold the hood in place while you work. Do the same for the secondary vehicle.

Step 3. Locate the Terminals

Next, you’ll want to locate the car battery and the positive (+) and negative (-) terminals, where you’ll be connecting the jumper cables. Make sure to put on your safety glasses and gloves before this stage, if you have them.

The positive terminal is red and marked by a + sign. Find it and remove its cover. If you have any trouble with this, look for the little locking tab. Push on that, then pull the cover upward, and it should come away freely.

You’ll also need a negative ground. For this, you can use any unpainted metal surface around the engine. Find a spot that is easy to access and keep it in mind when attaching the negative cables in the next step.

This is also a good time to inspect the batteries in both vehicles. Look for any signs of damage, such as cracks, acid leaks, corrosion, or even swelling of the battery itself. If the battery looks damaged or is leaking, it’s best to avoid attempting a jump start and call a mechanic instead.

Step 4. Connect the Cables

This is the most important step, and arguably the trickiest, too. You’ll need to hook up the jumper cables to the two car batteries, and there’s a very precise order to follow. If you do anything out of order or connect to the wrong locations, you could endanger yourself or damage the vehicles.

To begin, take the red (positive) jumper cable and connect one of the clamps to the positive terminal on the Dodge Journey. After that, connect the other end to the positive terminal on your secondary vehicle.

Take the black (negative) cable and connect one clamp to the negative terminal on the secondary vehicle, or your portable booster. Continue by attaching the other end to your negative ground (an unpainted metal section) on the Journey.

Step 5. Turn On the Secondary Vehicle

Turn on the engine of the secondary vehicle. Let it run for a few minutes to transfer energy from the donor battery to the dead Dodge Journey battery. You can also rev the engine in the secondary vehicle to help speed up the process.

After a few minutes, try starting the Dodge Journey. If it starts, disconnect the cables in the following order:

• The negative ground from the Dodge Journey.
• The negative cable from the donor vehicle.
• The positive clamp on the donor vehicle.
• The positive clamp from the Dodge Journey.

If the Dodge Journey still won’t turn over, leave it for another few minutes and try again. It may just need some more time. If it still won’t start, even after several attempts, there may be an underlying issue with either the battery or the alternator, and you might have to call a mechanic to fix it.

Step 6. Drive the Dodge Journey

Once your Dodge Journey fires up, it’s important to drive it around for a little while. This helps to recharge the battery. Aim to drive for at least 10 minutes, if not longer. The longer you can keep your car running, the more the battery will charge. Also, try to avoid using any electrical systems during this time, like the radio, as this will put extra stress on the battery and use power unnecessarily.

You may now want to visit a dealership or local garage to get your Dodge Journey looked at. Expert technicians can diagnose unexplained battery issues. However, you might already be able to figure out what went wrong on your own. For example, if you left the headlights on for a while, that’s most likely why the battery drained and needed to be jumped.

Why do you need a jump-start?

There are multiple potential reasons why a car might need a jump-start, including a dying battery, issues with the charging system, or a faulty alternator. In many cases, it’s because the car hasn’t been driven in a long time, causing the battery to gradually lose charge.

Jump Your Journey in a Few Easy Steps

As you can see, jumping a Dodge Journey is pretty similar to jumping any other car. It’s a relatively simple process, once you know how, but it still requires caution. Make sure to wear the proper safety equipment, take your time, and follow the correct clamping order to avoid any problems along the way.

Related posts:

No related posts.

Leave a Comment Cancel reply

Dodge Journey: JUMP-STARTING

If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.

NOTE: When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.

The battery in your vehicle is located between the left front headlight assembly and the left front wheel splash shield. To allow jump-starting there are remote battery posts located on the left side of the engine compartment.

2 — Remote Negative (-) Post.

3. Remove the protective cover over the remote positive (+) battery post. To remove the cover, press the locking tab and pull upward on the cover.

4. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF.

4. Connect the opposite end of the negative (-) jumper cable to the remote negative (-) post of the vehicle with the discharged battery.

If frequent jump-starting is required to start your vehicle you should have the battery and charging system inspected at your authorized dealer.

JACKING AND TIRE CHANGING

Freeing a stuck vehicle.

Description, Operation DESCRIPTION Fig. 1: Battery Components This vehicle is equipped with a single 12-volt battery. All of the components of the battery system are located in the front of the vehicle, just ahead of ...

Sensor, mass air flow (MAF) Removal Fig. 10: MASS AIR FLOW SENSOR 1. Disconnect air flow sensor electrical connector (4). 2. Remove constant tension clamps (1), (2) securing the air flow sensor (3). 3. Remove air flow ...

Fluid STANDARD PROCEDURE FLUID LEVEL CHECKING The fluid required for this transaxle is Mopar ATF+4 (Automatic Transmission Fluid). Use of improper or substitute fluids can cause shift problems and/or t ...

Dodge Journey Owners Manual

• Things to know before starting your vehicle
• Understanding the features of your vehicle
• Understanding your instrument panel
• Starting and operating
• What to do in emergencies
• Maintaining your vehicle
• Maintenance schedules
• If you need consumer assistance

Dodge Journey Service Manual

• Accessories and Equipment
• Differential and Driveline
• Heating & Air Conditioning
• Front Suspension
• Transmission

Home » Troubleshooting » Dodge Journey won’t start – causes and how to fix it

Dodge Journey won’t start – causes and how to fix it

Dodge Journey is a reliable road companion, but its a machine with hundreds of interconnected parts, and like any other machine it sometimes fail to deliver normal operation. In this article we go through most common causes of Journey breakdown and how you can fix the problem.

The most common causes that hinders normal starting operation of your Journey are dead 12v battery, corrosion on battery terminals, and dead key fob battery. However, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system can also cause your vehicle not to start.

1. Weak Battery

If your Journey’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery. A test can be done to measure the voltage between the battery poles, check the acid level and assess the condition of the starter battery.

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time.

Test 12v battery

The voltage of the battery on your Dodge Journey can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values ​​of approx. 12 to 13 volts. Values ​​above 14 or below 11.5 volts require an expert assessment of the condition of the car battery. Because the battery may have a defect with these measured values ​​and must be replaced.

Jump start Dodge Journey

If dead battery is the reason for the breakdown of your Journey, you can easily jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.

First connect red cable to the positive terminal of your Journey’s dead battery, then to the positive terminal of donor battery. Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your Journey. Start the donor vehicle and then your Journey. Remove the cables in reverse order.

2. Corrosion on battery

Corrosion on the contacts of your car battery leads to loss of contact and reduced current flow, which means that your engine can no longer start properly.

To know if your Journey’s starting problems are from dirty battery contacts, you need to investigate them. If you lift the rubber covers over the two battery terminals, you can check the terminals for corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it.

Clean battery corrosion

To clean the battery on your Dodge Journey, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers. We advise against using metal pliers, but if you use them, you must make sure that you do not touch any other parts of the body. Next you can unplug the red positive pole cable. Once the battery has been removed from the circuit, you can start cleaning the corroded battery. After cleaning, reconnect the terminals.

3. Weak key fob battery

If your Journey has push start/stop button, then its possible that your vehicle may not start due to weak key fob battery. Don’t worry, you can still start your vehicle – the battery is only used to send the signal for locking/unlocking. If the key fob battery is empty, the door no longer locks or unlocks at the push of a button. The doors must then be opened manually. The immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

How to start Dodge Journey with dead key fob battery

If you have a model of Journey which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

Tip: You can try starting your Journey with its second key. It will also rule out any other problem with the first key, for example, water damage.

4. Broken starter motor

A starter is a motor for starting the engine of your Journey. The average life of a starter motor is about 100,000 to 150,000 miles, and the life will be shortened if the engine is started more frequently. In any case, since the starter motor also has a limited life, it will break down after using the car for a long time, and if the starter motor breaks down, the engine will not start.

Symptom: When you turn the key to start the engine of your Journey, you will hear a clicking sound, which is the sound of a bad starter motor. And if the starter motor does not work with a healthy battery, suspect a malfunction of the starter.

If the starter fails, it usually needs to be replaced with a new one.

Temporary fix for starter

If the engine does not start due to the starter, the engine may start if you turn the key while hitting the starter motor with something like a stick or metal tool. This workaround is effective when the parts inside the starter are stuck together or the gears are slightly out of alignment.

However, it is possible that the starter is nearing the end of its life, so it is recommended that you have it inspected at a dealer or maintenance shop.

5. Defective alternator

An alternator is a generator that produces electricity. If your Journey’s alternator fails, it will not be able to produce electricity and the battery will not be able to charge. Therefore, even if you think that the cause of the engine not starting is a battery failure and replace the battery, the battery will soon run out and the engine will not start.

Alternators rarely break down. In particular, modern cars have improved performance, so it is said that they will last 200,000 to 300,000 miles. Still, it can break down depending on how you use it, and in the case of a used car, the alternator may be quite old. Don’t let your guard down.

If the alternator breaks down, it must be replaced with a new alternator.

6. Clogged fuel filter

The fuel filter of your Journey does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure. To a certain extent this doesn’t matter, but if the fuel filter is too dirty, the engine will no longer perform at full capacity and in some instance may not start at all. Cleaning is not possible, you can only change the filter.

7. Fuel pump failure

If your Journey’s fuel pump fails, then the engine won’t start. The pump normally ensures that the necessary amount of fuel is passed from the tank to the injection system of the engine with sufficient pressure.

Before your fuel pump stops working, it usually becomes noticeable: if your car’s engine breaks down from time to time, the car is difficult to start, the engine jerks a little or the engine performance drops, you should have your pump checked.

Wear or contamination of the pump can be the reason for this. If the pump is leaking, a power contact is broken, a line or a pump lever is broken, the fuel pump is usually also noticeable before failure. You can have a defective fuel pump replaced in your workshop.

8. Blown fuse

In rare cases, a blown fuse could also be the culprit in the breakdown of your Journey. Check all fuses in the fuse box essential for starting the engine. But, be careful when lending a hand yourself to the fuse box! The box is under power and repairs or tests should always be done in a workshop.

9. Defective spark plugs

Without functioning spark plugs, the engine will not start. The spark plugs themselves are often not affected by a defect. Instead, plug connections on the ignition system come loose. If only one plug is actually loose, you can fix the problem yourself on site. If a spark plug has failed, it must be replaced in the workshop.

10. Rodent damage

Rodent damage can be another reason why your Dodge Journey won’t start. The animals crawl under the vehicle and bite through cables and wires. In principle, this can affect all vehicle systems such as the fuel supply, the oil supply or the power supply.

The rodent damage can usually be seen quickly by looking into the engine compartment. The damage caused by the rodent bite can be repaired in the workshop. Be prepared for relatively high costs here.

11. Engine failure

Although very rare, but it can also be the cause of the breakdown of your Journey. If a vehicle has an engine failure, then nothing works anymore. It is not uncommon for the driver of a vehicle to be responsible for such damage. Typical causes include tearing of the timing belt, incorrect fueling, insufficient oil, hydrolock, overheating of the engine, or continuous driving in an excessive speed range.

Only an experienced mechanic can diagnose engine failure in a workshop.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the wire connected, you should turn the ignition on. But be careful not to start the engine. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be falsified. In addition to the vehicle manufacturer and model, you usually also have to type in the engine and vehicle ID number. For exact troubleshooting, always check whether the information is correct.

There are many reasons why your Journey may not start. When looking for the trigger, you should always start with the most obvious cause, the empty battery.

In any case, it is advisable for laypersons to call a breakdown service or a workshop. In the event of a defect, the latter can directly initiate the repair.

My Dodge Journey will not start after driving a short time, and then stopping about 20 minutes, then try to start, press lock unlock wait 10 minutes, car will then start every time.

This is a problem I am having with my Dodge Journey as well. I haven’t had this SUV 3 years and I am still paying on it.

My 2017 Dodge Journey ran fine in the morning yesterday, was totally dead last night – no locks, no dash lights, no power button. Long story short – disconnected + positive cable under hood to reset computer. Put cables back on after 10 min wait – got feeble spark while attaching wires. Entered car, found 4-way flashers indicating on dash. Button was accidentally depressed after morning drive. Charged battery for 1 hour with battery charger. Started fine, but needed to be driven extensively to fully charge 69-month old battery. Buying new battery tomorrow.

My dodge journey 2014 is not starting. It was stripped for overheating but now after the reassemble it’s not starting, VIN initialising and press clutch to start engine are showing on the clock

• How double locking system works in Toyota Fortuner
• Ford Puma steering wheel vibration causes and diagnosis
• Chevy TrailBlazer won’t start – causes and how to fix it
• Chevy Impala AC smells bad – causes and diagnosis
• VW Crafter burning smell causes and how to fix it
• Chevy HHR bad alternator symptoms, how to check voltage
• Mitsubishi Pajero Sport makes grinding noise when starting – common causes
• Acura ILX Bluetooth not working – causes and how to fix it
• Toyota Aygo AC not working – causes and how to fix it
• Ford Fusion AC blower motor not working – causes and diagnosis
• Mazda6 bad wheel bearings symptoms, causes and diagnosis
• Saab 9-7X AC smells bad – causes and diagnosis
• Ford F-350 Super Duty dashboard lights flicker and won’t start – causes and how to fix it
• Skoda Rapid pulls to the right when driving
• Mercedes-Benz E-Class makes grinding noise when starting – common causes
• Ferrari GTC4Lusso key fob won’t lock or unlock the doors
• Citroen C5 Aircross slow acceleration causes and how to fix it
• Porsche 911 bad ignition coils symptoms, causes, and diagnosis
• Mercedes-Benz GLE makes grinding noise when starting – common causes
• Bentley Bentayga bad mass air flow sensor (MAF) symptoms and causes

• Dodge Manuals
• journey 2013
• User manual

Dodge journey 2013 User Manual

• Owner's manual (622 pages)
• Owner's manual (630 pages)
• page of 108 Go / 108

Table of Contents

Introduction/welcome.

• Welcome from Chrysler Group Llc

Controls at a Glance

• Driver Cockpit
• Instrument Cluster

Getting Started

• Remote Start
• Keyless Enter-N-Go
• Theft Alarm
• Supplemental Restraint System (Srs) - Air Bags
• Child Restraints
• Front Seats
• Heated Seats
• Heated Steering Wheel
• Tilt/Telescoping Steering Column

Operating Your Vehicle

• Engine Break-In Recommendations
• Turn Signal/Wiper/Washer/High Beam Lever
• Headlight Switch
• Electronic Speed Control
• Climate Control
• Parkview® Rear Back-Up Camera
• Power Sunroof
• Wind Buffeting

Electronics

• Your Vehicle's Sound System
• Identifying Your Radio
• Uconnect Touch™ 4.3 & 4.3S at a GLANCE
• Uconnect Touch™ 8.4 & 8.4N at a GLANCE
• Siriusxm™ SATELLITE RADIO
• Ipod®/CD/Aux CONTROLS
• Garmin® Navigation (8.4N Only)
• Siriusxm™ TRAVEL LINK (8.4N ONLY)
• PLAYING Ipod/Usb/Mp3 DEVICES
• Uconnect™ Phone (Bluetooth® HANDS FREE CALLING)
• Uconnect™ Voice Command
• Video Entertainment System (Ves)
• Electronic Vehicle Information
• Enter (Evic)
• Programmable Features
• UNIVERSAL GARAGE DOOR OPENER (Homelink®)
• Programming a Rolling Code
• Power Inverter
• Power Outlets
• Trailer Towing Weights (Maximum Trailer Weight Ratings)
• Recreational Towing (Behind Motorhome, Etc.)

What to Do in Emergencies

• Roadside Assistance
• Instrument Cluster Warning Lights
• If Your Engine Overheats
• Jacking and Tire Changing
• Vehicles Without Wheel Covers
• Jump-Starting
• Shift Lever Override
• Towing a Disabled Vehicle
• Freeing a Stuck Vehicle
• Event Data Recorder (Edr)

Maintaining Your Vehicle

• Opening the Hood
• Engine Compartment
• Fluids and Capacities
• Maintenance Schedule
• Maintenance Record
• Tire Pressures
• Wheel and Wheel Trim Care
• Exterior Bulbs

Consumer Assistance

• Chrysler Group Llc Customer Center
• Chrysler Canada Inc. Customer Center
• Assistance for the Hearing Impaired
• Publications Ordering
• Reporting Safety Defects in the 50 United States and Washington, D.C
• Mopar Accessories
• Authentic Accessories by Mopar
• FAQ (How To?)
• Frequently Asked Questions
• Driving and Alcohol

Advertisement

Quick Links

• 1 Uconnect™ Phone (Bluetooth® Hands Free Calling)
• 2 Fluids and Capacities
• Download this manual

Related Manuals for Dodge journey 2013

Summary of Contents for Dodge journey 2013

• Page 1 journey User GUide...
• Page 2 if you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/Media Center Manuals or Warranty Booklet by calling 1-800-423-6343 (U.s.) or 1-800-387-1143 (Canada) or by contacting your dealer. important This User Guide is intended to familiarize you with the important features of your vehicle.

Page 3: Table Of Contents

Page 4: introduction/welcome.

• Page 5 If your symptoms persist, please see an authorized dealer. CHRYSLER, DODGE, JEEP, RAM TRUCK, ATF+4, MOPAR and Uconnect are registered trade- marks of Chrysler Group LLC. COPYRIGHT ©2012 CHRYSLER GROUP LLC...

Page 6: Controls At A Glance

• Page 7 CONTROLS AT A GLANCE...

Page 8: Instrument Cluster

• Page 9 CONTROLS AT A GLANCE Indicators - Turn Signal Indicators - High Beam Indicator - Front Fog Light Indicator - Vehicle Security Indicator* - Electronic Stability Control (ESC) Off Indicator - Electronic Speed Control ON Indicator - Electronic Speed Control SET Indicator * If equipped ** Bulb Check with Key On...

Page 10: Getting Started

Page 11: keyless enter-n-go.

• Page 12 GETTING STARTED • If “Unlock All Doors 1st Press” is programmed all doors and liftgate will unlock when you press the liftgate button. If “Unlock Driver Door 1st Press” is programmed only the liftgate will unlock when you press the liftgate button. To select between “Unlock Driver Door 1st Press”...
• Page 13 GETTING STARTED NOTE: In case the ignition switch does not change with the push of a button, the RKE transmitter (Key Fob) may have a low or dead battery. In this situation a back up method can be used to operate the ignition switch.

Page 14: Theft Alarm

Page 15: supplemental restraint system (srs) - air bags, page 16: child restraints.

• Page 17 GETTING STARTED Installing The LATCH - Compatible Child Restraint System • Your vehicle’s second row passenger seats are equipped with the child restraint anchor- age system called LATCH, which stands for Lower Anchors and Tether for CHildren. • All three second-row passenger seating positions have lower anchors that are capable of accommodating LATCH-compatible child seats.
• Page 18 GETTING STARTED Installing The Child Restraint Using The Vehicle Seat Belts • To install a child restraint, first, pull enough of the seat belt webbing from the retractor to route it through the belt path of the child restraint and slide the latch plate into the buckle.

Page 19: Front Seats

• Page 20 GETTING STARTED Fold-Flat Front Passenger Seat • The front passenger seat can be folded flat to allow for extended cargo space. Pull up on the recliner lever to fold down the seatback. Flip 'n Stow™ Front Passenger Seat Storage • The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback.

Page 21: Rear Seats

• Page 22 GETTING STARTED Stadium Tip ’n Slide™ (Easy Entry/Exit Seat) — Seven Passenger Models To Move The Second-Row Passenger Seat Forward NOTE: Raise the 20% seatback/armrest before moving the 60% seat to allow for full seat travel. • To allow passengers to easily enter or exit the third-row passenger seats move the Tip ’n Slide™...

Page 23: Heated Seats

Page 24: heated steering wheel, page 25: tilt/telescoping steering column, page 26: operating your vehicle, page 27: turn signal/wiper/washer/high beam lever, page 28: headlight switch, page 29: electronic speed control, page 30: climate control.

• Page 31 OPERATING YOUR VEHICLE Climate Control Knobs • For your convenience the climate controls can be operated by using the soft-keys located on the touch screen or the climate control knobs below the Uconnect Touch™ display. Automatic Operation • Press the AUTO button or AUTO soft-key. •...

Page 32: Parkview® Rear Back-Up Camera

Page 33: wind buffeting, page 34: electronics.

• Page 35 ELECTRONICS...

Page 36: Identifying Your Radio

Page 37: uconnect touch™ 4.3 & 4.3s at a glance, page 38: uconnect touch™ 8.4 & 8.4n at a glance.

• Page 39 ELECTRONICS Setting the Time • Model 8.4N synchronizes time automatically via GPS, so should not require any time adjustment. If you do need to set the time manually, follow the instructions below for Model 8.4. • For Model 8.4, turn the unit on, then touch the time display at the top of the screen. Touch Yes.

Page 40: Radio

Page 41: siriusxm™ satellite radio.

• Page 42 ELECTRONICS Selecting SiriusXM™ Satellite Channels Seek Up/Seek Down • Touch the Seek arrow soft-keys for less than two seconds to seek through channels in SAT mode. • Touch and hold either arrow soft-key for more than two seconds to bypass channels without stopping.
• Page 43 ELECTRONICS Browse • Lets you browse the SiriusXM™ Satellite Radio channel listing, Favorites, Genres, Game Zone, and Weather channels. Jump setting, and also provides the SiriusXM™ Satellite Radio channel list. Browse contains many sub-menus. Browse Sub-Menu Description Sub-Menu Shows the channel listing. Genre Provides a list of all genres, and lets you jump to a channel within the selected genre.

Page 44: Ipod®/Cd/Aux Controls

• Page 45 ELECTRONICS Models 8.4 & 8.4N • The iPod®/USB, CD, Audio Jack, SD Card or Bluetooth® source is accessed by touching the Player soft-key to enter the Player main screen, then touch the source soft-key and choose between Disc, Aux, iPod®, Bluetooth or SD Card. NOTE: Uconnect Touch™...

Page 46: Garmin® Navigation (8.4N Only)

• Page 47 ELECTRONICS • Dead Reckoning technology uses the speed sensors attached to your vehicle’s drivetrain and a gyroscope to supplement the existing GPS data. The combined data provides accurate positioning for your vehicle in tunnels, indoor parking garages, urban canyons, and any other area where GPS signals can become obstructed. Finding Points of Interest •...
• Page 48 ELECTRONICS Following Your Route • Your route is marked with a magenta line on the map. If you depart from the original route, your route is recalculated. A speed limit icon could appear as you travel on major roadways. • Lane Assist helps you decide which lane to be in at upcoming junctions. •...

Page 49: Siriusxm™ Travel Link (8.4N Only)

Page 50: playing ipod/usb/mp3 devices, page 51: uconnect™ phone (bluetooth® hands free calling).

• Page 52 ELECTRONICS NOTE: The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth® Hands-Free Profile, Version 1.0 or higher. For Uconnect™ customer support, call 1–877–855–8400 or for additional information on how to pair your phone, visit www.UconnectPhone.com Pairing a Phone •...
• Page 53 ELECTRONICS Start pairing procedure on mobile phone • Search for available devices on your Bluetooth® enabled mobile phone. This is usually within Settings or Options under “Bluetooth”. See your mobile phone’s manual for details. • When your phone finds the system, select “Uconnect” as the paired device. Complete the pairing procedure •...
• Page 54 ELECTRONICS Phone Menu Screen – Models 4.3 & 4.3S Phone Menu Screen – Models 8.4 & 8.4N...
• Page 55 ELECTRONICS Making A Phone Call • Press the Uconnect™ Phone button • (After the BEEP), say “dial” then the number (or “call” then the name as listed in your phone; see Phonebook). NOTE: You can also initiate a call by using the touch-screen on the Phone main screen. Receiving A Call –...
• Page 56 ELECTRONICS Voice Command Tips • Use longer names that are less easily mistaken for others. For examples, say “Call John Doe” instead of “Call John”. • You can “chain” commands together for faster results. Say “Call John Doe, mobile”, for example.

Page 57: Uconnect™ Voice Command

• Page 58 ELECTRONICS NOTE: • For the shortened SiriusXM™ Satellite Radio mode commands to be recognized you must be in that mode. For example, if you are in SiriusXM™ Satellite Radio mode you can say “39”, but if you are not in SiriusXM™ mode, you would need to say “Tune to Satellite Channel 39.”...

Page 59: Video Entertainment System (Ves)

Page 60: electronic vehicle information.

• Page 61 ELECTRONICS Uconnect Touch™ 4.3 Customer Programmable Features • The Uconnect Touch™ 4.3 system allows you to access Customer Programmable feature settings such as Display, Clock, Safety/Assistance, Lights, Doors & Locks, Heated Seats, Engine Off Operation, Compass Settings, Audio, Phone/ Bluetooth and SIRIUS Setup through hard-keys and soft-keys.

Page 62: Universal Garage Door Opener (Homelink®)

• Page 63 ELECTRONICS • At the garage door opener motor (in the garage), locate the “LEARN” or “TRAINING” button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor. Firmly press and release the “LEARN” or “TRAINING” button. NOTE: You have 30 seconds in which to initiate the next step after the LEARN button has been pressed.

Page 64: Power Inverter

Page 65: power outlets, page 66: utility, page 67: what to do in emergencies.

• Page 68 WHAT TO DO IN EMERGENCIES • Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated.
• Page 69 WHAT TO DO IN EMERGENCIES BRAKE - Brake Warning Light • The Brake Warning light illuminates when there is either a system malfunction or the parking brake is applied. If the light is on and the parking brake is not applied, it indicates a possible brake hydraulic malfunction, brake booster problem or an Anti-Lock Brake System problem.
• Page 70 WHAT TO DO IN EMERGENCIES - Anti-Lock Brake (ABS) Light • This light monitors the Anti-Lock Brake System (ABS). • If the light is not on during starting, stays on, or turns on while driving, we recommend you drive to the nearest service center and have the vehicle serviced immediately. - Electronic Throttle Control (ETC) Light •...

Page 71: If Your Engine Overheats

Page 72: jacking and tire changing.

• Page 73 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked.
• Page 74 WHAT TO DO IN EMERGENCIES 3. Pull the spare tire out from underneath the vehicle and raise it upright so the tire's tread is on the ground. 4. Tilt the retainer at the end of the winch cable and remove it from the center of the wheel. Spare Tire Stowage NOTE: Refer to “Spare Tire Removal”...
• Page 75 WHAT TO DO IN EMERGENCIES Jacking Instructions 1. Remove the spare tire, jack, and jack- handle from stowage. 2. Loosen, but do not remove, the wheel nuts on the wheel with the flat tire. Turn the wheel nuts counterclockwise one turn while the wheel is still on the ground.
• Page 76 WHAT TO DO IN EMERGENCIES 3. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange. 4. Raise the vehicle by turning the jack screw clockwise with the jack handle.
• Page 77 WHAT TO DO IN EMERGENCIES 11. Place the deflated (flat) tire in the cargo area. Do not stow the deflated tire in the spare tire stowage location. Have the deflated (flat) tire repaired or replaced as soon as possible. 12. To stow the winch cable and retainer, fit the assembled jack-handle over the winch drive nut.

Page 78: Vehicles Without Wheel Covers

• Page 79 WHAT TO DO IN EMERGENCIES WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.

Page 80: Jump-Starting

• Page 81 WHAT TO DO IN EMERGENCIES 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery. Once the engine is started, remove the jumper cables in the reverse sequence: 6.

Page 82: Shift Lever Override

Page 83: towing a disabled vehicle, page 84: freeing a stuck vehicle, page 85: event data recorder (edr), page 86: maintaining your vehicle, page 87: engine compartment.

• Page 88 MAINTAINING YOUR VEHICLE...

Page 89: Fluids And Capacities

Page 90: maintenance schedule.

• Page 91 MAINTAINING YOUR VEHICLE Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If a scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Information Center (EVIC)/Oil Change Required”...
• Page 92 MAINTAINING YOUR VEHICLE...
• Page 93 MAINTAINING YOUR VEHICLE...

Page 94: Maintenance Record

Page 95: fuses.

• Page 96 MAINTAINING YOUR VEHICLE Underhood Fuses • The power distribution center is located in the engine compartment. Cavity Cartridge Fuse Mini-Fuse Description Interior Power Distribution F101 60 Amp Yellow Center Rail Interior Power Distribution F102 60 Amp Yellow Center Rail Interior Power Distribution F103 60 Amp Yellow Center Rail...
• Page 97 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description F164 25 Amp Natural Powertrain Auto Shutdown F165 20 Amp Yellow Powertrain Shutdown F166 20 Amp Yellow Spare F167 30 Amp Green Powertrain Shutdown F168 10 Amp Red Air Conditioner Clutch Emissions – Partial Zero Emissions F169 40 Amp Green Vehicle Motor...

Page 98: Tire Pressures

Page 99: wheel and wheel trim care, page 100: consumer assistance, page 101: reporting safety defects in the 50 united states and washington, d.c, page 102: mopar accessories, page 103: index.

• Page 104 INDEX Inverter, Power ....62 Preparation for Jacking ..70 iPod®/USB/MP3 Control ..48 Programmable Electronic Features .
• Page 105 INDEX Towing ....64 Video Entertainment System™ Disabled Vehicle ...81 (Rear Seat Video System) ..57 Recreational .

Page 106: Faq (How To?)

Page 107: driving and alcohol.

• Page 108 DownloaD a free Vehicle information app by visiting your application store, Keyword (dodge), or scanning the Microsoft Tag. To put Microsoft Tags to work for you, use your mobile phone’s browser or App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi.

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

Dodge Journey Dash Light Flicker and No Start: How to Fix

Dash lights flickering and failure to start is a very common issue that can happen to the Dodge Journey. While your first impulse may be to think that there is something wrong with your vehicle’s starter (and it is possible), it’s usually caused by an issue with the battery or battery connections.

Does This Article Describe Your Journey’s Situation?

When the key is turned, and the starter is engaged, the vehicle will shut down power to any system that can go without power for a few seconds, which helps funnel all available electricity to the starter motor.

If you’re hearing this sound while the dash lights flicker, it’s almost certainly a battery issue:

If your Journey makes a single clunking noise when you turn the key, and the dash lights go out but don’t flicker, this article can still help you. But you can’t rule out the starter in that scenario. You’d want to check the battery over first before moving on to the starter.

This article is written assuming that your Journey won’t start and you don’t have much in the way of tools with you. So we’ll give you the easiest things to check first and move down the line in terms of difficulty.

1. Loose Battery Terminal (Likely)

A loose battery terminal can cause your Dodge Journey to have flickering dash lights and a no start condition. If a terminal is loose, the electrical connection to the vehicle is bad, and the dash lights can flicker without it starting.

It’s easy to tell if the battery terminals aren’t tight. Wiggle them back and forth. If either one moves, it’ll need to be snugged to get your vehicle moving again.

If either terminal is loose, tightening it should get your dash lights to stop flashing and get your vehicle to start.

If you are stranded with your Journey without the ability to tighten the terminal where you are, push the terminal down and turn it with your hand a bit. That can give it enough bite to get your vehicle started until you can get home and tighten it.

2. Corroded Battery Terminal (Likely)

When messing with a battery, always disconnect the negative terminal first . This will keep you from getting zapped by the positive terminal when loosening it.

Your Journey needs a solid connection to the battery at the positive and negative posts. Without a good connection, it can cause the flashing dash light symptom/no start that you are experiencing.

If your vehicle’s battery posts look like the one above, you’re going to need to clean them up. A good wire brush will get the job done.

How to Clean Your Journey’s Corroded Battery Post

Here’s how to clean a battery post/terminal in the Dodge Journey:

• Disconnect the negative battery terminal from the post. Make sure to tuck the negative cable away so it won’t touch its post again. This will help ensure that you don’t get accidentally shocked.
• Disconnect the positive battery terminal from the post.
• Using a wire brush or a dedicated battery post cleaning brush, clean the corrosion off of the battery posts.
• Clean the battery terminals. You can use a dedicated battery terminal cleaner. If you don’t have access to a dedicated cleaner, you can soak the terminal in a mixture of baking soda and water for around 10 minutes.

3. Bad Battery (Most Common Cause)

A bad (or drained) battery is the most common reason why your Dodge Journey has flickering dash lights but won’t start.

If you find that the battery was too low to start your vehicle, that doesn’t necessarily mean the battery is bad. It could have a slow drain , or the alternator could be bad.

Here are a few ways you can test the battery:

How to Jump Start the Dodge Journey

If you are stranded away from home, you can see if jump-starting your vehicle will get it to start. If it jumps, you’ll know that a drained battery was causing the no-start/flickering dash lights issue.

Here’s how to jump your Journey:

• Connect to the positive terminals first : Connect the red jumper cable to your Journey’s positive battery terminal, then connect the other end of the red jumper cable to the running vehicle’s positive battery terminal.
• Connect to the negative terminals : Connect the black jumper cable to your Journey’s ground terminal. Then connect the other ground wire to a good ground source on the running vehicle. There’ll usually be a spot pretty close to the battery that’s labeled ground. Any engine or accessory bolt that’s clean will usually work fine. The ground on the running vehicle’s battery will technically do the job too, but there’s a small chance that hooking up this way can start a fire at the battery, so don’t do it.
• Do nothing : Let the battery charge for a few minutes.
• Start the vehicle : If it seems like it’s acting differently (flashing less or trying to start), adjust the jumper cable contacts and let it charge some more.
• Remove the jumper cables : Reverse the process.

If the battery or alternator light comes on after the vehicle starts, you’ll likely need a new alternator. Driving with either light on will eventually cause the battery to drain again and leave you stranded.

Test the Battery Yourself

You can test your Journey’s battery with a multimeter. Here’s how to go about doing so:

• Set the multimeter to volts.
• Touch the red prong to the positive battery post.
• Touch the negative battery post

At this point, you’ll see a battery voltage level. Without the vehicle running, the voltage level should be around 12.5 or so. Anything below that might not be enough for it to start.

As a rule of thumb, anything under 12 is likely a bad battery. A bad alternator can cause a good battery to drain.

Let the Parts Store Test Your Journey’s Battery

Most local parks stores, such as AutoZone, Napa, Advanced Auto Parts, etc., will be happy to check your Journey’s battery to see if it’s bad. It’s a big win for them because you can buy a new battery there if it is bad.

Depending on the equipment used, the process can take up to a half hour. So keep that in mind.

(Less Likely) Causes of Dash Lights Flickering + No Start in the Dodge Journey

Here are things known to cause this scenario but aren’t as common.

Bad Ground Wire

Above, we discussed that a bad ground connection at the battery could cause the lights to flicker and a no-start condition. But, a damaged or loose ground connection can cause the problem anywhere on the cable.

Inspect your Journey’s ground cable for any obvious damage. Then, follow it to its mounting location on the engine block or chassis. Make sure that it is snugged tightly and there’s no rust underneath it.

Bad Starter Connection

The battery cable that runs from your Journey’s battery terminal to the starter can be loose at the starter. This is usually only seen after somebody has replaced the starter and didn’t tighten it enough.

The starter battery cable can also get heat damage from the exhaust if it’s run the wrong way.

FREE SHIPPING on most orders of $35+ & FREE PICKUP IN STORE

2013 Dodge Journey

2013 Dodge Journey - Battery Jump Starters

• Battery Tender
• Schumacher Electric
• Super Start

Amperage (A)

• 2, 6, 40 Amp

Voltage (V)

• 12, 24 Volt

Peak Amperage (A)

• 3000, 1500 Amp
• 3400, 1700 Amp
• User Determined

Battery Type

• Capacitor, Lithium Ion
• Lead Acid, AGM, Lithium, GEL
• Lithium Ion
• Lithium Polymer
• No Internal battery

DC Port Included

Light included, super start jump starter, schumacher electric jump starter, schumacher electric 2000 peak amp lithium jump starter, schumacher electric ultracapacitor hybrid jump starter, schumacher electric battery charger.

How to Jumpstart a 2010 Dodge Journey SXT 3.5L V6

Dodge journey model years - 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019.

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Access Battery - Learn where the battery is located

4. Jump Points - Locate the positive terminal and the ground

5. Jump Procedure - Correctly hook up the jumper cables and jump

6. After the Jump - Tips to follow after jumping the dead battery

7. Troubleshoot - If the jump didn't work, try these adjustments

8. More Info. - Additional thoughts on jumping a dead battery

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

• Lake Chevy helped make these videos
• Download Dodge owners manuals

This video shows you how to use jumper cables to jump start a dead battery in your 2010 Dodge Journey. If you get into your Journey, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Journey.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Journey regularly and simply forgot to turn your lights off.

• Advance Auto coupon for 20% off entire order: KIOSK20

Low coolant levels is all to common - top yours up today

Dirty cabin air filter cause undue wear on your car's heater and AC and can cause bad odors

Don't be caught in the fog with burnt out fog light bulbs

Is the clock in your car ahead or behind? Learn how to set it here!

2018 Primetime Emmy & James Beard Award Winner

R&K Insider

Join our newsletter to get exclusives on where our correspondents travel, what they eat, where they stay. Free to sign up.

A History of Moscow in 13 Dishes

Featured city guides.

Try changing your search query or try one of the suggestions below!

War in ukraine, free and up-to-date :), transportation to and from moscow sheremetyevo airport, what is the distance from moscow sheremetyevo airport to the centre of moscow.

The distance to the centre of Moscow (Saint Basil’s Cathedral / Red Square) is 34 kilometres from South Terminal Complex and 42 kilometres from North Terminal Complex. Thus, terminals A and B are further away from the city. Travel time between the airport and the city centre is 1 hour and 5 minutes. Unfortunately, it can be busy on the roads and you should take into account a car journey that takes longer.

From SVO Airport to Moscow City centre by Taxi

City centre

Public transport

Train aeroexpress to moscow – buy tickets.

The fastest travel option between Moscow Sheremetyevo Airport and the centre of Moscow is the train Aeroexpress. You can get stuck in a traffic jam if you travel by car, taxi or bus, that won’t happen if you take the train. The Aeroexpress commutes between Belorussky Station in the city and the railway station at the airport, located on the south side of the airport at Terminal E. An automated people mover (APM) runs between this station and terminals A and B. The Aeroexpress departs every 30 minutes, travel time is 35 minutes.

From metro station Belorusskaya at Belorussky Station, you can travel by metro to the city centre and other parts of Moscow. The journey time from metro station Belorusskaya to metro station Teatralnaya close to Red Square is only 5 minutes.

Aeroexpress tickets The prices are listed below, an Aeroexpress ticket including a ride with the metro, tram or (trolley) bus costs 560 RUB, the price for a subway ticket is 55 RUB. You can buy tickets for the Aeroexpress at the stations, but it is cheaper to do this online. Please consult website and timetable Aeroexpress for more information.

SAVING TIPS: Tickets can be bought at the airport, but online it is easier and cheaper (450 RUB one way, 900 RUB return). A group ticket can be used by four people and costs 1,100 RUB for a single journey and 1,800 RUB for a return (valid for 30 days). The price is the same online and from the ticket machine. Aeroexpress trains run without stopping, besides you can use free WiFi aboard since early 2015.

Top 5 sights in Moscow

1. Red Square – free! 2. Moscow Kremlin 3. Saint Basil’s Cathedral 4. Moscow Metro Tour of 1.5 hours 5. Communist Walking Tour of 2 hours

Bus and metro to Moscow

It is more economical to travel by bus and metro to the centre of Moscow. Needless to say, taking a direct train is easier and faster. With bus 817 and bus 948 you can get in 35 minutes to metro station Planernaya (northernmost station metro line 7). With bus 851 and bus 949 it takes 25 minutes to metro station Rechnoy Vokzal (northernmost station metro line 2). The price of a bus ticket is 57 RUB or 80 RUB.

From both stations you can take the metro to the centre of Moscow, station Kuznetskiy Most for metro line 7 (travel time: 31 minutes) and station Teatralnaya for metro line 2 (travel time: 23 minutes). Metro station Kuznetskiy Most is a short distance from the world-famous Bolshoi Theatre. The total journey time is at least one hour. If the bus ends up in a traffic jam, the journey can take a lot longer.

Tickets for the subway priced 55 RUB are available from the ticket vending machines. You can also buy a day ticket (yediniy) for public transport in Moscow for 200 RUB, it is valid for 24 hours. During the night you can travel by bus H1 between the airport and the city every half hour. Please consult buses to and from Moscow Sheremetyevo Airport and  website Moscow Metro for more information.

“The metro stations with the most central location in Moscow are Okhotny Ryad (M1), Teatralnaya (M2) and Revolution Square (M3), at a short distance from Red Square, Kremlin and GUM.”

Discover and book tickets, activities and tours:

Prague: the best of mozart with opera and ballet.

Enjoy an evening in lavish style listening to a Concertino Prague Orchestra in the historical Smetana Hall. Relax as you listen to music by Mozart and marvel at the talented musicians and dancers.

Sydney: Kandinsky Exhibition at the Art Gallery of NSW

Experience a showcase of the life and work of Kandinsky, one of the most influential and best-loved European modernists at the must-see Art Gallery of New South Wales.

Yerevan: Self-Guided Tour for your Audio Device with Map

Explore the city of Yerevan on a self-guided audio tour. Dive into sights like the Sculpture Park, Republic Square, and the Cascade staircase with facinating audio commentary.

Belgrade 20th century tour

Get to know history and architecture of turbulent period in Serbian development. The most important sights and attractions from the last century.

Budapest: Private Communism Walking Tour with Museum Entry

Learn about everyday life in Budapest during the days of communism, when people drove Trabant cars and drank spirits at work. Hear about the black market and the infamous queues to buy bananas, and visit sites where revolutionary action took place.

Evening Walking Yerevan City Tour with 3 Brandy & Gata

3 types of Armenian brandy and sweet pastry Gata you need to taste in Yerevan. Welcome to our city of sun! The largest and capital city of the Republic of Armenia is Yerevan-the city older than Rome.

Tours and transport

Behind the iron curtain of tallinn - secrets of the soviets.

Get to know the Soviet history of Tallin. Visit an abandoned Soviet air defense base and find out about the former border-zone areas in Tallinn.

Riga Highlights bike tour

Explore Riga's top sights on this guided bicycle tour. Get out of the Old Town and experience beautiful parks, the Jewish Ghetto, the fascinating Moscow suburb, and see the Art Nouveau district.

Warsaw: Private 3-Hour Tour by Car with Hotel Pickup

Discover the past and present of Warsaw on a private 3-hour tour. Learn more about the history of the city and its dynamic development. See the Royal Route, Łazienki Park, and palace complex.

★★★☆☆   2 reviews

Have you visited Moscow Sheremetyevo Airport lately? So far, 2 airport passengers have written an airport review about Moscow Sheremetyevo Airport. This airport has an average score of 3 out of 5. Provide other airport travellers with essential airport information and tell us about your airport experience.

Write a review