safari safe keeps beeping

Top 4 Reasons Your Gun Safe Is Beeping (How to solve them)

If you are reading this article, you are likely running into a beeping sound from your gun safe! In this article, we will go through all the reasons your safe may be beeping so you can quickly resolve it.

Beeping from your gun safe can result from many different factors. However, the most common are:

Dead batteries.
Incorrect codes being entered.
A time delay is activated.
Tamper alert is activated.

So, with that said, let’s get into each reason and get you helped out!

Jump to your concern:

1. beeps every once in a while when you are not using it.

This is the most common reason someone might need clarification about why their safe is beeping at them. If you find that your safe beeps occasionally, it likely is because your 9V battery is starting to die, and it is letting you know that you need to replace it.

To replace the battery (in most gun safes), you have to push upwards on the base of your electronic keypad, and it will pop off. This will reveal the 9V battery behind the keypad, where you will replace the battery, very much like a smoke detector in your home.

So, how often should you change your batteries? I recommend changing your batteries every time you change the batteries in your smoke detectors every 6 to 12 months or so. If you let your safe get to the point that it has to beep at you, you are waiting too long.

Remember, if you use your safe a lot, or hardly at all, it will change how often your battery will last.

Please note: Your electronic lock can detach from the safe, which may be a surprise. However, all the locking mechanism portions of the lock are on the safe’s interior. They are away from anyone that may want to break into your safe.

2. Beeps when you press electronic lock buttons

Almost every electronic lock will beep from the factory when you press buttons. This is generally to let you know that you have successfully pressed a button, and it was registered.

This lets you catch if you did something incorrectly before continuing with your code sequence. You can turn this beeping off, but we’ll talk about that later in the article!

3. Beeps after inputting the code, but the safe won’t open.

If your safe beeps several times after you attempt to put in your electronic lock code, and the safe won’t open. This generally means that you are either using an incorrect code or accidentally pressing the wrong buttons during the sequence.

I recommend trying your input more carefully to see if you are pressing the wrong buttons or if you should think about if you have recently changed your code.

I do recommend writing down the code that you use for your gun safe; however, never keep it close to the safe, and never label the code as your “gun safe code,” so it will be more difficult for someone to know what they are looking at if your code is discovered.

If you input your code incorrectly too many times in a row, you may go into a lock-out mode (aka time delay). This will lock you out of the safe for a specific time (generally 20 minutes). This will be evident by angry beeping after inputting your code and the safe not opening.

4. Your safe is beeping after you move it.

This is a good thing! Many newer, smart pistol safes offer tamper alerts. This means that if a child picks it up or a thief tries to take it away, it sounds an alarm with a beeping sound. Some, safes like Vaultek’s safes (which can be found on my favorite gun safes article) , will even notify your phone to let you know it is being tampered with.

Can you turn off the beeping on a gun safe?

While you can’t turn off some beeping functions on most safes, you can turn off the beeping sound when you actively press buttons on the safe.

This differs widely depending on the safe and the brand you purchased . Most safes will show you step-by-step how to do this in the user manual, or you can always call the manufacturer.

Generally speaking, you turn off the beeping by inputting a specific code sequence into the pad, which will disable the beeping.

So why would you want to turn off the beeping? While the beeping is helpful to let you know a successful input, it is also a sound that might alert anyone in the home of your presence that you may not want. This is up to you and the purpose of your safe. If it is for self-defense storage, you should disable it. If it is strictly for storage, then the beeping is quite helpful.

What should I do if I can’t stop the beeping?

So you read this article thoroughly, tried different things, and still can’t get your safe to stop beeping? That is where a locksmith is going to come into play. Locksmiths will work directly with the manufacturer of your gun safe to troubleshoot the issue on your safe. They will help by repairing any problems that have arisen and more.

If the safe is too damaged, it is possible they may have to drill and repair your safe to get it opened. Only certified locksmiths will be able to do this, though, as not just anyone can gain access to the information needed to do this effectively.

Beeping sounds from your gun safe are generally nothing to worry about and can be a helpful indicator that you need to change your batteries or that you might be pressing the wrong buttons during your input sequence. In some cases, you can disable the beeping by following a specific code input.

Ultimate Guide to Gun Safe Inner Steel Liners (Upsides & Downsides)

Everything To Know About Purchasing The Right Size Safe For You

How to Stop a Safe from Beeping

There’s nothing more annoying than a beeping sound that just won’t stop – and that’s especially true if it’s coming from your home security safe. Most folks assume that a beeping safe means there’s a problem with the actual safe, but the truth is that there are several reasons why your safe may be beeping at you.

Luckily, stopping that beeping sound doesn’t have to involve hours of troubleshooting or calling in a locksmith. In fact, there are a few simple things you can try to do right now to get rid of that beep once and for all. Keep reading to learn more about how to stop a safe from beeping!

Can You Stop a Safe from Beeping?

Are you tired of constantly being interrupted by the persistent beeping of your safe? Many people do not realize that a beeping safe is not the norm and can actually be a sign of a problem. Some possible causes include low batteries, a locked bolt, or a malfunctioning safe. While attempting to stop the beeping yourself might seem like a good idea, it is important to proceed with caution.

Without proper knowledge and experience, you could potentially damage the safe, rendering it useless or compromising its security. It is best to consult a professional to diagnose and fix the issue properly. Don’t let the beeping drive you crazy – take action and get the help you need to solve the problem.

Why Should You Stop a Safe from Beeping?

Have you ever been jolted awake at 3 am by the piercing sound of a beeping safe? Or perhaps you’ve been in a meeting, trying to stay focused , only to be interrupted by the incessant noise of a safe trying to tell you its batteries are low. Whatever the case may be, it’s clear that the beeping of a safe is disruptive and annoying.

But beyond just being an inconvenience, it’s important to stop a safe from beeping for practical reasons as well. If a safe’s batteries die completely, you may be unable to access its contents when needed. So, save yourself from the headache and potential loss by taking care of that beeping safe.

How to Stop a Safe from Beeping – 7 Simple Things to Consider

1. the first thing you should do is check for low batteries..

In most cases, a beeping safe is simply indicating that it’s running low on power. You can usually find the battery compartment on the inside of the safe door . Replace the batteries with fresh ones to see if that stops the beeping.

2. Make Sure You’re Entering the Correct Code.

You could be entering an incorrect code, and the safe is beeping to let you know it’s not a valid sequence. Double-check the code you’ve entered against the one provided in your manual, or if necessary, contact the manufacturer for help.

3. Check the Locking Mechanism.

If the beeping persists, it could be that something is wrong with the safe’s locking mechanism. Inspect the lock and its components to see if there are any signs of damage or malfunctioning parts.

4. Consult Your User Manual for Troubleshooting Tips.

Your user manual should provide some helpful troubleshooting tips and tricks to help you resolve the issue. If you don’t have a copy of your manual, the manufacturer should be able to provide one for you.

5. Check for Mechanical Malfunctions.

Sometimes, a safe’s internal mechanical components can malfunction and cause it to start beeping. If this is the case, it’s best to consult a professional locksmith for assistance.

6. Make Sure It’s Not an Automatic Time Lock Feature.

Many safes are equipped with automatic time-lock features that can cause them to start beeping after a certain period of inactivity. Check your user manual to see if this is an available feature, and adjust the timer appropriately.

7. Consider Replacing the Safe If All Else Fails.

If none of these troubleshooting steps have worked, your safe will likely have a more serious issue and need to be replaced. It’s important to make sure you invest in a reliable safe with good reviews so you don’t run into this issue again.

That’s it! You’ve now learned how to stop a safe from beeping by following these seven simple steps. Make sure you keep your manual handy for future reference and don’t forget to replace the batteries regularly. Good luck!

5 Considerations Things When You Need to Stop a Safe from Beeping

1. check the batteries.

The first thing you should do when your safe starts beeping is to check the batteries. Most safes use AA or AAA batteries; if these batteries are low, the safe will start beeping. You can usually find the batteries in a compartment on the back or bottom of the safe.

2. Check for A Power Outage

If the batteries are not the problem, then you should check for a power outage. If there is a power outage, the safe may think that it has been breached and start beeping. You can usually check for a power outage by looking at the display on the front of the safe.

3. Check for Low Battery Warnings

If you see a low battery warning on the display, then you should replace the batteries as soon as possible. Low battery warnings usually appear when the batteries are getting low and need to be replaced.

4. Check for Error Codes

If you see an error code on the display, it means that there is a problem with the safe. The error code will tell you the problem so you can fix it.

5. Call Customer Service

If you cannot figure out why your safe is beeping, then you should call customer service. Customer service can help you troubleshoot the problem and get your safe working again. They may also be able to advise you on keeping you safe from beeping in the future.

By following these five considerations, you can stop your safe from beeping and have peace of mind that it is secure.

5 Benefits of Stop a Safe from Beeping

1. you can get a good night’s sleep.

If you have a safe that beeps every time you open it, chances are you’re not getting a good night’s sleep. The beeping can be annoying and disruptive, preventing you from getting the rest you need.

2. The Beeping Won’t wake you Up

In addition to preventing you from getting a good night’s sleep, the beeping can also wake you up if you’re trying to take a nap or sleep in on the weekends. If you have a safe that beeps, you won’t be able to enjoy your downtime as much as you’d like.

3. You Won’t Have to Listen to the Beeping All Day

If you work from home, the last thing you want is to have to listen to a beeping safe all day long. The beeping can be distracting and make it difficult to concentrate on your work.

4. You Can Avoid Distractions When You’re Driving

If you have a safe that beeps when you open it, it can also be distracting when you’re driving. You may wonder why the safe is beeping or if something is wrong with it. This can lead to accidents or near-misses.

5. You Won’t Have to Worry About the Battery Dying

If your safe has a battery backup, you won’t have to worry about the battery dying and the safe beeping until someone comes to change it. This can be especially helpful if you’re away from home for an extended period of time.

Some Common Mistakes People Make When Trying to Stop a Safe from Beeping

Trying to stop a safe from beeping can be challenging; unfortunately, many people make common mistakes that only worsen the situation. One of the most common mistakes is failing to read the instructions carefully. It’s essential to understand how the safe works to avoid further complications. Another mistake is trying to force the safe open or using too much pressure.

This can damage the safe and make it even harder to fix. People also sometimes forget that the power of the safe need to operate, so checking the batteries or power source is crucial. Overall, stopping a safe from beeping requires patience and careful planning to avoid any damage to the safe or frustration.

A beeping safe is an annoyance that nobody wants to deal with, but with these quick tips, you should be able to get rid of that noise quickly and easily. Remember to check your batteries, consult your owner’s manual, and use your reset button as needed – and if all else fails, don’t hesitate to call in a pro.

By taking a few minutes to troubleshoot your beeping safe, you can have peace of mind knowing that your valuables are secure and that an annoying sound in the middle of the night won’t wake you up. Thanks for reading our post about how to stop a safe from beeping.

Locked Out: Troubleshooting Your Cannon Gun Safe [September 2023 Guide]

Facing issues with your Cannon Gun Safe? Don’t worry; I’ve got you covered in this straightforward troubleshooting guide for September 2023.

Whether it’s a locked safe, battery troubles, door alignment, keypad glitches, or security alarm hiccups, I’ll walk you through the steps to resolve them. Your peace of mind is my priority. Let’s dive into practical solutions to ensure your Cannon Gun Safe operates smoothly and securely.

What is a Cannon Gun Safe?

A Cannon gun safe is a gun safe manufactured by the Cannon brand. It is best for:

First-time gun safe owners : Cannon gun safes are user-friendly despite technological advancement. They also offer a series with traditional locking bolts.
Gun collectors : Cannon gun safes can house many guns depending on the gun safe type.
Hunters : Hunters are among those who own many guns, and they are the ones who open their gun safes. Electric locks may not be the best choice for hunters, as batteries can drain easily. The group fits Cannon gun safes with traditional locking bolts.
Gun owners with family : Cannon pledges ultimate security for life to its customers, making it suitable for gun owners living with family, especially those with children and teens. Cannon has a wide range of gun safe sizes, which can accommodate more guns for family members in the industry. Cannon’s motto is “ Nothing Protects Like Cannon .”

Why Choose Cannon Gun Safe?

Cannon gun safe is known for its reliable features and terms benefiting gun owners:

1. Secure storage: Cannon gun safes are strongly built with a minimum of 1″ steel composite door. All have the recommended 12-gauge steel body linings. Cannon gun safes are tested to protect themselves from fire damage for at least 30 minutes at 1200 degrees Fahrenheit. Cannon also has waterproof gun safes.

2. Manufacturing: Cannon gun safe designs are well-thought and people-friendly. They have adjustable shelves for different gun sizes or your other valuable’s layout needs.

3. Biometric Lock: Gun safes vary in locking mechanisms . Cannon adapts to technological advancements, and they offer safes with electronic locks.

4. Warranty: If your gun safe has gone through attempted theft, flood, or fire damage, Cannon warrants a free service to repair its parts, labor, and shipment. They even have a one-year paint warranty.

5 Common Reasons for a Locked Out Safe

Cannon Gun safe may protect your guns at their very height. That is why it is hard to recover re-entry in cases of forgotten passwords for electronic locks or problems with physical locking bolts.

Here are the five common reasons for a locked-out safe:

1. Malfunctioning Lock

Chances are your gun safe has a jammed lever. Some Cannon Safes are not equipped with a key backup for added protection.

2. Electronic Keypad Issues

You may have tried keying your lock combination. Your input may be wrong, or the wheels behind the lock are not aligned.

3. Door Hinge Problems

Have you observed a dragging sound when you open your gun safe? It might become worse if you ignore it.

Your Cannon gun safe may have worn-out door hinge pins. Or some guns or accessories may have leaned on the door and are putting pressure on it.

4. Battery Failure

There are a few possibilities that could be causing the issue. It’s possible that your battery has already run out of charge or you replaced it with an expired one. Additionally, you may have been using a battery that isn’t recommended for your device.

5. Deactivated Code

You may have entered the wrong key code several times. The Cannon gun safe’s lock-out mode lasts for about five minutes.

5 Tips for Troubleshooting a Cannon Gun Safe

Some models have backup keys, but others don’t. Here are five tips for troubleshooting a Cannon gun safe:

1. Check the Battery

The battery compartment is a part of the keypad, which is outside of the safe. You can check the battery and replace it even if it dies.

Pull the battery plug-in, disconnect it, and then connect the new battery.

Cannon recommends bi-annual changing of batteries. They also suggest using a 100% alkaline, no lithium, Duracell, or Energizer battery with a longer life span.

If you worry about your combination, it is stored through the locking mechanism’s memory, thus remaining the same.

2. Test the Lock Mechanism

Try to manage and turn the handle to the right. Keep your hand that way as you enter the code, and then turn the handle to the left. If it beeps twice, your safe door should open.

If the gun-safe handle spins and is not latching, tighten the screw on the handle’s pivot using a 5mm Allen Wrench.

If it still fails, remove the screws to remove the whole handle and reinstall it. Ensure you have put them back in correctly, in the same spots you removed each part.

If you open the gun safe, keep it open and test the locking mechanism twice before closing it.

3. Inspect the Door Hinge

Check for door gaps and dangling door rubbers.

If your gun safe has served you for long years, its door hinges are likely not responding to the original grease anymore.

The best way to deal with this problem is to call Cannon customer service. Refrain from drilling through your safe to have these fixed all by yourself.

When this gets fixed properly, make sure to also clear your safe’s door from any pressure brought by leaning guns and accessories inside.

4. Reset the Electronic Keypad

You must have your user manual specific for your Cannon gun safe type. Skim for steps to reset a combination.

Refrain from pushing buttons while the battery connects, or the timer will reset, wait for five minutes.

Cannon is not responsible for lost codes. It has a 30-day warranty for combinations, though. Try contacting them for possible help.

5. Use an Override Key

Some Cannon gun safe has an override key. This may look friendly for anticipated electronic lock failures but lessens the unit’s security .

For mindful keeping of gun-safe keys, there are 10 best places to hide your key .

The keyhole is located behind the gun safe’s keypad. If your unit has an override key, skim through the user manual for the proper steps to successfully open the safe.

Cannon’s warranty is limited. It does not cover lost or forgotten key passes, improper opening procedures, and failed batteries.

This is a reminder to prevent you and your frustration from drilling into the safe.

Check your Cannon gun safe warranty details, coverage, terms, and dates, to help you manage your expectations. Then, call their customer service to affirm coverage and to ask for advice.

It is also recommended to record a video displaying your concern and observations. Make close-up recordings of the parts of your gun safe.

Doing that will help Cannon assess your problem and provide you with remote aid.

Being locked out of a gun safe is common to gun owners. But with proper information, you can solve it without bringing your gun safe into a worse state.

Why is my Cannon safe not opening?

Malfunctioning locks, electronic keypad issues, door hinge problems, battery failure, and deactivated code are five common reasons a safe fails to open.

What do you do when an electronic safe doesn’t open?

Check for possible problems. Check your gun safe batteries, test its lock mechanism, inspect the door hinges, reset the electronic keypad, or use an override key.

Why is my safe beeping and not opening?

Chances are the wheels behind the locking mechanism are not aligned.

How long does Cannon safe lock-out mode?

Cannon gun safe lock-out mode lasts for five minutes.

Woods, Matt. “Locked out of Your Safe? 3 Things Not to Do!” Www.acmelock.com , www.acmelock.com/blog/locked-out-of-your-safe-3-things-not-to-do .

“About Cannon Safes.” Www.gunsafes.com , www.gunsafes.com/About-Cannon-Safes.html .

Hey, I'm Larry B. Smith, the guy behind Rainier Ballistics. From a lifelong love of firearms, I've become a recognized authority in the field. As the main contributor, I share insights for all shooters, connecting technical know-how with the everyday experiences of gun enthusiasts. Let's explore the world of firearms together!

Problem with a "Cannon Safari" safe

lock has failed

By Marshal Fire, SASS 10064 July 25, 2016 in SASS Wire

Start new topic

Link to comment

Share on other sites.

I have a Cannon safe with a dial combo. I've always ben a little leery of the electronic locks.

Tennessee Trapper Tom

I also have a Cannon safe with electronic locks. Found out the hard way that Durecel batteries tend to corrod the wires. Switched to everready. Even though it solved my problem, the damage is done and I have to now change batteries every two weeks. Samething happened to my thermostat for the house. Durecell corroded the wires. Cost me $165 to replace. It came with durecel, switched immediately to everready

Double Barrel, SASS 34765

Have you gotten your safe open yet?

Springfield Slim SASS #24733

My brother had the same problem, and couldn't find the override key. I have dials on my safes, they always work and never go dead. What is the advantage of an electronic lock anyway, faster access? I'm not in that much of a hurry.

Czexican Dave

My first gun safe was a Liberty Fat Boy with an electronic lock. Went to retrieve guns for a CAS monthly match, but it would not open. Tried a new and a different brand of battery, but no luck. Called Liberty and they said to call a specific independent lock/safesmith in my general area, and don't worry, they would pay for his services. Took him about 2 1/2 hours to drill and open the safe. I inquired, and he said his bill private pay would have been about $400. He also said electronic locks fail on an average of 5 years, and warranty work on them helped keep him in business. He also said a dial lock might last 100 years. Part of his business is replacing new mechanical dial locks at customer request with more modern electronic locks, so he had a few with him and he installed one of those. That gun safe takes me less than one minute extra to open, and has been operating flawlessly since. My second Liberty Fat Boy has an electronic lock, simply because I haven't called him to take off the electronic and install a dial lock. Based on my experience, Liberty does seem to have a good warranty. I also have a 100 year old floor safe that belonged to my wife's grandfather. That dial lock still works fine. When I finish my walk in vault, it's going to have a dial lock. Your mileage may vary.

I was having problems with digital cameras.

The battery was always dead.

So one day I stopped and bought a battery tester.

It isn't much advantage to replace a battery with a half charge battery.

They all look the same.

I have found batteries corroded IN THE WRAPPER.

Duracell DID replace my lectrical earmuffs.

GET A TESTER.

I learned my lesson about electronic locks on a cheap Stack-on safe. That electronic lock was terrible, it was actually quicker to just always use the override key. My current safe is a BF Amsec with a group II combination lock.

Coyote Kincaid

I have three Cannon safes. First one is a dial and when you bring it back to 0 you have to hit it to get everything to fall into place. Second one is digital and haven't had a lick of problems. My third one is digital and it kept draining the battery and locking me out after only owning it for a week. Like you, I couldn't get my ammo out for a match the next day. Sent an email to the President of Cannon and I got a phone call within an hour from a service rep. Got my safe open and sent me a new lock. Haven't had any problems since and that was last year I believe.

Maddog McCoy SASS #5672

My Cannon I bought last year has been doing strange things recently. I was sitting in my Man-Cave and I heard it unlock itself with nobody around. The last couple of times I tried to open it, had to enter the code 4 or 5 times and it seemed it I entered it fast, it would work but not if I entered it slow. I guess I had best call them before I get locked out.

Maddog McCoy

Sedalia Dave

Big Box Residential security containers cut expenses by using cheap parts The lock is one of the easiest places to cut corners that is hard for the purchaser to notice.

If it has an electronic lock that is not at least UL group II certified it is not worth having. Even then the rating only covers its resistance to compromise not reliability. IMHO when it comes to electronic locks you are operating on borrowed time.

I still don't understand the purpose of a combination lock that can be bypassed with a key.

Mechanical locks should have the same UL Group II rating at a minimum. S&G dial locks have an excellent reputation. Look at your lock and google the manufacturer. If they are less than 100% reputable have it replaced ASAP while it still works.

Dial locks can outlast you but they need a little TLC to do so. So avoid rapidly spinning the dial. This places excessive strain on the mechanics of the lock and can lead to premature failure. The dial should always be turned in a slow and deliberate manner.

This topic is now archived and is closed to further replies.

Existing user? Sign In
Online Users
Leaderboard
All Activity
Create New...

Important Information

By using this site, you agree to our Terms of Use .

Uh oh! The 800 numbers are down. Please reach us at 859-887-9119 until the problem is resolved. Thanks!

Technicians

LockNet History
Miller Family History
Mission and Vision
Customer Testimonials
Architecture
Human Resources
Office Royalty
Architectural Door and Hardware
Electromechanical Solutions
Available Products
Managed Key Systems
Sur-Lock Exit Device
Project Management
LockNet Tech App Download
Technician Login
Technician Sign-Up
Troubleshooting Resources
Technician Testimonials
Why LockNet
Job Listings

My Safe Won’t Open: Five Things to Try

One of the most common troubleshooting calls we receive is:

“My safe won’t open. What do I do?”

Here are five common reasons why your safe won’t open, and what steps you should try before you call a technician.

Five Possible Reasons Your Safe Won’t Open

Dead batteries.

Fingers crossed, the reason your safe won’t open is as simple as dead batteries.

Before you try anything, change the batteries using brand name batteries. Off brand batteries lose power much faster than their brand-name counterparts.

It is important to try this step first, even if your keypad beeps and lights up as normal. There may be enough power in the batteries to operate the keypad, but not enough to completely retract the boltwork .

Jammed Bolt Work

At times, the bolt work can get jammed for a wide variety of reasons. If you hear the motor trying to retract the bolt work, but the safe won’t open, a jam could be the culprit.

It’s time to unleash your inner-frustrations; you get to mule kick the safe. Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work.

Next, pull the handle in the opposite direction than you normally do and enter the code. This will release some of the extra pressure on the bolt and should help the handle move more freely.

Lockout Mode or Time Delay

Many safes go into penalty lockout mode if too many wrong codes are entered. Depending on the type of keypad, it typically emits a rapid series of beeps. If this happens, wait 10 to 20 minutes, and try again.

Your safe also may have a time delay . If this is the case, you will need to wait for the specified time delay period (typically 10 minutes) and re-enter your code.

Deactivated Code

Another possible reason your safe won’t open is your code has been deactivated. Have someone else try their code to see if theirs works.

Disconnected and/or Damaged Wiring

As with any electronic device, wiring can get disconnected and/or damaged. Remove the keypad and inspect the wires to see if they have come loose, are kinked, or cut.

If everything is intact, disconnect the wire from the keypad, and remove the batteries. Wait at least 20 seconds, then reinstall the batteries and reconnect the wiring.

If wiring is damaged or cut, you will need to call a technician. Be sure to tell them the type of keypad you have installed so they can bring one when they come.

If you try all of these steps and your safe still won’t open, it’s time to call a technician. If you have any questions, let us know . We’re happy to help!

45 thoughts on “ My Safe Won’t Open: Five Things to Try ”

Hi there, I’m having a problem opening my safe with a LA Gard keypad. Ever since I bought it, it has its moments that it don’t want to cooperate for a day or two..but now it just won’t open.please help as I have money,things for a case in court that is coming up and without them things I dont have a case. What am I doing wrong?(323)253-8045 willie

Hi, Willie. Your best bet is to go to http://www.findalocksmith.com or http://www.savta.org to find a reputable locksmith/safe technician to help you. They’ll charge you and you will have to provide proof of residence for where the safe is located, but they’ll be able to help get the safe open.

I have a lagard lock on me gun safe. I changed my code. Worked fine for a day. My code consisted with of the 1 thru 6. Next day I put in the code and didn’t hear any beep as I pushed the numbers. If I push 7 thru 9 I hear a beep. Need your help please. Thanks

hi bobby i have the same thing all i do is discontect the battery push the key pads and then connect the battery again and at works but i am get fed up with doing that

Where is the battery located?

Please help just bought a safe ( RedHead ) I have the comb but cannot get it to open

Steve, If it has a mechanical lock (No buttons or keypad but has a mechanical 100 number dial) on it turn the dial five complete rotations in either direction. Next, turn the dial counterclockwise (left) three revolutions and stop with the first number comes to the index mark on the fourth rotation. Turn the dial clockwise (right) passing the second number twice and stop when it comes to the index mark on the third revolution. Turn the dial counterclockwise (left) passing the third number once and stop when it comes to the index mark on the second revolution. Now turn the dial clockwise (right) and the dial should come to a dead stop. you should then be able to turn the handle of your safe and open your door.

You may need to do these steps a few times before you get it. Make sure that each time you align the number with the index mark (at 12 o’clock on the dial ring) that you do it precisely, so you are dialing the number exactly.

For example if your safe combination was 25, 45, 65, you would need to dial these exactly. If you dial 23, 42, 63, it will likely not open as the internal components are not aligned properly.

If you have an electronic lock, try replacing the battery with a brand new Duracell battery and try again.

You may need to contact the manufacturer if these procedures don’t get you your desired results.

Thank you for your comment.

Hi, I have a dominator ground safe operated with a key which I have not opened in over one year. Now I kneed access to important documents and the key won’t turn the lock. Please advise.

I suggest contacting the manufacturer of your safe to see if there is a manufacturer approved troubleshooting document available or if your safe is still under warranty. It may be that there is debris in your lock and could be as simple as vacuuming the keyway out to clean out debris. If there is a lock failure, you will need to locate a reputable safe technician in your area. Safe technicians can be found searched for at http://www.savta.org , http://www.findalocksmith.com , or http://www.clearstar.com

All the best to you.

I own a protector gun safe and the batteries are to low to open the door. I tried my key and it will not turn and I broke the key tab off. I can remove the broken piece. What do I do now?

Richard, I suggest contacting a local reputable safe technician in your area to help you with your problem. You can do so by checking http://www.findalocksmith.com or http://www.savta.org and using their search tools, should be able to find someone near you able to help.

Hi, I need to change the batteries of our safe, but I cannot remove them by opening the keypad. Seems they need to be replaced from inside the door.It is a Fier Fyter from Costco. Should I call a technician or is there an easier solution? Thanks for your help! Elsa

Elsa, I would suggest contacting COSTCO and see if there is a warranty or if they have the contact information for the manufacturer. You may also want to go to http://www.findalocksmith.com or http://www.savta.org and using their search tools, should be able to find someone near you able to help.

We have a 2007 redhead cabinet with combination but lost the combination and cannot open the cabinetc. How can we reset this before calling a locksmith?

Melissa, I would suggest contacting the company you bought it from. “Redhead” has been used by a couple of manufacturers as names for certain lines of safes. The company you purchased it from should be able to help you locate a number to contact the manufacturer. If this doesn’t work, I suggest going to http://www.findalocksmith.com or http://www.savta.org to locate a reputable safe technician in your area to remedy your safe issue.

We have a 2007 redhead cabinet with combination but lost the combination and cannot open the cabinet.How can we reset this before calling a locksmith?

How do u reserved the combination on a 2007 redhead gun cabinet

Very good. After an evening of total grrrr frustration, I came across this site on google. You saved the day. The 24/7 phone number on the safe was useless as I called a few times with no answer (musta been on a p@#$ break). Anyway, even though the battery worked, lights worked and the beeps worked…. as you stated, the battery did not have enough “juice” to completely retract the boltwork. A quick trip to the drug store, a new battery and everyone’s happy again. ^5

We love hearing stories like this! Glad we could help!

I just bought a 24 gun stack on safe. Got home and the code I put in worked every time now 2 days later I pressed the keypad and makes no beep and when I press one number from my code such as 0 it beeps and when I finish the code, the yellow light flashes 3 times. I can still get in the safe with the back up key but it’s frustrating that 600 safe keypad won’t work when it did yesterday and the day before with no issues! Their customer support is closed till Monday. I disconnected everything and when I plug it back in it just beeps and does nothing on the keypad and just put in a energizer battery brand new!

Hi I just bought the same safe you havr and having the same problem as you. Have you figured it out yet? Any help will be appreciated.

I called stack on customer service and they walked me through the problem. The black piece on the motherboard was loose which causes only one Or two buttons to work. They sent me all new parts for free and works perfect. I would just call them and they will help u out.

Thanks alot. I lef it alone awhile after messing with the wires and it wasnt doing anything and went back about an hour later now its fine. I guess it was a loose connection and it needed time to reset lol. Glad it also came with keys.

We put the five number code in but the handle doesn’t go all the way down

Handle won’t push down all the way

Hi I have a safe that uses the lg basic 3710. The keypad has stopped working and the safe is locked. There is no power going to the key pad even though I’ve replace the 9V battery with a new one. The supplier is charging me more than the cost of a new safe to get access to my contents (I feel as if I’m held to ransom). Can I peel off the existing keypad and replace it with a new electronic Lagard keypad, get the safe door opened, get access to my contents and have a working safe? Thanks

Does it not come with a back up key? Also I wouldn’t go through the company unless your motherboard is defected and they send u another one like I got when mine quick working. I got it for free. But you should’ve gotten a back up key if it’s electronic

Also, there is a motherboard inside the safe so u would have to open the safe to even get to the motherboard. Check all the connections and pull out the ribbon from the key pad from the circuit board and then plug it back in. Usually comes loose

Hi Brandon Thanks for the feedback. Unfortunately the safe has no key hole … it cannot be opened by a key. The only access is through the keypad. Considering that I’ve had the safe for 15 year I think the circuitry has died (even though you would expect a commercial quality safe would last a lot longer). I was only wondering that, if I did peel away the keypad, removed the ribbon cable (I think the circuitry is within the keypad) and reconnect it to a newer model keypad (such as the Lagard LG Basic II) that maybe I can unlock the safe and, not only get access to my contents, but at the same time have a secure safe again. I’m only asking for advice before I attempt anything ….. Thanks

To be honest I couldn’t tell u. But I know there is a motherboard and a circuit board and one is inside the safe by the locking mechanism

Thanks Brandon. I’ll do some more research before I make a final decision.

i am have the same problem. it is a cannon safari safe.. no key!

Call the company is the best option you have and have then figure it out. Always try the battery and unplug what u can and reset it. If not call the company and they could either send somebody to help u out or even send u new parts to get in the safe

I’m a safe technician in Southern California, I specialize in troubleshooting service and repair of gun safes, money safes, inventory safe, utility safe and have a variety of locks, keypad and or complete lock kits at a very affordable price if interested please contact me at [email protected]

I have an problem in keep safe …That is ….When I entered password after that it’s shows me timers again again …What should I do….Plzz help me

Make sure that your battery terminals aren’t corroded because that’s what was wrong with mine. As soon as I cleaned up the terminals it worked

I have an amsec esl5 electronic lock on a tactical gun safe that drains a 9V battery in 3 days. At this point the lock won’t open even with a fresh battery it beeps four times when I enter the correct code or the default code. What are my options?

We have a challenger tall gun safe. The code is beeping but when it comes to turn the bolt to open it it will not move… It usually makes a noise after code of it moving the bolts to open it is no longer doing that… Help please

I have a Patriot safe that I bought from a guy that buys Estate sales. He did not have the keys nor the numbers for the key pad.so I got it for a great price. Well after getting it home I find out Patriot Safes are out of buisness now. What do I do?

I had (note, had) an OA3810 SentrySafe. It wouldn’t open either. First I removed the 4 AA batteries, put in fresh ones. Nope. I installed a 9v. Nope The solenoid on the OA3810 is apparently on the upper right corner – getting physical. Tapping it with a mallet failed,beating it everywhere failed. So did the Rare Earth magnet I ordered, trying to get the solenoid to move. Nada. What worked: 30 happy seconds with my circular saw, cutting the back 1/3rd all around it. Then a bit of prying with my flat shovel, maybe 5 minutes, exposing the back wall of the inner plastic. The I carefully circular-sawed a square cut at the edges…got my stuff out.

I own a Sentry Model 1610 which I inherited. I have recently moved house and can’t open it. I have changed the batteries and they appear to be OK. I have used the original programmed numbers but to no avail. HELP

Thanks, you saved my life. I didn’t know that a simple battery change would solve my problem. I had luck to read your posting before contacting technicians which could have costed a lots.

My husband’s gun safe’s lock has broken, and I had no idea what to do. I don’t want the kids to get into it and hurt themselves, so I was glad to see your tips. I am especially glad for your last tip about disconnected and damaged wiring because I suspect that may be the problem. Now I just need a locksmith to fix it.

Cabela gun safe won’t open. Bought used over a year ago. From what I read sounds like I need to change battery. Multiple beeps sound and light flashes, but won’t open. I assume battery is on inside. What do I so

My electronic lock is continuously beeping, or makes 2 beeps when I try to enter the code what is wrong with my safe?

The lock is in lock out. Lock out is a security feature that is activated when an incorrect code is entered multiple times. To resolve the issue do not remove the batteries, walk away from the safe and do not push any buttons for 20 minutes. After 20 minutes, if you know the code you can key it in to the lock and open the safe. If you do not know it, you will need to contact us to obtain the over ride code. You are welcome to call our office if you have any questions about your Gardall products.

Search forums
Accessories and related gear

CANNON safe problems. Fixed for now...

Thread starter harbinger
Start date Oct 28, 2016

Well-Known Member

Got home today and took out a pistol to shoot closed the safe up and 30 min later darn thing wouldn't open. Called Cannon and after a hour on the phone to india finally got it open. Seems like the locking mech. is dead. They are sending a new one out but I kinda lost my confidence in the thing now. What if I needed to get in it and this happens again? I should've gotten a tumbler lock instead of the electric one. :facepalm:

NCGunOwners

Advertisement.

RE: CANNON safe problems You can still replace it with a combo lock ... http://www.youtube.com/watch?v=mjmLG8tNfWQ

ericcartman

RE: CANNON safe problems Sounds like they're still having issues: http://michaelbane.blogspot.com/2008/12/cannon-safe-failure.html http://michaelbane.blogspot.com/2009/01/very-last-cannon-safe-story.html

Bubbasuwannee

RE: CANNON safe problems My dad had this same issue with his Cannon. Took about 2 months to finally get the parts to fix it. This was on a few month old safe.

RE: CANNON safe problems I don't want to pile on over the debate over an electronic lock vs a manual dial. But call me old school, I much prefer a manual dial, sure it may take a bit longer to open it but one thing I will know for certain, the chances of it failing are slim. I looked at both electronic and manual, the big tipping point was when I was looking at a well respected brand of safes, this particular model had an electronic lock on it, as I was entering the default store code the entire outside of the lock fell into my hand, leaving a hole and two wires coming through. That pretty much sealed the deal for me.

RE: CANNON safe problems morepower said: nYou can still replace it with a combo lock ... http://www.youtube.com/watch?v=mjmLG8tNfWQ Click to expand... Think this is what I will do.

RE: CANNON safe problems Bubbasuwannee said: My dad had this same issue with his Cannon. Took about 2 months to finally get the parts to fix it. This was on a few month old safe. Click to expand... I picked mine up first week in Sep. Guy I spoke with gave me a incident number and said it should be here in a week.

Schattenreiter

RE: CANNON safe problems I have a safe with the electronic lock. So far (knock on wood) no problems and I have had it for years. I also have several lock boxes with electronic locks and I have had issues with one of them. When you enter the correct code each number gives a green light while incorrect ones give a red light. Once the green light comes on it is supposed to pop open. I could enter the correct code and get the green light but it wouldn't open. I finally found the problem was the battery even though the battery in it was new (sort of). I found out that just because you just purchased a battery does not make it new. Batteries sometimes sit in the store for a long time before being purchased. When I tried a different (NEW) battery it worked just fine. Also helps to use a good quality battery. The electronic locks don't like the cheap ones.

RE: CANNON safe problems I had a safe with an electronic lock about 20 years ago--- will never own another one--nothing but trouble

RE: CANNON safe problems harbinger said: Bubbasuwannee said: My dad had this same issue with his Cannon. Took about 2 months to finally get the parts to fix it. This was on a few month old safe. Click to expand... I picked mine up first week in Sep. Guy I spoke with gave me a incident number and said it should be here in a week. Click to expand... Hopefully that's true. They told my dad that too, but he had to call back multiple times and waited for about 2 months. This was early this year.

RE: CANNON safe problems I've been having problems with my Cannon Safari.Mine was battery drain problem the factory battery lasted a year or so and went dead and i went to staples and bought a new battery and it still wouldn't open..??? The new battery was expired.I went back and got the Super duper Duracell and it went dead in about three or four months.I hate that it won't open when i need it too.I don't like to leave guns out of the safe in case it won't open kinda defeats the purpose of having a safe.

RE: CANNON safe problems Bought a new Treadlock safe over 30 years ago. It has a S&G combination lock on it and has never given a moments problem. After outgrowing my old Treadlock (still have and use it), I bought a new Liberty. It too has a S&G combination lock on it. I wouldn't own anything else.

Brass Buzzard

RE: CANNON safe problems OPSMAN said: I looked at both electronic and manual, the big tipping point was when I was looking at a well respected brand of safes, this particular model had an electronic lock on it, as I was entering the default store code the entire outside of the lock fell into my hand, leaving a hole and two wires coming through. That pretty much sealed the deal for me. Click to expand... Was this an AMSEC safe?

RE: CANNON safe problems Brass Buzzard said: OPSMAN said: I looked at both electronic and manual, the big tipping point was when I was looking at a well respected brand of safes, this particular model had an electronic lock on it, as I was entering the default store code the entire outside of the lock fell into my hand, leaving a hole and two wires coming through. That pretty much sealed the deal for me. Click to expand... Was this an AMSEC safe? Click to expand... No it was not an AMSEC, it was a Champion. I considered an AMSEC but at the time I could not afford one, they make an excellent safe.

RE: CANNON safe problems OPSMAN said: Brass Buzzard said: Was this an AMSEC safe? Click to expand... No it was not an AMSEC, it was a Champion. I considered an AMSEC but at the time I could not afford one, they make an excellent safe. Click to expand... I have one of their 50 gun models, and it has an electronic lock assembly that twists off to change the battery. I was leary of it at first, but it has functioned fine and I use it sometimes several times daily.

RE: CANNON safe problems When it comes to safes, OPSMAN knows his stuff. I always go w a mechanical lock, either way. I prefer it.

The Queen Bee

RE: CANNON safe problems Mechanical lock for me. I don't trust something that runs off of batteries - they will invariably fail.

RE: CANNON safe problems Going to talk with a Locksmith Monday about installing a tumbler for me. By the time I buy the drills to put a hole in the door I think It will be the easiest way.

RE: CANNON safe problems I bought a mechanical lock because I thought if there was ever a world without batteries, mine will work just fine. Sometimes the old way is the best way.

RE: CANNON safe problems I know 2 people personally that have had issues with electronic locks. One had to be drilled. 1. always go with dials 2. Drake in Roxboro, NC makes really high quality safes (no website, only on Facebook). Swing by his shop and take a look at them being constructed and you can see for yourself what quality looks like. Less fireproofing, but greater security.

NCGO Vendors

Share this page

Forum statistics, latest posts.

Latest: Mad Scientist
19 minutes ago

Latest: bc.cruiser
Today at 7:06 PM

Latest: badbadman
Today at 7:04 PM

Latest: JohnMc
Today at 5:45 PM

Latest: weaponoffreedom
Today at 1:43 PM

Latest profile posts

Members online.

DystruktoBoi1
wheelgun_man

Want to highlight a helpful answer? Upvote!

Did someone help you, or did an answer or User Tip resolve your issue? Upvote by selecting the upvote arrow. Your feedback helps others! Learn more about when to upvote >

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Safari beeps when clicking or typing, and most menu options are grayed out, including Quit

I recently reloaded and fully updated High Sierra on my MacBook Air 2012 13", and Safari is acting very strangely. When I launch it, I can't click or type in the browser window. It just beeps when I do. Also, most menu items are grayed out, including Quit! So I can't browse, and I can't even close Safari either without resorting to Force Quit.

I can't get to Preferences, because that's grayed out too, but I have manually deleted caches, saved state, and history as described in this post . It had no effect. I've rebooted multiple times.

What can I try next to reset Safari to a normal state?

MacBook Air

Posted on Apr 22, 2019 8:40 AM

Posted on Apr 22, 2019 8:48 AM

You may have adware/malware installed. Try downloading this program which was written by Thomas R, a long time poster. The program will search for malware/adware The program will do the work for you which makes it easy. It may be necessary to run more than one scan. After running the scans, restart the computer.

Malwarebytes Anti-Malware for Mac 10.10 and later

Malwarebytes uninstall

Try setting up another admin user account to see if the same problem continues. Please post back on whether or not this worked. Also try the Safe Mode. Please post back on whether or not this worked.

Isolating an issue by using another user account

Safe Mode - About

If it works in the Safe Mode, try running this program when booted normally and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read. Click “Share Report” button in the toolbar, select “Copy to Clipboard” and then paste into a reply. This will show what is running on your computer. No personal information is shown. If the log won’t post, try posting it in Pastebin and provide a link in a reply Pastebin

Etrecheck – System Information