bushnell tour v3 won't vibrate

BUSHNELL SERVICE SITE

• Tour V3 Instruction Manual

Instruction manual for the Tour V3 and V3 Slope laser rangefinder. Apr 27, 2020 • Knowledge

Apr 27, 2020 1.6 MB pdf

Trending Articles

• Tour V4 Instruction Manual
• Tour V2 Instruction Manual
• Installing iGolf Sync Application on Computer
• Wingman Instruction Manual

How to Fix a Golf Rangefinder? A Comprehensive Guide for Golfers

A friend once asked. While I didn’t have a direct answer, I wished he had been more specific. This is a rather broad question. When addressing how to fix a golf rangefinder, it all depends on the part and the problem.

• 1) How to fix golf rangefinder?
• 2) Which are the main parts of a golf rangefinder?
• 3.1) Blank Display
• 3.2) No Readings
• 3.3) Unclear Readings
• 3.4) Difficulty in capturing the target
• 4) How to hold golf rangefinder steady?
• 5) How to calibrate a golf rangefinder?
• 6.1) Not all Golf Rangefinders are created equal
• 7) Why is My Bushnell Rangefinder Not Showing Yardage
• 8) Why is My Bushnell Rangefinder Blurry
• 9) How to Find Bushnell Rangefinder Replacement Parts
• 10) Why Did My Bushnell Rangefinder Stopped Working
• 11.1) Method #1 – Resetting the Batteries
• 11.2) Method #2 – Using Clear Display Button
• 12.1) Warranty Terms
• 13) How to Get Your Bushnell Rangefinder Repair Manual
• 14) What type of battery does the Bushnell Tour V2 use?
• 15) Steps When Doing a Bushnell Tour v2 Troubleshooting
• 16.1) Problems with Bushnell Tour V2 Slope Edition?
• 17) How do you turn on a Bushnell Tour V2?
• 18) How to Reset Bushnell Tour v2 Golf Rangefinder
• 19) How do I change my Bushnell Tour V2 from meters to yards?
• 20.1) Replacing the battery
• 20.2) Changing Bushnell Tour v3 Rangefinder meters to yards
• 20.3) Target range cannot be obtained
• 21.1) Bushnell Tour V4 Problem – LCD does not illuminate
• 21.2) Bushnell Tour V4 Problem – Display goes blank
• 21.3) Bushnell Tour V4 Problem – Cannot obtain the target range
• 22) Bushnell Tour V4 Troubleshooting Tips
• 23) How do I change my Bushnell Tour V4 meters to yards?
• 24) What to do when Bushnell Tour v4 Stuck in Setup Mode
• 25) What kind of battery does a Bushnell Tour v4 Battery Uses
• 26) What is the battery life of a Bushnell Tour v4 Battery
• 27) What size is the Bushnell Tour v4 Battery size
• 28) What is a Bushnell Tour v4 Battery Cap
• 29) How to change a Bushnell Tour v4 Battery
• 30) How to Restore Factory Defaults doing a Bushnell Tour v4 Hard Reset
• 31) What is a Bushnell Tour v5 Shift
• 32) Troubleshooting a Bushnell Tour v5 Shift Problems
• 33) Why is your Bushnell Tour v5 Shift Slope not Working
• 34) What type is a Bushnell Tour v5 Shift Battery
• 35) What are the known Bushnell Tour v5 Problems
• 36) Why is the Bushnell Tour v5 Manual Important
• 37) How to do Bushnell Tour v5 Hard Reset
• 38) How do I turn on my Callaway 300 Pro Rangefinder?
• 39) How do you turn off the slope on a Callaway 300 Pro?
• 40) How do you change a Callaway 300 Pro Rangefinder from Meters to Yards?
• 41) Tec Tec Tec Rangefinder Problems and Troubleshooting
• 42) What To Do If Your Boblov Rangefinder Not Working
• 43) Final Thoughts
• 🔧 To fix a golf rangefinder, it’s important to identify the specific problem.
• 👀 Common problems include a blank display or broken lenses.
• 👉 The procedure for fixing each problem may vary.
• 🏌️‍♂️ Major parts of a rangefinder include the lens, display, power button, focus ring, and measurement button.
• 🤔 Knowing the different parts of a rangefinder can help in diagnosing and fixing issues.
• 💡 It’s recommended to consult the manufacturer’s manual before attempting any repairs.
• 👨‍🔧 It may be necessary to seek the help of a professional repair service for some issues.

#GolfRangefinder #GolfTools #DeviceRepair #GolfEquipment #Troubleshooting

Typically, there are different parts of a rangefinder. They are all subject damage. And, fixing each part might not need the same procedure.

For instance, we have the mode button, eyecup, battery chamber cover, and objective lenses.

How to fix golf rangefinder?

When addressing how to fix a gold rangefinder, it’s only fair that I also address the common problems experienced.

Fixing a blank display might not require the same procedure as repairing broken lenses.

Which are the main parts of a golf rangefinder?

Why is knowing the different parts of a rangefinder important? Well, this helps one quickly pinpoint the problem. For instance, knowing a specific part helps you decide which method to use for fixing.

Typically, rangefinders have the following:

• mode button
• battery chamber
• strap eyelet
• objective lenses
• power button

Knowing these parts also helps you check for issues with ease. Of course, getting conversant with the different parts also helps in maintenance.

What are the Common Problems with Golf Rangefinders

In order to know how to fix a golf rangefinder, we first address the different possible problems. There are various problems, including blank displays and inaccurate data.

Some people also face issues like difficulty in reading the measurements and some people ask how to keep a golf rangefinder steady.

Note that, a broken or completely dysfunctional rangefinder is fixed by professionals. The DIY steps highlighted below only apply to simple problems requiring basic knowledge.

For that reason, don’t attempt to repair your broken rangefinder if you aren’t an expert.

Of course, some problems stem from the inability of the user to understand the new technology. Rangefinder technology has seen a steady rise over time.

Currently, we have sophisticated models requiring more skills.

Below are the common problems you’d expect to encounter:

Blank Display

This is a common problem. Before attempting anything else, try changing the mode. Changing the mode always solves the problem for most people.

However, if this step fails, then it could be an indication for a more serious condition.

So, what do you do next? If switching modes doesn’t solve a blank display, go back to your manual. Read word by word, sentence by sentence, and letter by letter.

I mean, read carefully. Try crossing all the t’s and dotting all the I’s before attempting anything else.

Using the manual, try transitioning through all the modes once more. This could involve other modes not included in the mode button.

The blank display could also result from loose connections. This is a rather tricky situation requiring professional assistance.

For that reason, unless you are a professional, consider contacting the manufacturer.

Opening the device to fix loose connections could void your warranty. So, just contact the manufacturer for extra assistance.

However, as earlier said, if you are a professional, you could attempt fixing the loose connections.

Simply open the device, spot the loose connections, and fix them. However, this is only for professionals!

No Readings

This is another common problem associated with rangefinders. What causes it? Well, there are various causes of faulty readings.

Albeit common, this is a rather tricky problem. Like the previous problem, faulty readings could result from a change in mode.

For that reason, use the mode button to change the modes. Of course, you should use the manual when solving this problem.

Why use a manual? Well, different manufacturers recommend different steps for solving it.

Most of these problems depend on the brand of rangefinder you own. That’s why most solutions work on a specific rangefinder and fail on another.

Unclear Readings

This problem occurs quite often. It also indicates a change in mode. However, this might not be the case. So, you should carefully inspect the device.

The first step is trying to change modes. If that fails, try combing through the manual for any suggestions. Different brands could offer different solutions.

If these steps fail too, check the lenses as well. They could be blurred by dirt or other substances. If that’s the case, you should clean it.

Cleaning the lenses requires utmost care. You don’t watch to scratch them, do you? There are specific liquids for cleaning, better use them.

Of course, the lenses could also have stains on the insides. In that case, dissemble the rangefinder and use a wet soft cloth to wipe any dirt or dust. You could also consider replacing the lenses.

In case all the steps fail, consider contacting the manufacturer of further assistance.

Difficulty in capturing the target

Still, looking for how to fix golf rangefinder ? This is another common problem.

How do you solve it? Well, this calls for some serious steps. It mostly results from faulty readings. So, fixing faulty readings could, consequently, fix it.

To perfectly focus on the target, always keep the rangefinder clean. For instance, regularly clean the lenses. Besides dirty lenses, this issue could also be as a result of weak batteries.

What do you do when the batteries are weak? Of course, get a new pair.

Of course, ensure you have tested all the other steps before buying new batteries. I mean, this ought to be the last step.

Fixing new batteries requires minimal skills. Simply open the battery chamber and connect them. In case of any problem, refer to the user manual.

How to hold golf rangefinder steady?

An amateur once rushed to me, looking quite worried. Don’t ask how I knew he was worried, I can tell!

“Excuse me, sir, how do you keep your rangefinder steady?” He asked. I blankly stared at him then answered, “I don’t really know, I guess it’s through practice.”

I could only say then that practice is the answer on how to hold a rangefinder steady.

Well, I am going to give the same answer, there’s no formula for holding your golf rangefinder steady.

However, since you came looking for some suggestions, I have a few for you on how to keep a golf rangefinder steady.

For a steady golf rangefinder, always buy something big enough to fit into both hands. Using two hands enhances rangefinder stability.

One of the secrets on how to keep a golf rangefinder steady is by using one that suits you. Make sure you are comfortable holding the unit.

Different rangefinders can have a different fit which can affect how to hold a rangefinder steady.

Another is to do some steady hand exercises. There are strength exercises that can improve your dexterity. That might be your answer on how to hold a rangefinder steady.

Something else, to learn how to hold a rangefinder steady, PRACTICE! PRACTICE! PRACTICE!

How to calibrate a golf rangefinder?

How do I calibrate my rangefinder ? This varies from one manufacturer to the other. However, from my experience with Bushnell Neo, I can offer a few tips.

To calibrate, try finding a place within the course where the device indicates zero meters from the first green. At that point, all the other points go off a similar amount.

However, the feature isn’t pre-programmed, so it works with created maps.

How to change golf rangefinder from meters to yards?

Are you searching for how to change golf rangefinder from meters to yards? Do you always ask, “how do I change my rangefinder from meters to yards?”

Well, I got you. This question pops up quite often on different platforms. However, no one ever seems to have a convincing answer.

Lift your hand- have you ever successfully hard-reset a phone? And, did you use the same method for iPhone and Samsung phones?

If your answer to the first question is yes, then the obvious answer for the second one is a big NO!

So, what’s the relation between the two, a phone and a rangefinder? Well, calm down, I’m coming there. First, calibrating your rangefinder greatly depends on the brand.

Just like hard resetting a phone, different manufacturers recommend different steps.

So, you ask, “How do I change my rangefinder from meters to yards?” For our discussion, I am going to use a Bushnell Tour V3.

This device offers a switch in readings between yards and meters.

However, the process isn’t an ABC, like most people would want to assume. It involves a few steps. I will walk you through the steps below.

Not all Golf Rangefinders are created equal

As a disclaimer, though, these steps might not work for all golf rangefinders, so consult with the manufacturers if not using Bushnell Tour V3 .

Before buying, you can already ask them “how do I change my rangefinder from meters to yards?”

By default, the rangefinder offers readings in yards. However, for your convenience, you can change to meters. So, how do you do that?

First, switch the device off completely. This step should be a problem for most people. That’s because there’s a button for that purpose.

After you turn it off, attempt to turn it on but still hold the power button for like five minutes. I mean, even after it turns on, keep holding the button for like five minutes.

After the five minutes, the readings start interchanging between meters and yards. At this point, you simply choose the meters.

To go back to yards, you repeat the procedure then choose the yard readings.

Of course, reading the manual helps one get the instructions on how to change between meters and yards.

However, not all brands offer this feature so you need to be careful when making a purchase.

If it is important to you, ask right away, “how do I change my rangefinder from meters to yards?”

Why is My Bushnell Rangefinder Not Showing Yardage

If your Bushnell rangefinder not showing yardage on the screen then try out different environments, figure it needed a calibration adjustment.

This is something that the manufacturer recommends doing every year or two as it’s very likely for your device to shift slightly over time due to its sensitive optics.

The good news is that the process of calibrating a Bushnell rangefinder won’t show yardage is easy!

• All you need are these simple steps:
• Turn off your device
• Remove any lens caps from front
• Point the range finder at an object at least 50 yards away
• Press and hold down both buttons until the word “Calibrating” appears on the screen

The words ‘calibrating’ will be displayed for about one minute and then your Bushnell rangefinder not showing yardage problem should be fix at this point.

Why is My Bushnell Rangefinder Blurry

Golfers have been using Bushnell Rangefinders for years to measure the distance between themselves and their target. Recently, golfers have begun noticing that their Bushnell rangefinder is blurry or has a foggy film over it.

This can mean one of two things: either your battery needs to be changed, or there is dirt or debris on the lens. If you clean off the lens with a lens cleaning cloth, your rangefinder will work as expected again.

Another reason, it turns out that you must recalibrate your rangefinder every time you change from fairway to rough terrain and vice versa in order to get clear pictures again.

Follow the section above, Bushnell Rangefinder Not Showing Yardage, for step-by-step to recalibrate your Bushnell rangefinder being blurry.

How to Find Bushnell Rangefinder Replacement Parts

One thing that can happen with your Bushnell rangefinder is that they can break down due to wear and tear or just because it gets dropped too much.

If this happens then you may need Bushnell rangefinder replacement parts in order to fix your device. There are two main things that people look for when they need Bushnell rangefinder replacement parts.

Read your Bushnell rangefinder product manual and try to identify exactly the name of the part that you want to replace.

Search online where they can order anything from a single Bushnell rangefinder component to an entire kit of Bushnell rangefinder replacement parts.

If your device is still under warranty you can contact Bushnell if they will replace the part and repair it for free.

Consult your product manual on how to initiate a Bushnell golf rangefinder repair and parts replacement.

Why Did My Bushnell Rangefinder Stopped Working

Are you frustrated and wondering, Why Did My Bushnell Rangefinder Stopped Working? What is the cause of this issue?

There may be an easy fix. Your Bushnell rangefinder has stopped working because it is probably just dirty and needs to be cleaned.

You can clean your rangefinder by going into the menu settings and finding “clean.” The instructions will tell you how to proceed from there.

Other reasons would be that the Bushnell rangefinder needs the battery to be replaced or just needs to be recalibrated.

If these are not the issue and you still can’t get it working, contact Bushnell customer service for assistance.

How Do I Reset My Bushnell Rangefinder

Do you ever find yourself in the middle of a game and your Bushnell rangefinder stopped working? And now wondering, How Do I Reset My Bushnell Rangefinder?

We will show you 2 ways on how do you reset a Bushnell rangefinder.

Method #1 – Resetting the Batteries

• Remove the battery cap on the back of the unit
• Take out the battery and put it back in again
• Turn on your device by pushing down on both buttons at once for 2 seconds

Method #2 – Using Clear Display Button

Use the “Clear Display” button on the back of the device. This will clear all current readings from your screen and allow you to start fresh with a new reading.

Your have reset your Bushnell rangefinder is now ready to help you play golf.

How to Get Bushnell Rangefinder Repair

If you have a legitimate Bushnell Rangefinder , you should have a 2-year warranty. This warranty entitles you to a free Bushnell rangefinder repair.

Below, I will share with you how to get a Bushnell rangefinder repair.

To check if your Bushnell Laser Rangefinder is authentic, check for the serial number sticker on the outer package. If the serial number is missing or obscured, the unit may be counterfeit.

If this is the case, Bushnell will not honor any warranties.

However, if the serial number is intact, you can take advantage of professional help for your Bushnell rangefinder repair. To do so, you can go to the repair request site .

Simply input your information. The site encourages the input of the e-mail address so they can send you updates.

Make sure to input the product description so they know what they will deal with. By doing this, you help them act on your request faster.

As a result, your Bushnell rangefinder repair would happen much faster.

In the comments, you can put which particular Bushnell golf rangefinder parts you need help with.

Below are the common Bushnell golf rangefinder parts and some conditions on Bushnell’s 2-year warranty.

Warranty Terms

When discussing how to get Bushnell rangefinder repair, we need to consider their warranty terms.

Bushnell ensures that your laser rangefinder should be free of defects for 2 years.

If a defect does occur, Bushnell can repair or replace your laser rangefinder if you provide the following:

• Check/money order in the amount of $10.00 for postage and handling cost
• Name, address, and daytime contact number for product return
• An explanation of the defect
• Copy of your dated proof of purchase

Do not include any accessories when sending your rangefinder. Take note that the warranty will not cover damages resulting from misuse and improper handling.

Installation and maintenance done by a non-Bushnell representative will also void the warranty.

If you are past the 2-year warranty, you can still ask for help from your manufacturer. They also sell Bushnell golf rangefinder parts if needed.

However, the installation of Bushnell golf rangefinder parts may still be best left to professionals.

How to Get Your Bushnell Rangefinder Repair Manual

If you are a Bushnell rangefinder owner, then you know how frustrating it can be when your device malfunctions.

A Bushnell rangefinder repair manual is an indispensable tool for any Bushnell rangefinder owner since it provides information on the most common problems and what to do about them such as when your Bushnell rangefinder not showing yardage or Bushnell rangefinder won’t show yardage, Bushnell rangefinder blurry or just researching for Bushnell rangefinder replacement parts.

The Bushnell rangefinder repair manual also includes a Bushnell rangefinder troubleshooting guide that will give you step-by-step instructions for repairing many different types of issues with your device.

The Bushnell rangefinder repair manual is an important document for anyone who has a Bushnell rangefinder that needs to be serviced or repaired.

But how do you obtain it? If you have lost or misplaced your Bushnell rangefinder repair manual, then don’t worry!

Just follow the links below:

• Bushnell Pro Xe Manual
• Bushnell Xe Manual
• Bushnell Golf Pro Xe Manual
• Bushnell Pro Xe User Manual
• Bushnell Pro Xe User Guide
• Bushnell Pro Xe Quick Start Guide
• Bushnell Tour V5 Manual
• Bushnell Tour V5 Quick Start Guide
• Bushnell Tour V4 Manual
• Bushnell Tour V4 User Guide
• Bushnell Tour V4 Quick Start Guide
• Bushnell Tour V3 Manual
• Bushnell Pro X2 Manual
• Bushnell Tour X Manual
• Bushnell Hybrid Lazer/GPS Rangefinder Manual
• Bushnell Hybrid Lazer/GPS Rangefinder Quick Start Guide
• Bushnell Phantom GPS Rangefinder Manual
• Bushnell Phantom GPS Rangefinder Quick User Guide
• Bushnell iON2 GPS GPS Rangefinder Manual
• Bushnell iON2 GPS GPS Rangefinder Quick User Guide

What type of battery does the Bushnell Tour V2 use?

The Bushnell Tour V2 uses a 3-volt lithium battery. This type of battery is known for its long life and reliability.

Typically, 3-volt lithium battery is often used in small electronic devices because it provides a long shelf life and high energy density.

Steps When Doing a Bushnell Tour v2 Troubleshooting

Bushnell Tour V2 troubleshooting can be a difficult process. However, there are a few things you can do to try and fix the issue.

First, check to make sure that the laser is properly calibrated.

Second, make sure that the batteries are fresh and properly installed.

Finally, clean the lens of the laser with a soft, dry cloth.

If you still cannot get the laser to work properly, then you may need to contact Bushnell customer service for further assistance.

Are you Experiencing a Bushnell Tour v2 Problems

There have been a few reports regarding the Bushnell Tour V2 problems.

Some users have reported that the device will not turn on, while others have said that it is not accurately measuring distances.

It is unclear at this time if these problems are widespread or if they are isolated incidents.

If you are experiencing any problems with your Bushnell Tour V2,  please contact customer service for assistance.

Problems with Bushnell Tour V2 Slope Edition?

There are several complaints about the Bushnell Tour V2 Slope Edition.

Some users say that the device is inaccurate, while others have had problems with the battery life.

Additionally, some people find the device difficult to use, especially when trying to get accurate readings on hills.

How do you turn on a Bushnell Tour V2?

To turn on your Bushnell Tour V2, hold down the power button for three seconds.

The device will emit a startup sound and the display will light up. You can then release the button.

If the device does not turn on, make sure that the batteries are properly installed and/or replaced.

How to Reset Bushnell Tour v2 Golf Rangefinder

To reset your Bushnell Tour V2, follow these steps:

• Press and hold the power button for 10 seconds.
• Remove the battery cover and batteries from the back of the unit.
• Re-install the batteries and battery cover.
• Press and hold the power button for 3 seconds to turn on the unit.

How do I change my Bushnell Tour V2 from meters to yards?

In order to change your Bushnell Tour V2 from meters to yards, you will need to follow these steps:

• Press the mode button on the front of the unit until “M” or “Y” appears in the lower left-hand corner of the display.
• Use the up and down arrow buttons to scroll through the options until “Y” (for yards) is highlighted.
• Press the mode button again to lock in your selection.

How to Operate and Repair a Bushnell Tour v3 Rangefinder

Do you have the Bushnell tour v3 laser rangefinder? If so, I can provide you some tips on Bushnell tour v3 repair.

With the help of the Bushnell tour v3 manual, here are the Bushnell tour v3 instructions.

I will provide you with Bushnell tour v3 instructions on how to operate and repair a Bushnell Tour v3 Rangefinder. You will also know how to change the Bushnell tour v3 meters to yards.

Replacing the battery

To remove the Bushnell Tour v3 battery cap, lift the tab and rotate the cap counter-clockwise. Put in a new CR-2 3-volt lithium battery with the positive end first. Then, put the battery cap back.

The Bushnell tour v3 manual recommends that you replace the Bushnell Tour v3 battery every year. Also, replace the battery when the low battery indicator is displayed in the in-view readout.

For many concerns, replacing the Bushnell Tour v3 battery may be the easiest way to do Bushnell tour v3 repair.

Changing Bushnell Tour v3 Rangefinder meters to yards

For some, it is important to change the Bushnell tour v3 meters to yards.

To see the current unit being used, check the indicator in the lower right portion of your LCD. To change it, press and hold the POWER/FIRE button.

The Bushnell tour v3 meters to yards instructions indicate that the following options will show up:

• Yards w/ JOLT
• Meters w/ JOLT

To convert your Bushnell tour v3 meters to yards, release the POWER/FIRE button when the LCD states “yards” or “yards w/ JOLT.”

According to the Bushnell tour v3 manual, the JOLT feature is a signal feature.

It will give you a vibration signal when the Pinseeker technology detects the flag. Try this feature when you change Bushnell tour v3 meters to yards.

Target range cannot be obtained

Check that the LCD is illuminated and the POWER/FIRE button is being depressed.

If this does not work, ask for professional help on Bushnell tour v3 repair. There are other problems that can arise.

Sometimes, the Bushnell tour v3 manual is enough to help you with your Bushnell tour v3 repair.

Generally, the manual can answer most queries on how to operate and repair a Bushnell Tour v3 Rangefinder.

However, always ask an expert if needed. Sometimes, the Bushnell tour v3 instructions may be too vague for non-experts.

How to Repair a Bushnell Tour v4 Rangefinder Problems

The Bushnell Tour V4 rangefinder is a great tool for golfers who need accurate distance measurements. However, it’s not perfect.

If you have this type of laser rangefinder instead, you might encounter some of these Bushnell Tour v4 problems. Sometimes, the rangefinder malfunctions and doesn’t work properly.

If you’re having problems with your Bushnell Tour v4 rangefinder, there are a few things you can do initially to try and fix it at home.

There are some common problems that users have with the device. One problem is that the mode button can be difficult to press including issues with the accuracy of the readings and the battery life.

Another problem is that the user manual does not always explain how to change the mode.

First, remove the Bushnell Tour v4 battery from the rangefinder and let them sit overnight. Then, turn off the power switch and wait 24 hours.

Afterward, replace the batteries and turn the power back on. This should fix most issues.

If this still doesn’t work, try removing the Bushnell Tour v4 battery cover and cleaning out the contacts inside that the laser is clean.

Additional instructions for doing this can be found in the Bushnell Tour v4 manual.

If you are still having problems, here are some tips on how to repair problems with your Bushnell Tour v4 rangefinder.

Bushnell Tour V4 Problem – LCD does not illuminate

• Make sure to depress the POWER/FIRE button
• Check if you have not changed the battery in 12 months or the low battery indicator was on. If so, replace your battery with a good quality 3-volt lithium battery.

Bushnell Tour V4 Problem – Display goes blank

The display goes blank when attempting to power the laser

This is one of the most common Bushnell tour v4 problems. But the answer to this is pretty simple.

This might just mean the Bushnell Tour v4 battery is due for replacement. Try replacing the Bushnell Tour v4 battery with a good quality 3-volt lithium battery. If that doesn’t work, seek professional help.

Bushnell Tour V4 Problem – Cannot obtain the target range

Some Bushnell tour v4 problems such as this one may have many root causes.

If you find your Bushnell tour v4 rangefinder not working, try the following:

• Check if LCD is illuminated
• Check if the POWER/FIRE button is depressed
• Check for any obstructions to the objective lenses (lenses closest to the target)
• Check if the unit is held steady while the POWER/FIRE button is being depressed

For other reasons for your Bushnell tour v4 rangefinder not working, consult the Bushnell Tour V4 manual. Again, read everything: word for word, point by point.

Sometimes, as simple dirt on the lens can be the reason for your Bushnell tour v4 rangefinder not working.

Again, if this is the case, use a microfiber cloth. Do not use any abrasives or rough cloth.

I hope this helped you on how to repair a Bushnell Tour v4 rangefinder.

If you still find your Bushnell Tour v4 Rangefinder not working, it would be best to seek professional help.

If your unit is still covered by the warranty, repair for your Bushnell tour v4 problems will still be free of charge.

Bushnell Tour V4 Troubleshooting Tips

If you’re having problems with your Bushnell Tour V4 rangefinder, there are several things you should try before calling tech support.

Here are some tips to help you troubleshoot your Bushnell Tour V4 rangefinder.

• Make sure the Bushnell Tour v4 batteries are fully charged.
• Check the battery connections.
• Try another set of batteries.
• Bushnell Tour V4 hard reset the rangefinder.
• Clean the lens.
• Use a soft cloth to clean the screen.
• Turn off the power switch.
• Remove the battery cover.
• Press down firmly on the top right corner of the display unit.
• Press down firmly on both sides of the display unit.
• Hold the bottom left corner of the display unit and press firmly downward.
• Press down firmly on each side of the display unit.
• Press down firmly on top of the display unit.
• Press down firmly on either side of the display unit until the display unit turns off.
• Replace the battery cover.
• Reinstall the battery pack.
• Restart the rangefinder.
• Call Tech Support and follow the instructions given over the phone.

Additionally, refer to the Bushnell Tour v4 manual to get more in-depth information on Bushnell Tour V4 Troubleshooting guide.

How do I change my Bushnell Tour V4 meters to yards?

To change your Bushnell Tour V4 from meters to yards, simply press and hold the MODE button for 3 seconds.

The mode button is located on the top of the device, just behind the power button.

The display will then alternate between yards and meters.

Release the button to select the desired unit of measure.

Another thing to keep in mind is that if you’re using a rangefinder that uses both yardage and metric measurements, you’ll need to convert the distance into either one before entering it into the device.

This is especially true if you use GPS technology to calculate distances.

What to do when Bushnell Tour v4 Stuck in Setup Mode

Bushnell Tour V4 stuck in setup mode can be frustrating, but there are a few things you can try to get it working again.

First, make sure the batteries are fresh and installed correctly.

Next, try resetting the device by pressing and holding the power button for 10 seconds.

If that doesn’t work, try connecting the Tour V4 to a computer via the USB cable and see if that clears the problem.

If none of these solutions work, then you may need to contact Bushnell customer support for further assistance.

What kind of battery does a Bushnell Tour v4 Battery Uses

The Bushnell Tour v4 battery uses a 3-volt battery, which is not included.

When ordering batteries for this device, make sure to purchase CR2 lithium batteries, as other types will not work.

These can be found at most stores that sell electronics or online.

What is the battery life of a Bushnell Tour v4 Battery

The Bushnell Tour V4 battery has great life thanks to its use of CR2 batteries.

These batteries are known for their long life and reliability, so you can be sure that your device will have plenty of power to last through even the longest rounds of golf.

What size is the Bushnell Tour v4 Battery size

The Bushnell Tour V4 battery uses a 3-volt lithium battery (CR2). We recommend that you use a Bushnell Lithium Battery for the longest life.

If you use an alkaline battery, your rangefinder’s performance may be reduced in cold weather and you may get fewer measurements per battery.

What is a Bushnell Tour v4 Battery Cap

The Bushnell Tour V4 Battery Cap is a small, black cap that attaches to the back of the Bushnell Tour V4 laser rangefinder.

This cap holds one CR2 battery, which is used to power the rangefinder.

The Bushnell Tour V4 Battery Cap is made of plastic and has a small hole in the center for the battery’s positive terminal.

There are also two small metal tabs on the inside of the cap that make contact with the negative terminals on the batteries.

How to change a Bushnell Tour v4 Battery

To change the Bushnell Tour V4 Battery on your golf rangefinder, first remove the two screws on the back of the device.

Next, use a small Phillips head screwdriver to remove the battery cover. Inside, you will see the battery compartment with a small tab.

Use a flathead screwdriver to gently pry up the tab and then slide the old battery out.

To insert the new battery, line it up with the positive and negative symbols in the compartment and then gently push it down until it clicks into place.

Finally, replace the battery cover and screw it back into place.

How to Restore Factory Defaults doing a Bushnell Tour v4 Hard Reset

To perform Bushnell Tour v4 Hard Reset, you need to hold down the power button for about 5 seconds.

Once the power button is pressed for 5 seconds, the rangefinder will reset, clear any stored data, return the rangefinder to its factory defaults and be ready to use again.

After performing the Bushnell Tour v4 hard reset, you’ll see a message saying “Reset Complete”.

This means that the Bushnell Tour v4 rangefinder has successfully returned to its factory default settings.

What is a Bushnell Tour v5 Shift

The Bushnell Tour V5 Shift is a top-of-the-line laser rangefinder that gives golfers the ability to get yardages to the front, back, and center of the green with one device.

It features Bushnell’s exclusive “Shift” technology, which allows the user to accurately compensate for elevation changes.

The Bushnell Tour V5 Shift also has a built-in slope function, which gives the user an accurate reading even when the flagstick is not visible.

It also has the JOLT technology that gives users a short vibration when the laser locks onto the flagstick.

This is a great feature for those who want to make sure they are getting yardages to the right target.

The Bushnell Tour V5 Shift is a high-quality laser rangefinder that provides golfers with accurate yardages to the flagstick.

Troubleshooting a Bushnell Tour v5 Shift Problems

Bushnell Tour V5 Shift problems are a common issue with this golf laser rangefinder model.

Many users have reported that the device will randomly shift between yards and meters, or will show an inaccurate reading.

Sometimes, the problem can be fixed by simply recalibrating the device. Other times, more extensive troubleshooting may be necessary.

If you’re your Bushnell Tour V5 shift problems are starting to show up, there are a few things you can try to troubleshoot the issue.

First, make sure that the batteries are fresh and installed properly.

Next, check to see if the laser is dirty or obstructed in any way – if so, clean it off and try again.

Finally, if the problem persists, you may need to contact customer support for further assistance.

In any case, it is important to consult the Bushnell Tour v5 Shift manual or contact customer support for help with this issue.

Why is your Bushnell Tour v5 Shift Slope not Working

When your Bushnell Tour V5 shift slope is not working, the solution may be to simply turn the device off and then on again.

If that does not work, then the next solution would be to reset the device by holding down the power button for 10 seconds.

If that also does not work, it is recommended that you take your Bushnell Tour V5 shift to a Bushnell service center to have it repaired or replaced.

What type is a Bushnell Tour v5 Shift Battery

Bushnell Tour V5 Shift Battery is a great product for those who are looking for a reliable and affordable battery for their golfing needs.

This battery is designed to work with the Bushnell Tour V5 laser rangefinder, and it provides plenty of power to keep the rangefinder running for a long time.

The battery is also very easy to install, and it comes with all the necessary accessories.

The Bushnell Tour V5 Shift battery uses a type of battery that is not common in other devices.

This can make it difficult to find replacements, but the company does sell them on their website.

The battery life is good, but it will eventually need to be replaced.

What are the known Bushnell Tour v5 Problems

Some Bushnell Tour V5 problems that have been reported include the laser rangefinder shutting down unexpectedly.

Problems with the yardage readings being inaccurate and Issues with the unit not holding a charge for very long.

While some of these problems can be easily fixed by the user, others may require sending the unit back to Bushnell for repairs or replacement.

Why is the Bushnell Tour v5 Manual Important

The Bushnell Tour V5 manual is a comprehensive guide that covers all aspects of using and caring for your Bushnell Tour V5 laser rangefinder.

It includes information on how to set up and use your device, as well as troubleshooting tips and maintenance advice.

Whether you’re a first-time user or an experienced pro, the Bushnell Tour V5 manual is an essential resource for getting the most out of your laser rangefinder.

How to do Bushnell Tour v5 Hard Reset

In order to do Bushnell Tour V5 hard reset when it stops working, simply press and hold the power button for about 10 seconds.

This will reset the device and clear any errors that may have caused it to malfunction.

How do I turn on my Callaway 300 Pro Rangefinder?

To turn on your Callaway 300 Pro rangefinder, simply press and hold the power button for two seconds.

The device will emit a short beep to indicate that it is powered on. You can then release the button.

How do you turn off the slope on a Callaway 300 Pro?

To turn off the slope feature on the Callaway 300 Pro, simply press and hold the “mode” button for three seconds.

This will cycle through the various modes until the slope mode is disabled.

The Callaway 300 Pro is a professional-grade golf laser rangefinder that comes with a variety of features and functions.

One of those functions is the “slope” feature, which can be turned on or off depending on the user’s preference.

How do you change a Callaway 300 Pro Rangefinder from Meters to Yards?

To change a Callaway 300 pro rangefinder from Meters to Yards, first press and hold the Mode button for 3 seconds.

Next, use the Up and Down arrows to select your desired units (Meters or Yards).

Lastly, press the Mode button again to confirm your selection and exit this menu.

Tec Tec Tec Rangefinder Problems and Troubleshooting

There have been reports of Tec Tec Tec rangefinder problems, mostly concerning its accuracy.

Some users have complained that the device is not accurate enough, while others have said that it is completely inaccurate. There have also been reports of the device breaking down after a short period of use.

The following are some of the most common problems that people experience when using their Tec Tec Tec Rangefinders:

1) Does not function at all. This could mean that the batteries are dead or that they were improperly installed. Make sure that the batteries are fully charged before trying to use the rangefinder again. Also, make sure that the rangefinder has power by plugging in an AC adapter.

2) Gives incorrect readings. This usually means that the rangefinder is out of calibration. You should take the rangefinder to a professional who can calibrate it for you.

3) Malfunctions after a certain amount of usage. This could mean that one of the internal components is damaged. In this case, you should contact the manufacturer for help.

4) Breaks down after a short period. It may be defective. Contact the manufacturer for replacement parts.

5) Stops working when the battery dies. Replace the batteries immediately.

6) Doesn’t work on certain types of terrain. For example, it won’t work well on wet grass.

7) Doesn’t always pick up the target correctly. This could be due to poor lighting conditions or because the target was too far away from the rangefinder.

8) Gets stuck in the “on” position. This happens when the batteries die. To get rid of this problem, turn off the rangefinder and remove the batteries. Then, replace them and turn the rangefinder back on.

If you are still having trouble with your Tec Tec Tec golf rangefinder, there are a few common problems that you can check for and try to fix yourself.

First, make sure that the batteries are fresh and properly installed. If the batteries are low or installed incorrectly, the rangefinder will not work properly.

Next, check to see if the lens is clean and free of any dirt or debris. If the lens is dirty, it will affect the accuracy of the rangefinder.

Finally, make sure that the unit is properly calibrated. If it is not, it will not give accurate readings.

If the above steps don’t resolve your problem, then it might be time to contact the manufacturer for assistance.

What To Do If Your Boblov Rangefinder Not Working

If your Boblov rangefinder not working, there are several things you should try before calling a professional repair shop.

• First, make sure the batteries are fully charged.
• Second, try turning off and back on again.
• Third, remove and reattach the battery cover.
• Fourth, press down firmly on the power button until the indicator light turns green.
• Finally, turn the unit over and shake it vigorously.

If none of those solutions works, then you’ll probably need to get a replacement rangefinder.

There are plenty of options available online, but if you don’t feel comfortable doing that yourself, then you might consider hiring someone who specializes in fixing golf equipment  and call a professional repair shop.

Final Thoughts

If you came looking for how to fix golf rangefinder, you have the answer. Besides that, I also included some bonus tips.

After reading this, you should now know how to keep a golf rangefinder steady plus notes on Bushnell rangefinder repair.

For more info, visit us more often. I still got more tips under my sleeves.

More Information

Golf rangefinder - related articles.

How to Use a Golf Rangefinder – All You Need to Know

How to Clean a Golf Rangefinder? Required for Avid Golfers

Can You Use a Golf Rangefinder for Hunting? Golfing vs Hunting

What Is Slope in Golf Rangefinder?

Can You Use a Rangefinder in a Golf Tournament?

Check-out our product reviews & recommendations.

Last Updated on December 4, 2023 by Paul Roger Steinberg

• Bushnell Manuals
• Measuring Instruments
• Instructions

Bushnell TOUR V3 Instructions

• User manual
• page of 2 Go / 2

Advertisement

Quick Links

Related manuals for bushnell tour v3.

Summary of Contents for Bushnell TOUR V3

• Page 1 Method 2 (a better alternative): We’ve drawn black oval (see all pictures below) on the optimal spot at the laser lens end on a Bushnell V3 (or V2) where you would need to place our belt clip tab/3M adhesive disk assembly. You would do the same for any of the other Bushnell Lasers as well as many other brands and models of laser rangefinders.
• Page 2 BUSHNELL TOUR V2 SHOWING PLACEMENT OF THE BELT CLIP TAB/3M ADHESIVE DISK ASSEMBLY ON THE LASER LENS END OF THE V2 BELT CLIP TAB/TRIPOD SOCKET SCREW ASSEMBLIES-3 VIEWS...

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

Bushnell TOUR V3 manual

manual Bushnell TOUR V3

View the manual for the Bushnell TOUR V3 here, for free. This manual comes under the category rangefinders and has been rated by 21 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Bushnell TOUR V3 or do you need help?  Ask your question here

Do you have a question about the Bushnell and is the answer not in the manual?

• Receive updates on solutions
• Get answers to your question

Question and answer

My Tour v3 rangefinder does not display the distance in meters, it shows the circle and the flag but does not measure, it's as if the laser doesn't work. What can I do?

I have debris on the lenses of my Tour V3. I cleaned the lenses on the outside but the debris seem to be on the inside. Now what?

To remove debris from the lenses of your Bushnell TOUR V3 rangefinder, follow these steps: 1. Make sure that the unit is turned off. 2. Use a soft, lint-free cloth to gently clean the lenses on the outside. 3. If the debris is still present on the inside of the lenses, it is recommended to contact customer service for further assistance.

It stopped working. I bought a new battery and it still doesn't work. At one point, it started vibrating and the letter M was flashing, but then it stopped vibrating and I can't get it to work. I'm not sure if it's the battery because it's new or if it's a problem with the device.

Bushnell Tour V3 I can't measure anymore, setting it to meters no longer works. When turning it on, you can still see Ym and it stays that way. What should I do? Best regards, Marek.

Hello, since my last stay in Morocco, the display is in yards. How can I switch back to displaying in meters? Thank you in advance for your answer. J Huguen

I can no longer set it to meters, when turned on it still shows "Ym" and then automatically switches to "y" and stays there. What should I do? Best regards, Werner Swaczyna

"I have changed the battery and now it shows 1888 ym and some other things. How do I get it to measure meters? When I hold down, it blinks m 3 times and switches to y 3 times but then it's back to 1888 ym again! Thankful for a quick answer!"

Same problem as already listed below. I can no longer set it to meters, when turned on it still shows Ym, then it automatically switches to y and stays there. What should I do?

The Bushnell Tour V3 range finder is a handheld optical device designed for golfers to accurately measure distances on the course. With 5x magnification and a 24mm objective diameter, it provides clear visuals for targeting objects at various distances. Featuring an exit pupil of 4.8mm and an eye relief of 21mm, the range finder ensures a comfortable viewing experience for users. It utilizes a Class 1 laser for precise distance calculations and displays the information on its LCD screen. In terms of physical dimensions, the range finder measures approximately 109.22 x 40.64 x 71.12 millimeters, making it compact and easy to carry around the golf course. It weighs 187.107 grams, which adds to its portability. The Bushnell Tour V3 range finder is powered by a single 3V battery and supports only one battery at a time. This efficient power system ensures that golfers can rely on its functionality throughout their play. Although the product specifications are mentioned, it is important to note that the overall performance and quality cannot be determined based solely on these factors. The objective description focuses on the physical attributes and features of the Bushnell Tour V3 range finder, providing potential customers with an understanding of its design and technical specifications.

Technical details

Weight & dimensions.

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bushnell TOUR V3 below.

What is the weight of the Bushnell TOUR V3?

The Bushnell TOUR V3 has a weight of 187.107 g.

How do I align the crosshairs of my Bushnell TOUR V3 range finder?

To align the crosshairs, simply press and hold the power button until you see the target image, then adjust the eyepiece until the crosshairs are sharp and clear.

How can I change the unit of measurement on my Bushnell TOUR V3?

To change the unit of measurement, press and hold the power button and the mode button simultaneously. Then, use the mode button to cycle through the different unit options and select your preferred one.

What should I do if my Bushnell TOUR V3 shows a "Battery" icon?

If the "Battery" icon appears, it means your device needs new batteries. Replace the old batteries with fresh ones, ensuring they are correctly installed, and you'll be ready to go.

Can I adjust the brightness settings on my Bushnell TOUR V3?

Yes, you can adjust the brightness of the display. Press and hold the power button, then use the mode button to adjust the brightness level to your liking. Release the power button to save your selection.

How can I activate the PinSeeker mode on my Bushnell TOUR V3?

Activate the PinSeeker mode by pressing and releasing the power button quickly. This functionality helps you lock onto the flagstick, even if there are other objects in the background.

What is the magnification of Bushnell TOUR V3?

5x magnification. This means that objects will appear 5 times closer than they actually are, allowing for more accurate distance measurements.

What is the objective diameter of Bushnell TOUR V3?

24 mm. This indicates the size of the front lens, which affects the amount of light entering the device. A larger objective diameter generally results in brighter and clearer images.

What is the exit pupil of Bushnell TOUR V3?

4.8 mm. The exit pupil is the diameter of the beam of light exiting the eyepiece. A larger exit pupil allows for a brighter image, particularly in low-light conditions.

What is the eye relief of Bushnell TOUR V3?

21 mm. Eye relief refers to the distance between the eyepiece and your eye. A longer eye relief is beneficial for those who wear eyeglasses, as it allows for comfortable viewing without having to remove glasses.

How many batteries does Bushnell TOUR V3 support?

1 battery. The fact that it only requires one battery makes it convenient and easy to power the device.

Is the manual of the Bushnell TOUR V3 available in English?

Yes, the manual of the Bushnell TOUR V3 is available in English .

Is your question not listed? Ask your question here

Bushnell TOUR V3 SLOPE

Bushnell Tour Z6

Bushnell Prime 1300

Bushnell Pro X2

Bushnell Prime 1700

Bushnell Hybrid 201325EU

Bushnell Pro 1M

Bushnell Pro 1600 Tournament

Bushnell Nitro 1800

Bushnell Broadhead

Bushnell TOUR V3 manual

user manual Bushnell TOUR V3

View the manual for the Bushnell TOUR V3 here, for free. This manual comes under the category rangefinders and has been rated by 21 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Bushnell TOUR V3 or do you need help?  Ask your question here

Do you have a question about the Bushnell and is the answer not in the manual?

• Receive updates on solutions
• Get answers to your question

Question and answer

My Tour V3 rangefinder does not show me the meters, it displays the circle and the flag but does not measure, it's as if the laser is not functioning. What can I do?

I have debris on the lenses of my Tour V3. I cleaned the lenses on the outside but the debris seems to be on the inside. Now what?

The Bushnell TOUR V3 rangefinder stopped working, I bought a new battery and it still doesn't work. At one point, it started vibrating and the letter M was blinking, but then it stopped vibrating and I can't get it to work. I'm not sure if it's the battery because it's new or if it's a problem with the device.

Bushnell Tour v3 I can no longer measure, setting it to meters is no longer working. When turned on, Ym still appears and stays that way. What should I do? Best regards, Marek.

Hello, since my last trip to Morocco, the display is in yards. How can I switch back to displaying meters? Thank you in advance for your response. J Huguen

"I can no longer adjust to meters, when turning on it still shows Ym, after that it automtically switches to Y and remains. What can be done? Kind regards, Werner Swaczyna"

I have changed the battery and now it shows 1888 ym and some other things. How do I make it measure in meters? When I hold it down, it blinks with "m" three times before switching to "y" three times, but then it shows 1888 ym again! Grateful for a quick response!

Same problem as listed below. I can no longer set it to metres, when turning it on it still shows Ym but then automatically switches to y and remains. What should I do?

The Bushnell TOUR V3 range finder is a compact and lightweight device designed to improve golfers' accuracy on the course. It has a magnification of 5x and an objective diameter of 24 millimeters, producing a bright and clear image. The exit pupil is 4.8 millimeters, and the device's eye relief is 21 millimeters, making it comfortable to use for extended periods. The Bushnell TOUR V3 range finder operates with a Class 1 laser and features an easy-to-read LCD display, making it simple to acquire distances to any target. The device measures 109.22 millimeters by 40.64 millimeters by 71.12 millimeters and weighs just under 200 grams. This range finder needs a single 3V battery to power it and has various power-saving features to preserve battery life. Its compact size and location assist technology make it an ideal choice for golfers looking to improve their game. In summary, the Bushnell TOUR V3 range finder is a reliable and user-friendly golf accessory that delivers quick and accurate distance measurements. It's lightweight, compact, and features advanced technology that makes it easy for golfers to focus on their game. Additionally, this range finder is constructed using high-quality materials that add to its durability and reliability over time.

Technical details

Weight & dimensions.

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Bushnell TOUR V3 below.

What is the weight of the Bushnell TOUR V3?

The Bushnell TOUR V3 has a weight of 187.107 g.

Is the manual of the Bushnell TOUR V3 available in English?

Yes, the manual of the Bushnell TOUR V3 is available in English .

Is your question not listed? Ask your question here

Bushnell TOUR V3 SLOPE

Bushnell Tour Z6

Bushnell Prime 1300

Bushnell Pro X2

Bushnell Hybrid 201325EU

Bushnell Prime 1700

Bushnell Pro 1M

Bushnell Nitro 1800

Bushnell Pro 1600 Tournament

Bushnell Broadhead

Bushnell Tour v3 JOLT

The Bushnell Tour v3 JOLT builds upon the prior generation Bushnell Tour V2 , with the same magnification (5x), range performance (5-1000 yards), and accuracy (to within 1 yard). The Tour v3 introduces Bushnell’s JOLT technology, which provides short bursts of vibration to indicate that its PinSeeker technology has locked onto a target. The JOLT technology may not be for everyone, but if you don’t like it, you can turn it off – we found ourselves appreciating it more over time. We do note that the Tour v3 does not always indicate that it has locked onto the target (via icon of a circle surrounding the flagstick in the display) even when it is returning the correct distances, and if the device hasn’t determined that it is locked on, there will be no accompanying vibration. As a result, it became clear that we didn’t absolutely have to have indication that the laser was locked onto a target – if the distance appears accurate, it probably is.

When you fire the laser, the distances will intermittently update as you pan across objects. We found that the laser can continue to fire in the range of 3-5 seconds before it locks onto a target, after which the yardage will continue to display for 15 seconds after the firing button is released. Distances to additional targets can be obtained even after PinSeeker has locked onto a target if you continue to pan.

The Bushnell Tour v3 JOLT is a solid device and at $299, is $100 less than the Bushnell Tour V2 and one of the least expensive golf laser devices tested. It provides quick and accurate readings even without verification, which was OK with us. But if you are keen on the PinSeeker and JOLT functionality, just realize that you may not get feedback with every reading.

• Reasonable price
• It vibrated!
• Only 5x magnification
• JOLT technology provides the same information as the PinSeeker icon in the display, so it’s more of an augmentation than a separate feature

Retail: $299 Availability: Discontinued. Replaced by the Bushnell Tour V4 Amazon.com: Check price now

Editor’s note: Consumers who like the sound (er, JOLT) of the Bushnell Tour v3 but want to add slope-adjusted distance information should check out the Bushnell Tour v3 Slope .

EASE OF USE

The Bushnell Tour v3 JOLT is a vertically held rangefinder measuring 4.3″ x 2.8″ x 1.6″, which is about average in size within its class. Its weight (as tested) was 7.4 ounces without the carry case, putting it on par with other vertically held rangefinders, and 10.4 ounces with the carrying case.

The device keeps true to the latest color scheme of Bushnell laser rangefinders, featuring a primarily white plastic body with black plastic accents and rubber in the grip areas.

The grey nylon carrying case is firm but not solid, providing adequate protection for the Bushnell Tour v3 JOLT. The zippered case is primarily grey, with black and red highlights. The case opens to about 35 degrees, with netting at the sides that does a nice job of preventing the rangefinder from falling out if you elect to leave the case open for easy access during a round. The Tour v3 JOLT easily slides in and out of the case, and the case can be attached to a bag or cart with the attached elastic loop or black carabiner. A small dust cloth is included for wiping the lens clean.

There is only one button on the Bushnell Tour v3 JOLT, the power/laser button, which is located on the top of the device. This button not only powers the device on and off and fires the laser, but is also used to adjust settings (switching between yards and meters and turn the JOLT feature on and off) if the button is held down when powering up (see below). There is no ability to change the cross-hair style.

As with most laser rangefinders, pressing the power/laser button turns on the device, and then pressing the button a second time will begin firing the laser and returning distances. The Bushnell Tour v3 JOLT displays the line-of-sight distance below the aiming circle, which has cross-hairs surrounding it when the laser is being fired. To the left of the distance reading is a flagstick icon that is part of the PinSeeker indicator – when the device has locked on to a target (which does not have to be a flagstick), a circle will surround the icon. When the player releases the power/laser button, the line-of-sight distance will continue to be shown for approximately 15 seconds. The aiming circle, cross-hairs, and distance information are presented in black, as the v3 lacks Bushnell’s “Vivid Display Technology.” Using an LCD display with distances and slope information in black can make information potentially more difficult to see against dark backgrounds. The Bushnell Tour v3 offers only 5x magnification, which is at the low end of among the laser rangefinders we have tested.

The Tour v3 JOLT has an adjustable eyepiece (+/- 2 diopter adjustment) that requires a firm twist to adjust. While it’s possible to adjust the eyepiece with one hand while looking through the viewfinder, most people will find it easier to hold the device with one hand and adjust with the other. Unlike the high-end Bushnell golf laser rangefinders, the eyepiece does not twist “up”, which is used by some laser rangefinders such as the Bushnell Pro 1M to shield off extraneous light.

The Bushnell Tour v3 JOLT uses a single CR-2 3-volt lithium battery that inserts through a twist cap on the right of the device. Bushnell recommends replacing the battery once every twelve months.

For more details, check out the Critical Golf comparison of laser rangefinder ease of use .

The Bushnell Tour v3’s always-on PinSeeker mode is prevalent in the Bushnell line and most competing products have a similar feature, all with the goal of locking onto the closest target within a line of sight, which under most circumstances is a flagstick against a background of trees or hills. PinSeeker works as well as it has on the Bushnell devices we have used in the past, which is to say that it is generally quite good, but not infallible. Occasionally the Tour v3 will lock onto objects behind the pin. It doesn’t happen often enough to give us any pause in recommending the device, and in the cases where it would initially provide distances to the background object (which is generally pretty obvious), a quick re-fire usually righted this wrong. “PinSeeker” is a bit of a misnomer, as it can provide locked-on distances to any target – trees, bunker faces, mounds, the group in front of you that you are considering driving into…

If a circle is not shown around the flagstick icon within the display, the device may still be providing the distance to the appropriate target, but for whatever reason is still sensing multiple objects in its path. We experienced this situation fairly frequently, and although there was no indication that the device has locked on to the target, it would still return the correct distance. It is difficult to say exactly when the Bushnell Tour v3 JOLT will “lock” onto a target and display the circle around the flagstick icon (indicating PinSeeker has found a target). Curiously, the device will often allow players to continue panning across targets (even after it JOLTS and displays the PinSeeker icon) for a range of 4-10 seconds

Lastly, let’s talk about the newest and most heavily-marketed feature of the Bushnell Tour v3: Bushnell’s JOLT technology. While most laser rangefinders provide some indication that the device has locked onto a target through either through some icon on the display and/or a beep or a tone, the Bushnell Tour v3 is the first device that adds haptics to a laser rangefinder. We weren’t enamored at first and looked for a setting that would enable us to turn the pulsing vibrations off (and while the manual indicates you can turn off JOLT, we aren’t able to do so on our device); however, over time we grew to appreciate the additional validation of locking onto a target. Some players will like the feature while others are satisfied with just a visual indicator and will find the JOLT to be no more than a marketing gimmick. Interestingly, the JOLT functionality hasn’t raised the price from the prior generation device (see ‘Value’, below), so whether you like it or not, at least you aren’t paying more for this feature compared to last years’ device.

The Bushnell Tour v3 provides distance information in 1-yard increments. The displayed distances don’t blink when they are being refreshed, so there are times when you’re firing the laser that you may wonder if the device is doing anything. If you’re in doubt, just check if cross-hairs are shown around the center aiming circle – that’s the indicator that the laser is being fired.

While the 5x magnification is at the low end of device magnification (the majority of quality rangefinders now offer 6x magnification), it’s a tradeoff for significant cost savings.

Additionally, the device is rainproof and has coated optics that are intended to help whisk away the rain and dust.

For more details, check out the Critical Golf comparison of laser rangefinder features .

OBTAINING DISTANCE READINGS

Bushnell claims a range of 5 to 1,000 yards for the Bushnell Tour v3 under optimal conditions, and 300+ yards to a flag. The top-of-the-line laser rangefinders will reach farther distances, but we find that maximum range of a rangefinder is less important than the actual performance in picking up targets within its capabilities and the ability to precisely pick out pins in the 150-350 yard range.

Ease of Locking on a Target: The Bushnell Tour v3 did an admirable job of picking out targets. At 185 yards or less it was able to lock onto targets and give us a JOLT the vast majority of the time. The device started to struggle to lock on to targets beyond this range against difficult backgrounds, with increasing challenges at more than 200 yards. It is important to note that while the device did not necessarily lock on to the flagstick at farther distances (and thus did not provide the PinSeeker icon or accompanying JOLT), it still has the ability to return an accurate distance. If you’re holding down the laser button and the displayed yardage is no longer varying, the device is usually providing the distance to the desired target.

We found that the displayed yardages update at the same rate of speed regardless of the distance to the target. There may be a brief pause while it initially locks on to a target, but this can occur regardless of distance.

Speed Test: The Bushnell Tour v3 is as speedy as any laser rangefinder we’ve reviewed, recording one of the fastest times in our tests of locking onto multiple targets. Even with the always-on PinSeeker mode, we could quickly get distance readings and re-fire at additional targets. You can get accurate distances to points without the device needing to lock on and freeze at a distance reading, so you can pan among several targets without needing to re-fire the laser. In truth, however, we found it much faster to simply press the laser button again anytime we wanted distances to additional targets. We did observe some incorrect distances returned when alternating between bunker faces and other parts of the course, but these were relatively limited during our tests.

Check out our laser rangefinder speed test to see how the Bushnell Tour v3 Slope compares against the best laser rangefinders.

At only $299 retail, the Bushnell Tour v3 JOLT is one of the most reasonably priced laser rangefinders on the market, and even carries a 2-year warranty. While it has slightly less magnification than most of the competition and lacks bells and whistles such as OLED displays and the slope-adjusted distance information, it still offers compelling value. It has a sporty look, Bushnell’s PinSeeker technology, and if you are into things that vibrate, you’ll dig it even more.

“It vibrated!”

6 Responses

The Bushnell works great I use it every time I golf….Thanks for this nice website.

the jolt feature is currently not working on my Tour V3 Can this be fixed.

Jolt does not work on tour v3. What’s the fix?

jolt does not work on my tour v3. what is the fix?

For those that say the jolt is not working press and hold the power button 10 seconds, look into the viewer and see the options scrolling by jolt with yards, yards only. jolt with meters and meters only

my battery only lasts about 2 months

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Rangefinders
• Accessories
• All Reviews

Quick Links

• How We Test

Announcement

Bushnell Tour v3 Laser Rangefinder issues

• Latest Activity
• Time All Time Today Last Week Last Month
• Show All Discussions only Photos only Videos only Links only Polls only Events only
• Join Date: Jul 30, 2011
• Location: Breslau
• Occupation: Software Engineer

• Join Date: Sep 6, 2005
• Posts: 8901
• Location: KW/Collingwood, ON
• Occupation: Professional Golfer

• Join Date: Aug 16, 2005
• Posts: 22867
• Location: Ottawa
• Occupation: Rocket Surgeon

• Join Date: Apr 23, 2011
• Posts: 1267

• Join Date: Oct 1, 2013
• Location: Mississauga, Ontario

• Join Date: Jul 24, 2009
• Posts: 16570

• Join Date: Aug 1, 2013
• Location: Markham
• Occupation: Retired

Latest TGN Reviews

Receive email offers from tgn, pga leaderboard, today's birthdays.

• Redtailhawk
• BradfordHighlands
• The Golfing Italian

Bushnell Tour V3 JOLT Laser Rangefinder Review

Table of Contents

A quick summary of the bushnell tour v3 jolt laser rangefinder, pros and cons of the bushnell tour v3 jolt rangefinder, is the battery rechargeable how many rounds per charge, does it give measurement in meters, can it be used on a driving range to determine exact length of each club distance, will it tell me how far to a bunker, is it waterproof, does this show the slope distance as well, does this come with a case, i primarily walk when i play. is is easy to attach to the bag and get in the way i don't want it bouncing it off my legs., can it be used for hunting, final verdict.

The Bushnell Tour v3 JOLT is a solid golf rangefinder with the ability to provide quick and accurate readings (10-1000 yards), acceptable magnification (5x), and ability to be accurate to within 1-yard.

Bushnell’s latest generation of laser rangefinder introduces the JOLT technology, which is appreciated for its ability to provide a short burst of vibration to let the user know the PinSeeker technology has locked onto a specific object.

The JOLT technology can be switched off by those who prefer not to use it.

Once the laser is fired, the distance to course objects will intermittently update as the  rangefinder  is panned across the landscape.

In the process of finding the course objects the laser can fire every 3-5 seconds until a specific target is locked in.

Even though the Bushnell Tour v2 was an outstanding laser rangefinder, the latest Tour v3 JOLT includes new technology, while also improving on the look and feel of the unit.

Important Features of the Bushnell Tour V3 JOLT

There are several selling points that can attract you to the Bushnell Tour v3 with the JOLT technology great for those players that weren’t always 100% sure the laser had locked onto the flag or other target. Plus, the PinSeeker technology has seen a slight improvement in performance.

Let’s look at the major features of this rangefinder:

• Range finding performance 10-1000-yards; up to 300-yards to flag (accuracy within 1-yard)
• 5x Magnification
• Single hand vertical operation; easy to grip
• Compact ergonomically designed
• Pin Seeker Technology
• Approved for tournament play
• Water-repellent construction
• Premium carry case and 3-v battery included
• 2-year warranty

The Bushnell Tour v3 Rangefinder is a favorite with recreational to  tournament golfers for its long list of exciting features that make it a pleasure to use.

• Ease of use is a key requirement when using a rangefinder and the Bushnell Tour v3 is certainly able to meet this need. It is fast to operate: On and lasering targets in a matter of seconds.
• It has the ability to pinpoint the distance to many different objects on the golfing landscape (water hazards, sand pits, trees, etc.), and not just the flags.
• The overall range of the Bushnell Tour v3 is a reliable 10 to 1000-yards, which makes it possible to identify objects from distance. Plus, for ease of use the unit gives the option to read data in both meters and yards.
• The PinSeeker Technology on the rangefinder is highly precise at picking out the flag without targeting other objects on the course. You can get an accurate detection of the flag from within a distance of 300-yards.
• JOLT technology: the Tour v3 combines the PinSeeker Technology with the JOLT technology to simplify the function of the rangefinder. This cool extra feature emits a mild vibration when the unit locks onto a target and has the ability to enhance the performance of this unit for many golfers. But for those users that believe it could detract from the intended usage, it is possible to deactivate the buzz.

• The Bushnell Tour v3 is a speedy unit for locking onto multiple targets. So, accurate readings are only seconds away if you are looking to get the distance to a flag, bunker face, or other object on the course.
• For better handling of this laser rangefinder (LFR) the case design has received an update to give a more precise fit when held in the hand during use. Plus the rubber armoring makes is easy to grip even when the hands are wet or slippery .
• The Tour v3 is fully legal for players of tournament games and a reliable option to post scores for handicap purposes.
• The Bushnell Tour v3 has experienced cosmetic improvements compared to the V2 unit. Its color scheme is more distinctive in white/black/red (similar to other Bushnell lasers like the Tour Z6 and Pro 1M) which is an instant update to the previous models black and gray look.
• The premium carrying case for the Tour v3 has received an upgrade with a zipper and bungee closure installed in place of the previous magnetic closure. While this isn’t a major change, it is still appreciated and provides a more reliable solution to keep the case closed while on the golf course. Plus, magnets don’t always go well with electronics.
• The Bushnell Tour v3 JOLT has slightly less magnification than some of the comparable competition at a similar price range.
• The standard edition of the Tour v3 doesn’t come with the ability to read slope-adjusted distance data (it is possible to include this information on the Bushnell Tour v3 Slope unit).
• This rangefinder isn’t designed with an OLED display, which makes reading the on screen data easier in low-light conditions.

Frequently Asked Questions (FAQ)

Battey is not rechargable, and should last about 4-6 months with decent amount of use.

Yes, you can change it between meters and yards.

It needs a target to bounce the signal off of, like the pin flag. So if your ball lands near a target you could get a reading. I'll measure my drive distance by shooting back at the tee markers from where my drive landed.

Yes. If you can see the front or back of the bunker, you can shoot it or any other object you can see.

It's weather- resistant. Not necessarily waterproof. Users have reported using it in the rain several times with no issues. Battery compartment is sealed off well.

This is the standard no slope edition. Check out Bushnell Tour v3 Slope.

Yes, it does. It is equipped with a clip so you can hang it on your bag or tuck it inside the appropriate pocket.

Yes. The case has a clip that you can attach to the top hook on your bag and you never feel it's there. The device is also small enough so that you can carry it in your pocket.

I don't see why not. As long as you can get a lock on it.

If you’re searching for a high-quality LRF that you can trust, the Bushnell Tour v3 is certain to be a popular choice. It has great accuracy at + or – 1 yard, has a sporty look, and is easy to use when targeting the golf landscape.

People call my game aggressive. But it's just the confidence that comes from preparation. Bushnell is indispensable in that regard."

Also, the Tour v3 laser rangefinder has witnessed an upgrade on earlier editions with its excellent PinSeeker technology getting a much appreciated enhancement with the addition of the JOLT technology.

The price point for the Bushnell Tour v3 is excellent compared to other rangefinders with similar features. While the price isn’t inexpensive, it is certain to be seen as competitive.

Denny Putsh

With over 25 years experience in the world of golf, I've dedicated a significant portion of my life to appreciating this sport. From my early days swinging a club at 12 years old to now, my passion has only grown. While I avidly follow the PGA Tour, what truly captivates me is the evolution of golf equipment and technology. Over the years, I've familiarized myself with the latest gadgets, training aids, and golf accessories that enhance the golfing experience. My mission is to share this knowledge and enthusiasm with fellow golf aficionados, ensuring they have access to the best insights and recommendations. Whether you're a beginner or a seasoned pro, I'm here to guide you through the dynamic world of golf innovation.

Modern Golf Apparel

Get an extra 10% off your order when you use the code  HTGB

• Sports & Outdoors
• Accessories
• Rangefinders

No featured offers available

• Quality Price,
• Reliable delivery option, and
• Seller who offers good customer service

Image Unavailable

• To view this video download Flash Player

Bushnell Tour v3 Slope Laser Rangefinder

About this item.

• Single hand vertical operation with 5x magnification and a 24mm objective
• Range finding performance of 10 to 1,000 yards; 300 yards to flag with +/- one yard of accuracy
• Pin Seeker Technology with Jolt Vibration activated when Pin Seeker is triggered; SCAN mode provides continuously updated LCD display as you pan across landscape
• Slope compensation calculates and adjusts swing yardage depending on the degree of the slope
• Compact ergonomical design that is easy to grip; includes a carrying case and 3-volt battery; 2-year warranty
• Class 1 laser with <0.5mW average power output

There is a newer model of this item:

Similar items that may ship from close to you

Top Brand: Bushnell

Product description.

Bushnell Tour v3 Slope Laser Rangefinder The Bushnell Tour v3 Slope Laser Rangefinder features PinSeeker with JOLT technology which provides the golfer short vibrating bursts to confirm PinSeeker is activated and the laser is locked onto the flag. The v3 Slope sets a new standard in the complete laser rangefinder package - look, feel, and performance. Bushnell's patented Slope Technology provides the golfer with compensated distance based on hole's incline or decline, so never fall short again. Slope measures slope, +/-1 deg of angle, and compensated range, based upon ball trajectory and type of club used. All shown on an LCD display. A 150-yard uphill shot of 6 deg really plays at 166 yards. Without slope compensation, you would come up 16 yards short. Additional features: Five-times magnification Ranges 5-1,000 yards/meters; 300+ yards to flag yards/meters New ergonomic design with stable rubber grip Accuracy to within one yard Not legal for tournament play Two-year warranty

Product information

Technical details, additional information, videos for this product.

Click to play video

Bushnell Tour V3 Slope Edition Golf Laser Rangefinder, White

Merchant Video

Bushnell Pro X7 Slope Golf Laser Rangefinder with JOLT

Manufacturer ASINAmazon Video

Bushnell Golf Hybrid Laser Rangefinder and GPS Unit

Looking for specific info, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the slope feature, accuracy, and compactness of the rangefinder. For example, they mention it's easy to use, provides very accurate yardage, and serves the purpose. Some appreciate the detection speed, saying it'll pick up the target almost instantly. That said, opinions are mixed on value.

AI-generated from the text of customer reviews

Customers like the quality of the rangefinder. They say it's an excellent device, simple to use, and serves its purpose. Some say it outperforms other range finders on the course and is awesome for practice rounds.

"...Re-cap. Excellent device . Couldn't be easier to use or quicker to display. Jolt indication worth buying the V3 product over the V2...." Read more

"...This unit is accurate, simple to use, and serve the purpose . It acquires the target quite easily. The reading looks a little primitive...." Read more

"...It fits in your hand well, the carrying case is sturdy (zips close and elastic band) and is just so easy to use. Just be sure to keep the lens clean...." Read more

"...an phone app or a scope, I'd say this scope is far more accurate and reliable .Downside - You can't get a read if the pin isn't visible...." Read more

Customers are satisfied with the accuracy of the rangefinder. They mention that it works perfectly, gives very accurate yardage, and brings even more accuracy to their game.

"...This unit is accurate , simple to use, and serve the purpose. It acquires the target quite easily. The reading looks a little primitive...." Read more

"...debating using an phone app or a scope, I'd say this scope is far more accurate and reliable...." Read more

"... Very accurate if you can lock on target with proper useCons:..." Read more

"...on the topography of the course made it a real advantage and extremely accurate . I ordered it and got it just a few days later...." Read more

Customers find the rangefinder easy to use and amazing. They say it's easy to focus, read, and enlightening to use.

"...I've never used a golf laser finder. The ease and speed of use is amazing . It finds all targets easily and displays results instantly...." Read more

"...This unit is accurate, simple to use , and serve the purpose. It acquires the target quite easily. The reading looks a little primitive...." Read more

"...carrying case is sturdy (zips close and elastic band) and is just so easy to use . Just be sure to keep the lens clean...." Read more

"...are very good, and the range information displayed on the LCD is easy to read ...." Read more

Customers find the slope feature of the rangefinder helpful, amazing, and cool. They say the slope calculation is pretty cool and helps them dial in their clubs.

"...The Slope Edition is very helpful because it calculates the difference in elevation and gives you both actual yardage and adjusted yardage through..." Read more

"...I find the slope adjusted range feature very helpful , and indeed I always look to that and compare it to the primary display...." Read more

"...Not a huge drawback in my opinion.The slope feature is a cool addition , however, I don't think its entirely game changing." Read more

"...Easy to focus and easy to read and the slope element is cool !Not sure how many strokes it will take off my game! Ha!..." Read more

Customers are satisfied with the rangefinder's detection. They mention that it is fast at picking up the target, much faster than their GPS app, and provides almost instant target acquisition and very fast distance readings. It speed up play and provides exact distance in a matter of seconds. It also responds very quickly with precisely figures.

"...It finds all targets easily and displays results instantly . The 5x brings distant targets into easy site range...." Read more

"...It acquires the target quite easily . The reading looks a little primitive...." Read more

"...I know I am taking less time for club selection, the V3 is quick to give me a distance and there is no thinking about or changing clubs prior to my..." Read more

"Can't go wrong with this Laser. Almost instant target acquisition and very fast distance readings...." Read more

Customers like the vibration feature of the rangefinder. They say the jolt technology is very helpful, and the vibration confirmation is a plus. They also say the technology removes any doubt that the ranger has locked on to the flag.

"...It was very easy to use and the jolt technology to confirm lock on flag comes in very handy...." Read more

"...The jolt technology gives you instant feedback to let you know you are locked on to the flag, giving you confidence that you have the right distance..." Read more

"Very accurate & easy to use. Jolt technology removes any doubt of if your on the pin or not...." Read more

"...This may be why some think the pin seeker / jolt doesn't work all the time . Reading the instructions may help...." Read more

Customers find the rangefinder compact, easy to use, and light. They say it fits right into their hand and is accurate. Some say it's the same size as the original rangefinder and that it gets their measurements on the first try.

"...I wear glasses and have no problems using the device. It fits in your hand well , the carrying case is sturdy (zips close and elastic band) and is..." Read more

"...It is small , lightweight, and simple to use...." Read more

"...Pros:Easy to use and light Fits right into your hand One hand operation is possible as long as you hold it steady..." Read more

" Nice compact range finder . The slope is a nice feature but if you play a lot of golf it is not really needed...." Read more

Customers are mixed about the value of the rangefinder. Some mention it's worth the price, works great, and is a brilliant buy, while others say it'd be better off with a different rangefinder and a cheaper yearly fee.

"...Quick and easy to use. Exactly what I was looking for. Priced right . Case is well designed to hook on golf bag." Read more

"...mind that it's not "competition approved" but the cost difference is quite a bit and most of the time I could guesstimate what kind of..." Read more

"Love it. Worth the price . I tried another brand at half the price...." Read more

"...Could improve your score by 2 to 5 shots. A little pricey but a good unit." Read more

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

Troubleshooting Guide: Resolving Bushnell Tour V4 Rangefinder Stuck in Setup Mode

The Bushnell Tour V4 rangefinder is a golfer’s trusted companion on the course, providing accurate distance readings for precision shots. However, encountering setup mode issues can be frustrating and may hinder your golfing experience.

In this comprehensive guide, we will walk you through the steps to troubleshoot and resolve the “stuck in setup mode” problem. From understanding the issue to performing a factory reset and seeking customer support, we’ve got you covered. Let’s get your Bushnell Tour V4 back in action for a seamless golfing experience.

What is Setup Mode and Why Does it Occur?

The setup mode is a critical part of the rangefinder’s functionality, enabling you to customize settings to suit your preferences. However, there are instances when the rangefinder gets stuck in this mode, preventing proper operation. Several factors can contribute to this, including software glitches or user errors.

When your Bushnell Tour V4 is stuck in setup mode, it can be disruptive to your golfing rhythm. You won’t be able to access accurate distance readings, leading to uncertainty in shot selection and overall performance on the course.

How to fix the issue DIY?

II. Performing a Factory Reset

A factory reset is a powerful troubleshooting tool that can resolve software-related issues and revert your rangefinder to its default settings. This can eliminate any software glitches or user settings that might be causing the setup mode problem.

• Step-by-Step Guide to Resetting Your Rangefinder

Performing a factory reset is a straightforward process. Start by powering off the rangefinder, then press and hold the power button and the mode button simultaneously for three seconds. The rangefinder will reset, and the display will show the factory settings. After the reset, test your rangefinder to see if the issue has been resolved.

III. Checking and Replacing the Battery

A low battery can lead to unexpected malfunctions, including setup mode glitches. It is essential to ensure your rangefinder’s battery is in good health and has sufficient power to operate correctly.

• Step-by-Step Battery Replacement Process

If your battery is low or depleted, follow these steps to change it effectively: Remove the battery cap by lifting the battery cap tab and rotating it counter-clockwise. Remove the old battery and insert a new one with the correct polarity. Replace the battery cap and tighten it clockwise.

IV. Contacting Bushnell Customer Support

If you’ve tried the above steps and the rangefinder is still stuck in setup mode, don’t worry. Bushnell’s dedicated customer support team is ready to assist you with expert guidance and solutions.

• How to Reach Bushnell’s Support Team

Visit Bushnell’s customer support website at https://www.bushnellgolf.com/support/ to get in touch with their team via email, phone, or live chat. Provide them with details about the issue, and they will help you troubleshoot or arrange for a replacement if necessary.

V. Calibrating the Rangefinder

• Ensuring Accurate Distance Readings Proper calibration is essential for accurate distance readings. Calibrating your rangefinder will ensure that it is providing precise measurements on the course.
• Step-by-Step Calibration Process Calibration procedures may vary depending on the model of your Bushnell Tour V4 rangefinder. Refer to your rangefinder’s user manual for detailed instructions on calibration.

VI. Checking for Firmware Updates

• The Importance of Up-to-Date Firmware Firmware updates often include bug fixes and performance enhancements. Keeping your rangefinder’s firmware up-to-date can address known issues and improve overall performance.
• How to Check and Install Updates Visit the Bushnell website or use their software tool to check for available firmware updates for your specific rangefinder model. Follow the instructions to download and install the latest firmware.

VII. Verifying Lens and Sensor Integrity

• Ensuring Clear Optics and Precise Measurements Dust, dirt, or debris on the lens or sensor can negatively impact the rangefinder’s performance. Keeping these components clean and well-maintained is crucial for clear optics and precise measurements.
• Cleaning and Maintaining the Rangefinder Use a soft, lint-free cloth to clean the lens and sensors gently. Avoid using harsh chemicals or abrasive materials that could damage the rangefinder. Regularly clean and maintain your rangefinder to ensure consistent performance.

Bushnell Tour V5 Problems; Well Explained By Sportic Media sporticmedia.com

Bushnell tour v4 not vibrating; Causes and fixing

If your Bushnell Tour V4 rangefinder is not vibrating as it should, it can be frustrating and may impact your golf game. There are several potential causes for this issue; fortunately, some can be easily fixed.

• Low Battery : A low battery is one of the most common reasons for the lack of vibration. When the battery runs low, the rangefinder may not have enough power to activate the vibration feature. To fix this, replace the battery with a fresh one, and the vibration should resume.
• Vibration Setting Turned Off : It’s possible that the vibration setting has been inadvertently turned off. To check this, go into the rangefinder’s settings and ensure that the vibration feature is enabled.
• Dirt or Debris : Dust, dirt, or debris can sometimes accumulate around the vibration motor, preventing it from functioning correctly. Try cleaning the rangefinder using a soft, dry cloth, especially around the vibration motor area.
• Malfunctioning Vibration Motor : If the above steps do not solve the issue, there may be a problem with the vibration motor itself. In such cases, it is best to contact Bushnell customer support or take the rangefinder to an authorized service center for further inspection and repair.
• Firmware Issue: Sometimes , a glitch may cause the vibration feature to stop working. Check for any available firmware updates for your model on the Bushnell website and follow the instructions to update the device.

To ensure your Bushnell Tour V4 rangefinder functions optimally, regularly check the battery life and keep it clean from dirt and debris. If the problem persists despite trying these troubleshooting steps, seeking assistance from Bushnell customer support or an authorized repair center is the best course of action to get your rangefinder’s vibration feature back in action and ready to assist you on the golf course.

How do I change my Bushnell Tour v4 from meters to yards?

Changing your Bushnell Tour V4 rangefinder from meters to yards is a simple process that can be done using the Mode button. Here’s a step-by-step guide to help you make the switch:

• Power on the rangefinder: Press the power button to turn on the device.
• Enter Settings Mode : Press and hold the Mode button for a few seconds until the unit enters the Settings Mode. You will see the unit of measurement displayed on the screen.
• Switch to Yards : While in the Settings Mode, press the Mode button again to toggle between meters and yards. The unit of measurement will change accordingly on the screen.
• Confirm the selection : Once you have switched to yards, simply exit the Settings Mode by waiting for a few seconds or pressing the power button again.

Your Bushnell Tour V4 rangefinder should now be displaying distances in yards instead of meters. Remember, if you ever need to switch back to meters, you can follow the same steps and toggle the unit of measurement in the Settings Mode.

Can a Bushnell rangefinder be repaired?

Yes, Bushnell rangefinders can be repaired. If your Bushnell rangefinder is experiencing issues or malfunctions, you have options for repair. First, check if the rangefinder is still under warranty, as Bushnell often offers limited product warranties.

You can contact Bushnell customer support for assistance and potential repairs if it is within the warranty period. Additionally, even if the warranty has expired, you can still contact their customer support for guidance on repair services or authorized repair centers. With proper care and maintenance, Bushnell rangefinders can be repaired and continue to serve you on the golf course.

Bushnell Wingman Remote Not Working? Troubleshooting Tips to Get You Back on Course sporticmedia.com

Final Thoughts: Mastering Your Rangefinder

• Troubleshooting with Confidence Armed with the knowledge and skills gained from this guide, you can now confidently troubleshoot common issues with your Bushnell Tour V4 rangefinder.
• The Joy of Seamless Golfing With your rangefinder back in perfect working order, you can focus on your game, make precise shots, and enjoy a seamless and enhanced golfing experience.

The Bushnell Tour V4 rangefinder is a golfer’s best friend on the course, providing accurate distance readings for improved shots. However, encountering setup mode issues can occasionally happen. By following our comprehensive guide, you now possess the knowledge and skills to troubleshoot common problems and restore your rangefinder to peak performance. From performing a factory reset to calibrating and updating firmware, you can optimize your rangefinder’s functionality. Ensure clear optics and sensor integrity for precise measurements. With your rangefinder back on track, you can focus on your game and make precise shots with confidence. Elevate your golfing experience to new heights with a reliable and fully functional Bushnell Tour V4 rangefinder. Happy golfing!

Discover the meticulous and expert-driven process behind our product reviews at Sportic Media. Our comprehensive guide, led by industry veterans, ensures you get the most reliable and detailed insights into golf equipment. Dive into our methodical approach by visiting How We Test Products at Sportic Media: A Comprehensive Guide .

Willie Park is a golf writer and content manager at Sportic Media. He covers all aspects of the golf world, from tournament recaps to player profiles to equipment reviews. Willie brings years of experience in the golf industry to his writing, along with a passion for the game and its history. As content manager, Willie oversees Sportic Media's golf coverage, working with writers and editors to produce engaging and informative articles for golf fans everywhere. His mission is to share his love of the game through Sportic Media's high-quality golf journalism.

Similar Posts

60 vs 70 Gram Driver Shaft; All You Need to Know By Sportic Media

They are manipulating the swing if they are slowing down their swing. Swinging a 60 gr shaft with the same force as a 70 gr. shaft will cause the 60 gr. shaft to move more quickly. Longer and more reliable drives may result from a 70 gr, but that is due to consistency and efficiency,…

Do Puma Golf Shirts Run Big Or Small? Sharing My Own Experience

In my experience, Puma golf shirts have undergone a sizing transformation in recent seasons. If you’re wondering whether they tend to run big or small, you’re not alone. As someone who has worn Puma golf shirts for a while, I’ve observed these changes firsthand. Join me as I share my insights on how Puma’s sizing…

Super Stroke Putter Grip Size Chart; Everything You Need To Know

The SuperStroke Putter Grip Size Chart is a crucial tool for golfers looking to enhance their putting game. This guide provides insight into grip sizes (1.0, 2.0, and 3.0), helping you select the perfect fit based on hand size, putting stroke, and preference. Elevate your putting performance with the right SuperStroke grip size. What to…

Tour Velvet 360 vs Tour Velvet; Best Comparison Ever. 

What are the major differences between Tour velvet and Tour Velvet 360? Not the same grip, they are not. They feel and have a different texture. Personally, I feel that the pattern is sharper and more aggressive with the 360 grips if that makes sense. The 360 feels like it has more texture, while the…

SIM2 Max Driver Adjustment Chart; By Sportic Media

The SIM2 Max driver is a remarkable golfing technology with exceptional performance. Understanding and utilizing the driver’s adjustability features is crucial to unlocking its full potential.  In this article, we will delve into the world of driver adjustments and explore the Sim2 Max Driver Adjustment Chart, which guides optimizing your driver’s settings for improved distance,…

Callaway X Hot Driver Adjustment

The Callaway X Hot driver has garnered significant popularity among golfers of all skill levels for its exceptional performance and innovative technology. When it comes to optimizing your golf game, adjusting the driver to suit your swing characteristics becomes crucial.  In this article, we’ll delve into the world of Callaway X Hot driver adjustments, exploring…

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Pin It on Pinterest

• Remember me Not recommended on shared computers

Forgot your password?

• GPS/Range Finders/Mobile Apps

Bushnell Tour V5 Shift issues?

By kygolfer81 June 14, 2021 in GPS/Range Finders/Mobile Apps

• Reply to this topic
• Start new topic

Recommended Posts

Is it just me, or have Bushnell's gone waaaaaaay down hill?

Anyway, I'm on my second V5 Shift. The first one seemed find at the house after it was delivered. Get it on the course the very first time and it will not pick up a yardage to a flag. Just won't. Let a buddy try it a handful of times to make sure I'm not crazy and he can't get it to work. If there's a flag with trees in the background it picked up the trees every single time. I did get it work a couple times to a flag from around 100 yards, but that's it. Just got the replacement today so I'll see how it works to a flag this week sometime.

Anyway, the question at hand. Does anyone of the Tour V5 Shift and have the metallic rings inside optics holes on the front rotate? If you take your finger in there and move them around it's almost like they unscrew about a half a turn or so. They don't seem so loose that they want to come out or anything, just move about a half circle. Anyone else's do this? I assume it's fine either way and the device will work, but just seems sloppy.

Wish I had just went with something cheaper and still might. I can sell this one for what I paid and just get something like a Golf Buddy that will suffice and save my wallet.

Link to comment

Share on other sites.

• 7 months later...
• Created 2 yr
• Last Reply 1 yr

Top Posters In This Topic

Popular Days

Minarets 2 posts

kygolfer81 1 post

golfing_penguin 1 post

David dutton 1 post

Mar 22 2023

Popular Posts

March 22, 2023

My V5 Bite just stopped working.  The eyepiece no longer turns so you can't focus.  Of course it's 3 months outside of the 2 year warranty so I got the standard 20% off of your next purchase offer as

HappyGilmore22

March 20, 2023

Must be nice! Mine didn't work after playing 1 round. Didn't want to take the time to send it back in for about a year after the season because it was an annoyance to do what they wanted and didn't wa

Posted Images

I just got the range finder and it’s a complete pos. I cannot get the flag, like you said, with anything in the background and it’s actually giving me wrong yardages. It’s insane!! Going back to my v3. I’m sure I’ll be blamed for user error by Bushnell but I’ve been using bushnell rang finders for 15 years.

PING G425 9* Tour 65 X - PING G400 Stretch 13* HZRDUS Yellow - PING G425 17* Hybrid Tour 85 X PING I210 4-U Project X 6.5 - PING Glide 2.0 Stealth 55 & 60* Project X 6.0 PING VALOR CB 35"

• 2 weeks later...

MarkRingstead

I am also on my second v5 first one won't work after a couple of months, such as wrong yardages. I am having trouble with the second one. Seems to be it doesn't like cold weather!!! Struggles locking on to pin or anything for that matter when it's cold. I have to put it in my pocket for a few holes to warm it up. Shoddy at best from a once reputable brand.

• 4 months later...

teeithigh33

Late to this post, but waiting for mine to arrive. Hope it doesn't have any issues.

My shifts slope function broke as well they said they could give me 20% off any rangefinder. They also took five days to reply 😂  

MillionDollarVirus

My shift also had a malfunction ..the slope feature just stopped working..sent them an email from their site..they sent me a FedEx label and I sent it in..they determined it was their fault and they sent me a new one…pretty good service 

My son plays D1 golf and was given a Bushnell V5 when he arrived at school.  He had me bring him his old V3 as he had issues with the V5.  He swears the V3 is Bushnell’s best.  I’ve been getting along with an app, but miss the V3.

I have a Bushnell Pro X2 that won't pick up a flag either. I have a Leupold GX 2i3 that is even worse. Conversely, my several-years-old Costco Caddy Tek and a decade-old Nikon are both solid in this regard- always lock onto the flag the first time.

I'm in the market for a new rangefinder and it won't be a Bushnell or Leupold.

• 4 weeks later...

I have all the same issues.  At times it wont lock on to the flag at all.  and just yesterday I compared slope reading with a buddy range finder and my slope reading were off by double his in every situation.  Beyond disappointed in this product.  I need to contact Bushnell for sure.

David dutton

I have a bushnell tour x and it won’t zoom in on the flag it just stays with a rifle on the setting. It used to come up with a circle and a flag then vibrate when locked on. How can I get this to work again please ? 

I want an am willing to but the v5 shift as it checks all my pockets.  That said. Think I’m gonna go Tectectec klyr as it’s been given rave reviews and is sub $200.  

Driver: Callaway Paradym Triple Diamond 8*, Tensei AV White 75g Irons: TaylorMade P790, 5-PW; Mitsubishi MMT 110g Hybrids: Ping G425 19* Wedges: Ping Glide 3.0 50*, 54*, 60* Putter: L.A.B. Directed Force 2.1, Polar BGT shaft    Bag: Ping Hoofer Lite Midnight Ball: Bridgestone Tour B X yellow, Callaway Chrome Soft X LS

golfing_penguin

I've got the og Bushnell Tour X and while the case is showing it's age the unit itself is actually holding up fine (he says). I wonder if all the manufacturers have that dud series because they used it to experiment with the internal makings of the unit

On 6/10/2022 at 9:53 PM, NCDuffer said: My son plays D1 golf and was given a Bushnell V5 when he arrived at school.  He had me bring him his old V3 as he had issues with the V5.  He swears the V3 is Bushnell’s best.  I’ve been getting along with an app, but miss the V3.

I have a pair of V4's - one slope, one non-slope.  They replaced earlier model Bushnell's. Neither have given me any trouble. Fast, accurate (when compared to each other), and reliable. Plus, they were the last models to come with the "skin" covering accessory which aids weather resistance (though neither are rated waterproof).  They were both manufactured pre-Covid so I wonder if that matters (are newer models built in China)?  I treat mine fairly gently, but they're used quite often. Never stored in extreme temps or trunk for long periods.  I wonder how many complaints are from abusive users?  

Boricua Golf

Maybe was a bad batch, I have the V3 and V5, my V5 is in the bag currently, "knock on wood", it has performed perfectly for me, no issues at all...I know Bushnell has great customer service as well, I emailed a question and they replied and sent me 2 batteries and an additional divot tool, very cool from them, the question had nothing to do with the V5...

DRIVER: Callaway AI Smoke TD 10.5*, Ventus TR Blue 6TX at 45" 3 WOOD:   Callaway Paradym HL 16.5*, Diamana Flower Band White, D+ 82X Flex, tipped 1" at 42" 7 WOOD:   Callaway Paradym 21*, Tensei AV white 75g S Flex, tipped 1" at 41"

IRONS:   Callaway Apex MB 7-10, CB 4-6 -- DG TI S400

WEDGES:   Callaway JAWS Raw 50, 54, 58 -- DG TI S400 PUTTER:  SC Phantom 5, Stability Shaft, 33.25", Garsen Quad Tour grip (Toulon Chicago as back up) BALL:   Callaway CT X (current gamer), Srixon Diamond, -ProV1X and ProV1

Bushnell quality and CS has just pushed me away.  I moved to precision pro NX9 and then NX10.  No doubt the quality doesn’t feel as good in hand but they CS had been Johnny on the spot and made me feel much better about the products.   Just ordered a Tectectec klyr to see if the hype for such an inexpensive device can be as good.  

I was considering a V5 but think I’ll just stay with my V4. Touchwood it’s been bullet broof bar the battery bar not working properly - it’ll drop to two bars then suddenly just stop working after a month or two and need a new battery.

Titleist TSR2 10 set at 11 Hzrdus Red CB Titleist TSI2 16.5 Tensei Blue

Ping G 17.5 set at 18.5 Ping tour shaft. Titleist TS3 hybrid 21 Tensei Blue Taylormade 2023 p790 5-PW kbs tour lite Vokey SM9 50°/12° SM8 56°/14° and SM9 60°/10° Scotty Cameron Studio Select Newport two Taylormade TP5x [i]Remember there are no pictures on a scorecard, only a number. [/i]

• 2 months later...

On 6/10/2022 at 12:58 AM, MillionDollarVirus said: My shift also had a malfunction ..the slope feature just stopped working..sent them an email from their site..they sent me a FedEx label and I sent it in..they determined it was their fault and they sent me a new one…pretty good service 

Must be nice! Mine didn't work after playing 1 round. Didn't want to take the time to send it back in for about a year after the season because it was an annoyance to do what they wanted and didn't want to be without it for an unknown period of time. Regular setting worked fine for yardages but didn't have the pin seeker jolt working ever. Anyway they emailed me back saying the slope switch shorts out when flipped to it and doesn't work because it got wet. Well that's interesting because I never once had it in the rain when playing or had it by any water whatsoever. Their site also said it's supposedly water resistant. They won't do anything with it now but made sure to give me a 20% off coupon. Absolute trash customer service. I really liked the rangefinder and was excited to use it after waiting years to finally get one. Now I'm torn on ever wanting to support their company.

Titleist TSR3 8 deg - Fujikura Ventus TR Black 6X

Titleist TSi3 15 deg - Fujikura Ventus Black 8X

Titleist TSR3 19 deg - Fujikura Ventus Black HB 9TX

Titleist T200 4 - TT DG TI X100

Titleist T100 (2019) 5-PW - TT DG TI X100

Vokey SM10 Jet Black 50.12 F - TT DG TI X100

Vokey SM10 Jet Black 54.14 F - TT DG TI S400

Vokey SM10 Jet Black 58.08 M - TT DG TI S400

Scotty Cameron Phantom X 5.5

Titleist ProV1

My V5 Bite just stopped working.  The eyepiece no longer turns so you can't focus.  Of course it's 3 months outside of the 2 year warranty so I got the standard 20% off of your next purchase offer as well.  Thanks Bushnell, like I'm going to invest more money in your POS equipment that only lasts for two years.  Is anyone aware of some DIY information to try to fix this issue?

cmatthews77

I had a V5 with slope for a little while (left it magnet to cart) and now it’s gone. While mine worked fine I actually preferred the V3. It was easier to lock on pins for me. I thought it was because the V5 was a little too lightweight and I couldn’t hold it steady but maybe it just doesn’t lock on as well.   

My son who plays school golf has my V3 now so trying to decide on a new one or wait for V6. 

Callaway Epic Speed 9° Driver Callaway Epic Speed 4 W - Smoke IM10

Callaway Apex UW (21°)

Mizuno Pro 225 (4i); 223 (5-9i); 221 (PW) Jaws MD 5 50°, Full Toe 54°, 58° PM Grind Toulon Odyssey Chicago  

soregongolfer

Overall, my Tour V5 Shift has been very, very good.  There was a time when it didn't work.  I simply took the battery out and cleaned the leads with a Q-Tip and alcohol.  It worked flawlessly after that.  It's very quick in getting distances and the magnet is the best thing since sliced bread.  The battery lasted a full year or roughly 150 rounds. 

My only real gripe is the battery cover.  I knew I would eventually break it and I did exactly that when I replaced the battery day before yesterday.  I ordered a new one from Bushnell for $6.99 shipped.  The tab is very thin plastic.  I'd like to see it made out of aluminum.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply

Recently Browsing    0 members

• No registered users viewing this page.

2024 CJ Cup Byron Nelson - Discussion and Links to Photos

GolfWRX_Spotted posted a topic in Tour and Pre-Release Equipment , Monday at 07:57 PM

2024 Zurich Classic - Discussion and Links to Photos

GolfWRX_Spotted posted a topic in Tour and Pre-Release Equipment , April 22

2024 RBC Heritage - Discussion and Links to Photos

GolfWRX_Spotted posted a topic in Tour and Pre-Release Equipment , April 15

2024 Masters - Discussion and Links to Photos

GolfWRX_Spotted posted a topic in Tour and Pre-Release Equipment , April 10

Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open

atursky posted a topic in Tour and Pre-Release Equipment , April 3

Popular Now

By dj6627 Started 13 minutes ago

By EmperorPenguin Started 12 hours ago

By jimecherry Started Wednesday at 08:19 PM

By touch Started February 1, 2023

Welcome. Register Here.

Come on in, the water is fine...

Recent B/S/T

brock9007 · Started 17 minutes ago

Forescoreand7bogeysago · Started 35 minutes ago

george49 · Started 2 hours ago

Needsmoreeagles · Started 11 hours ago

malelee21 · Started 11 hours ago

GolfWRX_Spotted · Started December 5, 2023

• Existing user? Sign In

The Bag Room

• Tour & Pre-Release Equipment
• WRX Club Techs
• Golf Sims/GPS/RFs/Apps
• Golf Style and Accessories

The Club House

• General Golf Talk
• Classic Golf And Golfers
• Courses, Memberships and Travel
• Groups, Tourneys, and Partners Matching

WRX Academy

• Instruction & Academy
• Rules of Golf and Etiquette
• Swing Videos and Comments

Classifieds & ProShops

• Deal/No Deal

Website Help

• Forum Support
• BST AD Help Forum

My Activity Streams

• BST/Deal Activity
• All Activity
• Unread - No BST/19th
• Subscriptions

Classifieds

• For Sale Forum
• Wanted to Buy
• Mall of Pro Shops
• Where Did My Ad Go?
• Trade In Tool
• Create New...

COVID-19 UPDATE

Open and shipping orders.

The COVID-19 pandemic is a global health event unlike anything we’ve ever seen. Our focus first and foremost is on keeping our employees safe, but we also are working to maintain operations and business execution for our customers, end-consumers and employees. y As we move ahead, Bushnell Golf will continue to provide a healthy environment for our employees and the entire organization is following guidance issued by federal, state and local health authorities. To learn more about our COVID-19 response, read an open letter from our CEO. If it’s in stock on bushnellgolf.com, we’re shipping. Questions: [email protected] send an email

• United States

• Login or Register -->
• Questions? Call (800) 423-3537

Support for your Tour V4 Laser Rangefinder (Product #s: 201660P, 201660).

• Getting Started • FAQs • Manuals • Warranty • Replacement Parts • Additional Information --> • Connecting to the Bushnell App -->

GETTING STARTED

Tour v4 setup.

Please register your device on bushnellgolf.com . This registration is for receiving Bushnell Golf support, product discounts,  and new product information.

Next, install the Bushnell Golf App on your phone. The Bushnell Golf App can be found by searching your phone's app store or via the below links.  

• • Android
• • Apple

Open the Bushnell Golf App and add your rangefinder as a device. 

• • The first field is the serial number from the bottom of the device.
• • The 2nd field is the manufacture date that is also on the bottom of your rangefinder in YYYYMM format.
• • If you get an error that the serial number is already in use, you will need to e-mail iGolf at [email protected]   requesting the serial number be released.  Please include your serial number from your rangefinder with this e-mail.

Registration through the Golf app also creates your user ID and password at the Bushnell iGolf website https://bushnell.igolf.com/ . This will be the website for software and course updates. Laser rangefinders don't really need software updates. 

Your initial battery should last for a few months. If you start to experience any issues with the performance, replace the battery with a high quality (Panasonic, Duracell, or Energizer), CR-2 3 Volt Lithium battery that is right out of the package. Once you replace the battery, press & hold the fire button for 10 seconds. We recommend carrying at least 1-2 spares in your golf bag so that you always have a fresh new battery for full functionality.

I see debris in the lens?

The issue you described sounds like your device may have some solar burns. Over time, the device can develop small dots due to sun exposure. The dots are cosmetic and should not affect the actual performance of the device. In some cases, the amount of solar burn has become substantial enough to interfere with the viewing area. In this event, please contact Bushnell Golf Support for options.

My Tour V4 is off by 10 yards?

The Tour V4 can be used to measure distance in yards or meters. The unit measure indicators are located in the lower right portion of the LCD. To select between yards and meters (starting with the unit power off), press and hold the Power/Fire button. After 7 seconds, the display will begin to cycle through the options: Yards or meters. When the units you want are displayed, release the Power/Fire button to select it. Y for Yards or M for Meters. The Tour V4 will return to the last unit of measure setting used each time the unit is turned on.

The display is out of focus.

Power the unit on by pressing the power /Fire button once. Rotate the eyepiece in either direction until the display icons and numbers are in focus.

Tour V4 User Manual

TWO-YEAR WARRANTY

Bushnell Golf guarantees the Tour V4 Laser Rangefinder to be free of defects in materials and workmanship for two years from the date of purchase. This warranty does not cover consumer-caused damages such as misuse, abuse or repairs attempted by someone other than our authorized technicians.

WARRANTY FAQ

Is the tour v4 waterproof.

No, the Tour V4 is water resistant, but should not be exposed to heavy rain or other direct streams of water and will not withstand submersion in water or other liquids. Damage caused by water is not covered under the two-year limited warranty.

Can I clean the Tour V4?

Yes, follow these steps.

• 1. Blow away any excessive dust or debris on exterior (or use a soft brush).
• 2. To remove dirt or finger prints, clean with the supplied micro fiber cloth rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
• 3. For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply fluid to the cleaning cloth - never directly on the lens.

When do I replace the battery?

Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover). We recommend replacing the battery at least once every six months.

REPLACEMENT PARTS

Replacement Battery Cap for Tour V4, Tour V4 Shift, or Hybrid

Replacement Eye Cup for Tour V4, Tour V4 Shift, or Hybrid

ADDITIONAL INFORMATION

BUSHNELL TOUR V5 & TOUR V5 SHIFT See the Bushnell V5 and V5 Shift in action — and hear from the experts how PinSeeker, slope compensation, BITE magnetic mount, and crystal clarity can evolve your everyday play.

BUSHNELL TOUR V5 & TOUR V5 SHIFT DANCE COMMERCIAL Upgrade your game. The new Tour V5 features an integrated BITE magnetic cart mount, PinSeeker with Visual JOLT and improved magnification and clarity. Also available in Tour V5 Shift featuring our patented Slope Technology that provides golfers the most precise compensated distances in golf.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus.

CONNECTING TO THE BUSHNELL APP

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus, blandit dui quis, tincidunt lorem. Cras scelerisque aliquam congue. Suspendisse potenti. Aliquam quis sem eget nulla lobortis laoreet. Curabitur id consectetur ipsum. Nulla at bibendum lectus, quis gravida est. Nam ut efficitur tellus, quis vulputate arcu.

Was this useful?

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas pharetra nisl quis viverra egestas. Phasellus nec lacinia sapien, vel fringilla est. Interdum et malesuada fames ac ante ipsum primis in faucibus.