trek mountain bike 19 inch frame

Your Bicycle Size Guide

Trek Bike Size Chart By Height In CM & Inches (Road Bike/MTB)

A Trek bike size guide is all you need when the search for the correct bicycle size is still on. Known to be the number 1 performance bike brand all over the globe, Trek has been stacked with powerful engineering and classy bikes.

There are many questions revolving around passionate fans of the brand with one of them being, what size Trek bike do I need?

Well, the answer is very simple. You will need to go through the charts below for a particular bike type and model you are looking for.

Trek size charts

Trek bike sizes can vary, and that can lead to more confusion among potential buyers. The below charts will help in choosing the right model according to your height and inseam.

Trek mountain bike size chart

Trek mountain bikes come in different categories and offer sizes for every individual, starting from extra small to extra large. Take a look at the tables below and select the ideal fit for yourself.

Category – Full suspension, Hardtails, Electric, Cross Country, Trail, Enduro, Downhill, Fat Bikes, and Fuel EXe (E-MTB)

Models/Series – Supercaliber, Top Fuel, X-Caliber, Procaliber, Farley, Roscoe, Marlin, Powerfly, Service, 820, Slash, Remedy, Fuel EX, and Session

Trek MTB Cross Country (820)

Trek e-mountain bike.

Models/Series – Powerfly, E-Caliber, and Rail

Trek road bike size chart

Road bikes are an essential part of the brand that caters to a wide range of audience, thanks to its diverse range of models. These Trek road bike size charts shall help you pick the right bicycle that can go a long way for an adventurous ride.

Category – Performance/Gravel

Models/Series – Madone, Emonda, and Domane

Category – Bikepacking/Cyclocross

Model/Series – 520 and 520 Grando

Models/Series – Checkpoint and Boone 6

Model Series – 1120

Trek electric road bike sizing

Models/Series – FX+, DUAL SPORT+, vEREVE+, and Allant+

Trek alpha sizing for MTB – what is it?

The old-school approach of measuring the frame size of Trek bikes is a thing of the past. With newer inventions and modern bike geometry, alpha sizing is used in place of numeric sizing on Trek mountain bikes.

Why is alpha sizing important?

1. Easier approach

Instead of using size numbers like 19.5, the sizes can be classified into S, M, ML, L, XL, and XXL. So, someone with a 17.5 size can go for the medium and a 19.5 is a large size. You don’t have to keep a tab on numbers; instead, the alphabet makes it easier.

2. Measurement based on reach

In earlier times the frame size measurement of Trek bikes was solely based on seat tube length. Things have changed, and modern mountain bike geometry focuses more on reach as of now. Hence, alpha sizing measures what matters and is a more simplified way of measuring bike size.

Trek sizing – virtual vs actual

This can puzzle you a bit as they both are somewhat similar yet there is a subtle difference. Actual size can be termed as the overall length of the seat tube from the center of the bottom bracket to the center of the top tube intersection with the centerline of the seat tube.

On the other hand, virtual sizing is the overall length of the seat tube ranging from the center of the bottom bracket to the mid-point of the imaginary horizontal top tube in which it connects with the seat tube.

If I had to give you an example, a bike might have a virtual size of 18.5 and an actual size of 17.5. This means that the bike size feels like 18.5, but in actual sense, the frame size is 17.5. It doesn’t make much of a difference as it is there only to let you know what it is (actual size) and what it looks like in size (virtual size).

People also ask

Trek 17.5 frame size – what does it mean.

A 17.5 frame size is considered an M size (Medium) in terms of alpha sizing. Any individual who is 161-172 cm or a height of 5’3.4”-5’7.7” . If you are within this height range, going for a medium size shall be the right choice.

Trek medium frame size is for what height?

A medium size frame size (17.5) is ideal for a person with a height between 5’3.4”-5’7.7 ”. In centimeters, it is ideal for those around 161 to 172 cm in height.

Trek 24-inch bike is for what age?

When it comes to children, their bikes are measured in terms of wheel size instead of the standard frame size. These kid’s bikes have a size range between 12-26 inches, depending upon the height of the kid.

As far as a 24-inch wheel size is concerned, any kid between the ages of 8-11 can go for a fun ride with it. Some of the popular 24-inch bike models are Trek Roscoe 25, Wahoo 24, Trek Precaliber 24 , etc.

Trek 26-inch bike is for what height?

A 26-inch wheel-size bike is for kids with a height of 4’9”-5’3” (146-160 cm) . Wahoo 26 is a prime example of a bike in this category.

Trek 20-inch bike is for what age?

Trek 20-inch bikes are for children between 5 to 8 years of age. Additionally, if they are within the height of 3’9”-4’6” , it should be suitable for them.

Are Trek bikes good?

Trek bikes are considered to be extremely good and solid in build. It is known to be the number 1 performance bike brand all over the globe. Having its humble beginning in the year 1976 in Waterloo, Wisconsin, it has turned into the largest bicycle manufacturer all over the world. With an array of bikes ranging from, mountain, road, electric, and kids bikes, there is a lot to choose from a mammoth list.

How much is a used Trek bike worth?

It depends on a lot of factors in terms of how old the bike is, the year of production, which model, and a lot more. However, it can be within $1000-10,000 (depending on the model and other factors) .

Where are Trek bikes made?

The majority of their bikes are manufactured in Taiwan, China, Netherlands, and Germany too.

Why are Trek bikes so expensive?

Usually, the bike brand prefers top-tier components, suspensions, and frames that are ahead of its competitors. This results in additional costs that can be seen in the price tag and also many top-end Trek bikes are custom-made with less production, leading to being more expensive.

Trek bikes are a class apart in many ways with a range of bikes on offer for its fans across the world. Choosing the right size for you can be tricky, but this is where the Trek frame size chart comes to the rescue.

Trek as a bicycle brand might be on the costly side, but they punch above its weight to provide top-class bikes for the masses. I am always someone who roots for quality, and Trek provides what I need.

One comment

Thanks for your informative post. I really like the Trek alpha sizing for MTB because Trek frame sizes use alpha sizing rather than the usual inches or centimeters (cm), and they usually have a certain range of measurements.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Ridley's Cycle

• Stores Stores
• Account Account
• Subtotal : $ 0.00 Checkout Cart

Mountain Bike Size Chart & Fit Guide

Use this guide on mountain bike sizing to determine the right size bike for you. No matter your height and riding style, there’s a perfect fitting mountain bike out there for everyone. Don’t know which size bike you need? Take a look at our mountain bike size chart below to find out your frame size.

Keep reading to learn about mountain bike geometry and what to do if you are stuck between two sizes. There are so many bike shapes, sizes, and designs available, so head over to our catalog to shop all mountain bikes.

Mountain Bike Size Chart How To Size MTBs Wheel Size Geometry & Sizing

Mountain bike size chart

This chart is a great starting point, but isn’t always the definitive answer due to varying frame geometry and riders having unique proportions. Feel free to swing by our locations to test ride a mountain bike and know for sure. Keep reading to learn about other factors that go into choosing the right mountain bike size.

What is the right size bike for me?

Rider height is the main factor when it comes to finding your correct size. The best place to start is a mountain bike size chart. Check our helpful size chart above or look at model-specific charts published by a manufacturer on their website.

But sometimes the single data point of rider height can’t provide all the answers. If you fall between suggested chart sizes or want to double-check that you’ve got the perfect fit, there are additional metrics to help you decide:

Choose by skill level

More skilled riders can handle larger frames and take advantage of the increased stability while descending at high speeds, but a new rider may find that sizing up gives them "more bike" than they can comfortable control.

Choose by riding style

If you favor an aggressive riding position and a more stable feel, choose a larger frame for a longer wheelbase and roomier cockpit. If you prefer nimble handling and a more relaxed position, you can choose a smaller size.

Choose by wheel size

Most models share the same wheel size across the various frame options, but some brands put smaller wheels on their XS or S frames. Large 29” wheels are appropriate for all adults, but smaller riders might find them a bit unwieldy.

Choose by frame geometry

Every frame is different, so it’s important to test ride a few models to get a real feel of how they match your body and riding style. Later in this guide, we’ll break down the most important elements of frame geometry and what to look out for.

Mountain bike wheel size

The main wheel sizes available on mountain bikes are 26”, 27.5” and 29”. Choosing the right wheel diameter for you can help narrow down your search and help you find the perfect bike to fit your needs.

While the old standard for mountain bikes was 26”, the cycling world has embraced larger wheels because of their improved traction and ability to roll over obstacles. Bigger wheels will roll easier over obstacles than smaller wheels and can maintain higher speeds on rough terrain. 

Fast downhill bikes almost always come with 29” wheels. Large wheels also have a larger contact patch, meaning more rubber touches the ground to boost traction. Bigger isn’t always better, though. The medium 27.5” wheel size is ideal for riders nimble handling for better agility.

What height is a 29 inch bike for?

Any adult can ride a mountain bike with 29” wheels, but 29ers are the ideal choice for taller riders over 5’7”. The large diameter wheels can feel a bit unwieldy or bulky for shorter riders or riders who aren’t as confident on the trails. Many brands put 29ers on larger frame sizes and 27.5” wheels on small frames to offer a consistent bike fit.

More on 29 inch mountain bikes

The bigger diameter of 29” wheels allows them to reach higher top speeds, roll over large obstacles, and increase stability. Larger wheels have a smaller angle of attack when they come in contact with a rock or root out on the trail and can more easily roll over obstacles. 29ers are the go-to size for downhill mountain bike races where riders need to maintain high speeds over rough terrain.

The larger contact patch of a 29” wheel also means more traction and grip, but not necessarily while cornering. The disadvantage of big wheels is that they can be less agile and responsive while turning or executing quick maneuvers. Check out our catalog and shop 29 inch mountain bikes.

What height is a 27.5 inch bike for?

27.5 inch bikes are suitable for adults between 5’2” and 5’10”. That said, adults of all heights can ride this wheel size. Some brands claim that 27.5” wheels are especially useful for riders 5’7” and under.

More on 27.5 inch mountain bikes

Bike manufacturers like Trek and Giant have realized that matching smaller wheels to smaller frames can make for a better overall fit. Trek’s Smart Wheel Size approach pairs 29” wheels with M, L, and XL frames and puts 27.5” wheels on XS and S frame sizes.

27.5” wheels are more agile and responsive on technical terrain when compared to their 29” counterparts. They are big enough to roll over obstacles better than 26” wheels and small enough to provide nimble handling. As long as you’re not doing intense downhill riding, 27.5” wheels are the ‘goldilocks’ middle wheel size compatible with most terrain and rider heights.

What height is a 26-inch mountain bike for?

A 26” mountain bike is the ideal set-up for younger riders or shorter adults who are between 4’10” and 5’5”. This smaller size is also great for riders that are not as confident on the trails. The smaller diameter 26” wheels are more agile out on the trails and are easier for shorter riders to maneuver over tricky terrain.

More on 26 inch mountain bikes

26” is the most common mountain bike wheel size on old school bikes, many of which are still around today. If you are on the hunt for a retro bike or are fixing up that bike in the garage, odds are it’s paired with a 26” wheelset. Remember that back in the day almost all mountain bikers regardless of height rode bikes with 26” wheels, so if that’s what works for you, feel free to buck the current trend of larger rims.

Bikes designed for dirt jumping utilize 26” wheels with strong alloy rims to handle landings after getting some serious air. Smaller wheels are stronger because they have shorter spokes, making the link between hub and rim less vulnerable to deforming under stress.

Large kids bikes utilize 26” wheels as the last step before tweens are ready to make the jump to adult sized bikes. Kids can continue to build up their riding confidence and skills on 26” wheels and switch later on to bigger mountain bikes.

Is it better to size up or down on a mountain bike?

Size up if…  you are a skilled rider or prioritize stability on fast descents.

Choose the smaller size if … you are a less aggressive rider or desire a more upright riding position and nimble bike handling.

If you find yourself between sizes on mountain bike size charts, additional metrics and rider preferences can help you figure out your perfect size. Bike size charts are simply suggestions and are often based on a single height measurement, so they fall short of telling the whole bike fit story. Follow this advice to pick the correct size when you’re right on the edge of two frame sizes.

When to size up on a mountain bike

Going a size up means a longer bike with more space between the pedals and handlebars and bigger range of motion when standing up on the pedals. 

This extended set up is best for riders with relatively long torsos or who are flexible enough to handle the longer reach. 

Bigger bikes will naturally have a slightly longer wheelbase. Wheels farther apart means the bike will be more stable at high speeds and feel hefty rather than nimble on technical trails.

When to size down on a mountain bike

Sizing down is the right option for people that want a more relaxed, comfortable riding position or like agile and responsive bike handling.

Smaller frame sizes have a shorter reach so the handlebars are closer to the seat, placing the rider in a more upright position. This is ideal for less flexible riders or riders with relatively long legs compared to their torso. 

The slightly shorter wheelbase provides a more nimble and zippy ride feel. As a less aggressive set-up overall, a smaller frame is the right choice for beginner to intermediate riders.

How mountain bike geometry affects bike size and fit

The overall shape and geometry of a mountain bike is composed of many specific measurements beyond just the frame’s size. Some of the most important measurements to pay attention to when it comes to size are reach, wheelbase, standover height, and stack. These dimensions make a big difference to how a bike will fit your body and perform on certain terrain.

There can be a little bit of number crunching when it comes to frame geometry, but understanding these metrics is key to getting the most out of your bike. There’s plenty to geek out on but don’t worry, we won’t go too far down the rabbit hole.

Reach on a mountain bike frame is the horizontal distance between the bottom bracket and the center of the head tube. Basically it tells how much room there is between where your feet go and where your hands go on the bike and how much range of motion the rider has while pedaling.

Reach determines how far riders need to lean forward to grab the handlebars while standing on the pedals. MTB riders are frequently standing out of the saddle on descents or while climbing steep sections. Riders need sufficient room to maneuver on technical terrain, but not so much that they are too stretched out. Reach is the most important metric to pay attention to because it changes the between frame sizes.

Too much reach and you’ll be leaning too far forward while in the normal riding position. Short reach means the handlebars are relatively close to your body— riders can feel overly upright with not enough weight over the bottom bracket to pedal efficiently.

Standover height relates to how high the top tube is when you are straddling the bike with your feet on the ground. It’s like when you stop at a stop sign and hop off the saddle to stand over your bike frame— there should be at least 2” of clearance between the top tube and your groin.

Standover height is more important for road bikes than it is on modern mountain bikes. MTB frame designs today have quite low standover heights, so it’s never a worry that it’ll be difficult to swing your leg over the frame to mount the bike or that you won’t be able to comfortably straddle the frame. That said, always check you have enough clearance to allow for quick and safe dismounts.

Wheelbase & Chainstay Length

Wheelbase is the horizontal distance between the front and rear axles on a mountain bike. How far apart the wheels are is a major factor that determines whether a bike feels more stable or more nimble.

A longer wheelbase is more stable and is easier to control at high speeds, useful for steep descents or fast trails. Shorter wheelbases means the bike is a bit more compact and will be more maneuverable on technical terrain and around tricky obstacles.

Since wheelbase is essentially a measurement of the frame from one end to the other, wheelbase is made up of other metrics like reach, head tube, angle, and chainstay length added together. It’s important to recognize where the extra length (or lack thereof) is coming from to understand how the overall bike will feel out on the trails. 

Chainstay length, or rear center, is another measurement to look at. Chainstays connect the bottom bracket to the rear axle, and longer chainstays provide more stability at speed, while shorter ones feel more nimble. Some models utilize the same chainstay lengths across the size range, but not all.

Stack is the vertical distance between the bottom bracket and the center of the head tube and determines how a bike will feel while pedaling in the saddle. While still an important metric to consider, stack doesn’t change as much as reach does between frame sizes. 

Stack gives riders a clue on how high up the handlebars will be relative to the pedals. If stack height feels too high or low, it can be adjusted with headset spacers or handlebar rise to fit the specific rider.

Let us help you find the right size mountain bike

Even with all the information and advice out there, there’s nothing like test riding the real thing. If you’re still undecided on which size is right for you or want some additional assistance, our bike experts are ready to help.

Visit one of our three Calgary area locations to test ride a mountain bike and find the perfect match. Whether you are seeking performance gains or recovering from an injury, explore the fitting services we offer to achieve a precision bike fit.

Explore Our Top Mountain Bike Brands

Mountain Bike Size FAQs

Why do some mountain bike frames use inches for sizing.

How to size a mountain bike has changed and bikes today are categorized according to alpha sizing (think: S, M, L, XL) rather than the length of the seat tube. 

Traditionally, frame sizes were listed in inches, but modern mountain bike designs with their low standover height and diverse geometries prevent seat tube length from being a representative measurement. Bike brands have realized that “size S” is much more intuitive for customers than listing a frame as “15 inches”. 

Many bike manufacturers have moved away from gender-specific designs and, instead, offer their bikes in a variety of sizes to fit any rider. For that reason, most brands don’t provide a women’s mountain bike size chart. The mountain bike frame size chart above works well for all types of riders regardless of gender or height.

What size mountain bike should I get for my height?

Riders under 5’5” fit best on either S or XS mountain bike frames, depending on which of those sizes are available. If you are between 5’6” and 5’10”, choose a size M. Riders 5’11” and taller should get an L or XL frame. Check out our mountain bike size chart for an exact recommendation.

What size mountain bike do I need if I'm 6 feet tall?

Riders that measure 6’ tall should ride a size L mountain bike frame. Some bikes use seat tube length instead of alpha sizing to measure their size. Look for a frame size marked between 19” to 20”.

How do you size a mountain bike?

Modern mountain bikes use alpha sizing to categorize frames as XS, S, M, L, or XL. Older mountain bikes used seat tube length, or the vertical distance from the bottom bracket up to the seat post clamp. Check out our mountain bike size chart or the sizing tools on a brand’s website to determine the correct size for you.

How do you measure yourself for a mountain bike?

The most important measurement to take is rider height. Take an updated measurement of your height (or have a friend help you) and compare it to our mountain bike size chart to find out which frame size works best for you.

What size is a medium mountain bike?

A medium mountain bike typically has a frame size of between 16” to 18”. Medium bike frames can fit riders between 5’6” and 5’10”.

Is a 19 bike frame a large?

A 19” bike frame is typically rated as a large frame, appropriate for riders between 5’10 and 6’2”. Depending on the manufacturer and specific model, large bikes can have frames that measure 19”, 19.5”, or 20”.

Is my mountain bike too small?

Feeling cramped, high knees while pedaling, and sitting too upright can be signs that your bike is too small. The reach, or horizontal distance from the bottom bracket to the center of the head tube, should be long enough that you can have a good range of motion both in and out of the saddle.

We're here to help you with your bike sizing and cycling apparel sizing needs.

Sizing charts

Use the "sizing & fit" link at the top of any product page to find the size that's best for you.

Fit technicians

If you fall across two sizes or have questions about the bikes size that will best suit you, see the expert fit technicians at your local retailer.

• Mountain bikes
• Hybrid bikes
• Kids' bikes
• Women's bikes
• Men's apparel
• Women's apparel
• Cycling shoes
• Cycling helmets
• Cycling gloves
• Cycling socks
• Cycling warmers
• Apparel fit guidelines

Mountain Bike Frame Size Chart: 3 Easy Ways to Get the Perfect Fit

What size mountain bike frame do I need? That’s one of the most commonly asked questions by our readers. 

Ordering  bikes online is becoming more and more popular. Bikes are typically more affordable online than in local bike shops because overhead costs are lower, allowing online stores to sell their bikes at cheaper prices.

But what about the good old rule that says you need to try a bike before buying it? While this can be beneficial, it’s often an overrated method and not necessary for everyone.

If you go to a local bike shop and sit on a bike, you’re more likely to buy it, which is why shopkeepers would like you to do it. But the reality is that most novice riders don’t know how a bike should feel during their first test ride, so this sizing method is not valuable for inexperienced riders.

You should try your bike first! Not completely true!

Even though everyone is built differently, most people’s bodies fall into certain categories in terms of height, inseam length, and arm length. Therefore, unless you’re have an unusual ratio of upper and lower body length, you can trust mountain bike size charts to recommend you the right frame size.

Related : Best Mountain Bikes You Can Get

With that in mind, there are several reliable methods to choose the right mountain bike frame size.

In this article, I’m going to show you how to use mountain bike size charts and online calculators to get the right size and fit in seconds!

Method #1: Mountain Bike Size Chart

Method #2: online bike size calculator, method #3: mountain bike sizing formula, bonus tip: finding the right saddle height, mtb geometry guide, how to choose when in-between two sizes, what if i still got the wrong bike size.

The easiest way to find the correct bike size is by using a mountain bike frame size chart. This is a simple method that lets you compare your height and/or inseam length against a chart that recommends the correct frame size.

Mountain bike frame sizes are measured based on seat tube length , expressed in inches, which typically ranges from 13″ to 24″. Effective top tube length (the horizontal distance between the head tube and the seat tube) plays a role as well, but seat tube length is a more common measurement.

Some manufacturers also use size classes, such as XS, S, M, L, and XL, but these are not as reliable as using inches because the measurements can differ from one brand to another.

What mountain bike frame size do I need? Find the answer in the chart below:

Bonus tip:   If you’re buying a bike on Amazon, you can also check out their Amazon Fit Guide   which includes sizing recommendations for adult road bikes, adult mountain bikes, and kids’ bikes.

Related:   Best Gravel Bikes You Can Buy

These are interactive tools that let you enter your height and inseam length and then recommend you the correct size or range of sizes to consider.

Before you can use one, you need to learn how to correctly measure your inseam. Here’s a quick step-by-step guide:

• Take off your shoes and stand with your legs 6″ to 8″ (15-20 cm) apart.
• Place a book between your legs, as far up as you can.
• Measure the length from the ground up to the top of the book.
• Voila! This is your inseam length that you can now enter into an online bike size calculator.

When using a bike size calculator, make sure to choose the right type of bike—mountain bike, city bike, or road bike—as the measurements will differ based on that.

If you’re not sure about it, you can read more about the different bike types here .

Here are the top online bike frame size calculators we recommend:

1. Ebicycles.com Online Calculator :  An easy way to find the right MTB frame size by using your height and inseam length. 2. Competitive Cyclist Fit Calculator :  A more detailed bike fit calculator that lets you know the correct standover height range, top tube length, saddle height, and more. 3. Jenson USA Bike Fit Calculator :  Another in-depth bike fit calculator that suggests the right bike size and helps you nail the fit afterward.

One of the easiest but also the least reliable methods of finding the right mountain bike size is using a simple mathematical formula that uses your inseam length.

It goes like this:

Leg inseam (cm) x 0.66 = Your frame size

For example, if your leg inseam is 76cm , multiplied by 0.66 then your correct mountain bike size is 20″ (50cm) .

This method is only good for approximating the correct size, but we don’t recommend relying on it exclusively. It’s best to combine it with the results you get from the mountain bike size chart and online calculator that we’ve shown you above.

Setting the saddle height correctly has a very important impact on the overall bike fit.

If the saddle height is too low, you won’t be able to transfer power to the pedals effectively and your legs may fatigue more quickly. I have experienced that firsthand in mountain bike racing—when the saddle falls down by one inch from its ideal position, I lose about 25-50% of my power .  

Now that we know how important finding the perfect saddle height is, how should we do it?

The easiest way is to:

• Hop on your bike wearing the shoes that you typically use for cycling (flat or clipless).
• Lean against the wall  for support or have someone help you stay in an upright position. You can also use a bike trainer for this purpose.
• Push the pedal down to its lowest point (6 o’clock) while keeping the foot parallel to the ground.
• At this point, you should have a slight bend in the knee, as shown in the image above. Adjust the saddle height accordingly until you achieve it.

The next step is to go outside and ride . Does it feel good? If not, then make further minimal adjustments (a few millimeters at a time) until the saddle height feels natural, your power transfer is optimal, and you’re not feeling any pains or aches.

Related: Check Out The Best Fat Tire Bikes

Once you’ve determined your ideal saddle height, it’s a good idea to mark that position with a marker, as saddles can lower with time. Some bikes come with height indicators on the seat post, so make sure to remember the correct marking for future reference.

Mountain bike geometry refers to the actual shape of the bicycle, the measurements of different tubes and angles, and their relations to each other.

Here’s a brief guide on the most important measurements you need to be aware of to get the right fit:

• Reach: This measurement refers to the horizontal distance between the center of the bottom bracket to the top center of the head tube. It affects the length of the bike and the overall stability and ride feel.
• Stack:  Refers to the vertical distance between the center of the bottom bracket to the top center of the head tube. It affects how upright your position will be and how tall the handlebar will be.
• Standover height: This is the height from the ground to the top of the top tube. Make sure that this measurement is at least an inch shorter than your inseam length to be able to stand over the bike with both feet flat on the ground.
• Wheelbase: This is the distance between the centers of both wheels. A shorter wheelbase provides more agility, while a longer wheelbase improves stability.
• Head tube angle: This is the angle between the ground and the bike’s fork. A slacker angle (lower number) means the bike is more stable on rough terrain, while a steeper angle allows more responsive steering.
• Seat tube angle: This measurement refers to the angle between the ground and the seat tube. A steeper angle improves climbing ability, whereas a slacker angle is better for descending.

So you’ve consulted a mountain bike size chart or an online calculator and the results put you right in the middle of two sizes. What do you do? Should you size up or size down?

Each option has some pros and cons and the final decision depends on your:

• Flexibility
• Leg-to-torso length ratio
• Riding style

Here are some of the most important factors to consider when deciding whether to get a one size bigger or smaller mountain bike.

When to Size Up?

Mountain bikes grow in length (reach) and in height (stack) with each frame size. But modern mountain bikes grow more in length (reach), which is why this is a more important measurement to consider.

Assume you are in between two sizes and you decide to size up. You’ll get a bike with a longer top tube and a longer wheelbase, which means your handlebar will be further away from the saddle.

How does this affect the factors we’ve mentioned above?

Flexibility: This is a good option for riders who are flexible and can easily reach their toes when bent over. A longer top tube means you will need to hinge more at the hips, which can be painful and uncomfortable if you’re stiff and have a short range of motion.

Leg-to-torso length ratio: If you have short legs and a long torso, you should size up when buying a mountain bike as this will give you a more neutral fit. But make sure that the standover height is not too high so that you can’t stand over the bike comfortably.

Riding style: Finally, a larger frame size translates to a longer wheelbase, which means the bike will be more stable on rough terrain and go over obstacles with more ease, but it will feel less playful and more difficult to maneuver.

When to Size Down?

Similarly, a smaller mountain bike will have a significantly shorter reach and a slightly shorter stack and wheelbase. A smaller bike will also have a shorter maximum seat post height, so you may need to extend it depending on how long your legs are.

So how does this relate to the three most important factors mentioned above?

Flexibility: If you are not a flexible person and you struggle to reach your toes with your fingers, then you’ll benefit from a shorter reach a smaller mountain bike frame size offers. It will put you in a more upright riding position, with handlebars closer to your body, which means you can ride for longer without experiencing discomfort.

Leg-to-torso length ratio: Sizing down is a logical choice for riders who have longer legs and shorter torsos. This way, the bike will feel more comfortable, but you may need to use a longer seat post to get the proper leg extension.

Riding style: A smaller mountain bike with a shorter wheelbase will feel more nimble, playful, and easier to handle over rough terrain. If you like flicking your rear wheel and going around obstacles instead of plowing through them, a smaller bike is the right choice.

Sometimes, even after going through all the methods and consulting several mountain bike size charts, you may find that the bike doesn’t feel right and that you’ve probably chosen the wrong bike size.

Don’t worry, if you’re off by one size or even half a size, there are easy fixes you can try to improve the comfort and fit!

The first thing to do is to contact the retailer/manufacturer and try to get a replacement. Under the right conditions, you’ll be able to get a different frame size bike without significant additional costs.

If you don’t want to go through the hassle of shipping the bike or this option is not available, you can try the following things:

• Adjust the fore-aft position of the saddle: The fore-aft position of the saddle can be adjusted slightly to lengthen or shorten the reach. Make sure not to overdo it so your knee doesn’t end up too far in front or behind the middle of your foot when in the 3 o’clock position.
• Replace the stem: By using a longer or a shorter stem, you’ll be able to increase or shorten the reach by a few centimeters. In most cases, this will be enough to significantly improve the feel and ride quality.
• Replace the seat post:  If you bought a bike that is too small and you can’t extend the leg fully when pedaling, consider using a longer seat post.
• Replace the handlebar:  A shorter handlebar will be easier to reach and will put you in a less stretched-out position and vice-versa. If you’re using drop bars, consider getting a model with a shorter or longer reach to fine-tune your fitment.
• Raise the handlebar:  You can easily achieve a more upright riding position and increase the stack measurement by raising the handlebar with headset spacers. If there are headset spacers above your stem, simply move them underneath to move the stem and handlebar higher up.
• Get a professional bike fitting: A professional bike fitter can do all of these steps for you, which is the best option you have, but also the costliest.

Most importantly, give yourself time to get accustomed to your new bike. Sometimes, your body needs a few days or weeks to adjust to the new riding position.

I remember when I got my first 29er mountain bike. It felt huge and I found it difficult to ride it on narrow winding trails and on technical terrain. However, now that I’m used to the 29er, the 26″ mountain bike seems almost comically small.

Mountain Bike Reviews

Are you in the market for a new mountain bike? Start with one of our mountain bike buying guides below:

• NEW! Best Electric Mountain Bikes
• Best Cheap Mountain Bikes
• Top 11 Best Full Suspension Mountain Bikes
• Best Mountain Bikes Under $500
• Best Mountain Bikes Under $1,000
• Best Mountain Bikes Under $2,000
• Best Mountain Bikes You Can Buy on the Market

Related Topics:

297 thoughts on “ mountain bike frame size chart: 3 easy ways to get the perfect fit ”.

Hi. I am 6ft 1 90kg. Should I go for XL or L?

Hey TJ, I think a 19″-20″ (L) mountain bike would be the right choice for you.

I am wanting a bike with the 29” wheel. I am that 5’11 to 6’1 I want to spend 1000 for a hard tail. My inseam is short like 31” I do like the Cannandal the black one. I just want a good rider. Do I want the 27” wheel? I think the large frame not sure at all

Hey Richard, at that height, both a 29er and a 27.5er will fit you fine. Size Large Cannondale should be the right choice for you considering your 5’11” to 6’1″ height.

Hello, I am 165cm in height.. so can i ride on a 17-inch frame bike? Is it suitable for my height?

Hey Am, you should be better off with a 15″-16″ bike, but depending on the model, a 17″ bike could fit you as well. It’s best to give it a try if you can.

I’m 5.7 – right in the middle of a MED and a SM… so hard to decide what size I should go with.. is it really much of a difference? I’m looking into a Fusion 30 2022… I ride both pathways/roads to basic mountain trails… Is the only difference the more responsiveness in a small rather a med?

Hey Christa, it’s usually better to go for the smaller size when you’re right in the middle. It’s a lot easier to lengthen a smaller size bike than shorten a larger size. So I would say go for a SM and enjoy it.

Great article!! It definitely clears out some of my struggle. But still, I have this main concern that is the right range of reach and stack for my height. I am 5″11, 180 cm. I have longer limbs than most people, but super lean, about 68 kg 150 lbs. I am currently riding a L hardtail with 470 reach and 620 stack, I always feel it is too big for me, but every single size chart suggest that the L is perfect size for me. I ended up used mullet wheelset and use the shortest stem that fit- 32mm. Now it feels about right. I am going to purchase my first full sus bike next year, and the 29er enduro bike I am looking at has M(450 reach and 442 chainstay and 630 stack) while L(475 reach, 435 chainstay and 640 stack). I know that the 475 is definately too big for me, but the 450 seem too short too. My most riding condition is XC trails 50%(lot of climb but not too techy), dirt jump park15%, urban freeride 15%(mainly just up and down stairs and bunny hop some curbs) and downhill park 20%. I like doing bunny hops, manual and wheelie, pop some small bump here and there, not a speed seeker but I will use this bike on Whistler bike park so it can’t just be a big full-sus BMX. Since neither size is spot on, and based on my goal, do you think I should go M with a longer stem 50mm+, or gain 15 lbs muscle and get the Large. Looking forward to hearing your thoughts, Thanks

Sorry, Correction :Chainstay length is M 435mm, L 442mm. The specific bike I am looking at is the Cannodale jekyll. It is an DH oriented enduro, but I am not going to use it for dh only, so this is another reason why it is tempting to size down.

Hi Karl, That is why we always emphasize here the need for a proper bike fit. Sure, the standard size should fit people under that category, but making adjustments with the length of the stem, saddle fore and aft, and sometimes crank length is crucial for general comfort during long rides. And talking about sizing down, the smaller the frame, the more responsive the bike is, but here we still rely on what’s conventional, especially since we cater to the general cycling public and not pro racers. So, in conclusion, you need to follow what you feel is comfortable to you.

I am 6’3 (75 in), inseam is 93 cm. What size mountain bike would you recommend? I’ve been told that my inseam is longer than average person of my height.

Hi Craig, I suggest you get the XL just to be on the safe side and do minor tweaks after, for your comfort. Getting a proper bike fit is the safest bet especially when you suspect that your body geometry is unique.

My mistake, my inside leg to floor measurement is 34in

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

• Forum Listing
• Marketplace
• Advanced Search
• MTBR Discussion Forums
• General Discussion

5'11" tall == 19.5" frame?

• Add to quote

I have a Trek Fuel EX 17.5" bike. I'm 5'11" tall. The only other Fuel EX in the store when I bought this bike was a 16.5". The 16.5" was too small as my arms were not quite stretching out far enough...but not terribly noticeable either. With the 17.5", I get full extension on my arms and legs when the crank is at the same angle as the seat post. Of course, you can get full extension on nearly any bike by just adjusting the seat height. Standing over the bike, I can pick it up with around 2" of clearance from wheel to ground. I'm about to get a Trek Top Fuel. There aren't any in my area to sit on and try for sizing. But there are Fuel EXs and those should be close enough. According to sizing charts, I need a 19.5" frame or 18.5" at the least. That's a full two inch difference from where I am now. Seems I would be way too stretched out on a 19.5" frame. The 17.5" seems to work fine for me but that's all I've ever ridden. What am I missing here?  

I'm 5' 11" and I ride a 19inch frame. A tad bit too big, 18.5 would have been better, but they didn't have that size.  

What do you guys recommend for a guy with a short inseam and 5'9"?  

I'd still go with an 18.5 and a short crankset lol  

Both son and I are 6 ft. He is shorter legged than I am and I have a 34 inseam. We both ride 21.5. He races, I coach. Do a really fast downhill on the 19.5, then on the 18.5.  

Thanks. I can probably find an 18.5" to size up.  

brettr2 said: I have a Trek Fuel EX 17.5" bike. I'm 5'11" tall. The only other Fuel EX in the store when I bought this bike was a 16.5". The 16.5" was too small as my arms were not quite stretching out far enough...but not terribly noticeable either. With the 17.5", I get full extension on my arms and legs when the crank is at the same angle as the seat post. Of course, you can get full extension on nearly any bike by just adjusting the seat height. Standing over the bike, I can pick it up with around 2" of clearance from wheel to ground. I'm about to get a Trek Top Fuel. There aren't any in my area to sit on and try for sizing. But there are Fuel EXs and those should be close enough. According to sizing charts, I need a 19.5" frame or 18.5" at the least. That's a full two inch difference from where I am now. Seems I would be way too stretched out on a 19.5" frame. The 17.5" seems to work fine for me but that's all I've ever ridden. What am I missing here? Click to expand...

I'm a little over 6' and all my Treks are 18.5". Best, John  

I would definitly not go by a sizing chart. You need to ride the bike you are going to buy and see what size is comfortable.  

@John Kuhl Hmmmm, I get the feeling I'll be fairly stretched out on an 18.5". Mostly all I can do is sit on the bike to test sizing since there isn't anywhere to ride it. I don't think I can go wrong with a 17.5" frame but even after sitting on the 18.5" (once I find one), that little bit of sitting isn't going to be enough to know. Being a Top Fuel, I want to keep things nimble and agile. That won't be the case if the frame is to big for me, even by a little.  

I am 5'11 3/4" with a short inseam/long torso. I am currently on a 19" Large, but was on a 19" Large 29er, and it felt huge. A medium frame just felt small, and I looked like Donkey Kong on it. I would suggest testing any bike before purchasing, to make sure that the frame is right for your body and riding style.  

Kona0197 said: What do you guys recommend for a guy with a short inseam and 5'9"? Click to expand...

The geometry charts for the current 17.5" models show that the Top Fuel has a .2" shorter ett than an EX. Don't know if a 23.0" ett would be long enough for someone 5-11.  

Heck i'm about 6'1" or 6'2" and i got a 19 inch bike from bikes direct. I used a tap measure and the next size up is a bit to large, and i want to be able to get on the bike comfortably. I have a large frame bike in the garage and i don't like trying to get on it. Bike direct posts standover heights so thats what i measured.  

Depends on your inseam.  

i was 6'1'' the this winter i shrunk to 6' and ride a 19''. a top fuel is a race bike so they may recomend a larger size for a more "racey" feel.  

I am 6' with an ~31" and I went with the 19.5" Inbred with a 90mm stem. To me it feels great and coming from a 18" FS 26", this feels like it fits me much, MUCH better. Talking with my LBS they said the same thing as Shiggy, with the 29er the cockpit changes so you need to be more worried about the ETT than the standover height. I did try and 18" FELT Nine Trail and it felt, ok, not small but not quite right either. What I did as I was building my Inbred was find something that had a very similar geometry and test ride that, then base the feel off that.  

If I picked up a Trek Fuel EX series, it'd have an 18.5-inch frame. I'm 6-foot tall and that frame size seems like it was made for most over 5-10 and under 6-1 or 6-2.  

shiggy said: The effective top tube length is much more important than the seat tube length. Generally, ride the smallest frame you are comfortable on. Click to expand...

I'm 5'10" (guessing), and the 19 fits me perfectly. So does my 19.5 hybrid road bike.  

One other thing I'm just now finding out is there are virtual and actual frame sizes. That's confusing. You guys all talking about virtual or actual? I've been saying 17.5", which is what I own. That is the actual size. Virtual is 18.5". What is Trek referring to on their site: http://www.trekbikes.com/us/en/bikes/mountain_full_suspension/top_fuel/topfuel99ssl/...when you click the geometry tab.  

brettr2 said: One other thing I'm just now finding out is there are virtual and actual frame sizes. That's confusing. You guys all talking about virtual or actual? Click to expand...

im 6'4" and currently ride a 19" frame with 24.5 tt. My next bike will likely be an 18 and have the same TT length or maybe .5" shorter. As long as I can get full seat extension, Im good.  

brettr2 said: One other thing I'm just now finding out is there are virtual and actual frame sizes. That's confusing. You guys all talking about virtual or actual? I've been saying 17.5", which is what I own. That is the actual size. Virtual is 18.5". What is Trek referring to on their site: http://www.trekbikes.com/us/en/bikes/mountain_full_suspension/top_fuel/topfuel99ssl/...when you click the geometry tab. Click to expand...

• ?            
• 15.5M posts
• 516K members

Top Contributors this Month

Join our Email List

Subscribe to our mailing list.

Oversize Charges

Some of our large and/or heavy items are subject to additional oversize charges that are separate from standard shipping costs. Most Bikes are subject to this fee. Learn More

OPEN: Mon, Sat 10-5; Tues - Fri 10-6; CLOSED: Sun

• Account Account
• Stores Stores
• Subtotal : $ 0.00 Checkout Cart
• 15.5-inch 1
• 21.5-inch 1
• Medium/Large 17
• Show More Sizes
• Show Fewer Sizes
• $200 to $499.99 1
• $500 to $749.99 1
• $750 to $999.99 1
• $1000 to $1999.99 8
• $2000 to $3499.99 10
• $3500 to $5999.99 12

Trek MTB Frames

• Bicycling Catalog
• Mountain Frames

A custom bike build is a great way to make a bike uniquely yours.  Tested millions of times over, tried and true, Trek mountain bike frames are built to last and backed with a lifetime warranty.  Since 1976.

Trek 4300 Mountain Bike Review – Should You Buy It?

On the surface, the Trek 4300 seems like an excellent entry-level mountain bike. Everyone says it’s suitable for leisure or forest trail rides. You can check the article for the breed of best mountain bikes under 300 bucks on Expertbiker . The listed bikes are affordable but they are the top performers. Also you can rebuild your life with Relifesports.com .

From its EVO frame geometry, ISO Speed frameset, and full-floating suspension, Trek has raised the bar for the safety of mountain bikes .

Not to mention, the sheer number of options 4300 is available is astonishing. It comes in 13 inches, 16, 18, 19.5, 21, 22.5, and 25 inch frame sizes. There’s also a $370 disc brake version to appeal to those who prefer disc brakes. 

Considering all this and the unique features that set Trek apart, the 4300 seems like a steal at this price point. But is it really so?

Let’s find out in our in-depth look at its specification, features, ride details, and more below. 

The Key Specifications of Trek 4300

• Colors: Matte Dniester Black/Viper Red, Trek White/Signature Green/Placid Blue
• Frame type: Hardtail
• Frame material: Aluminum Alloy
• Frame Details: Gold Alpha Aluminum with the semi-integrated head tube, formed and butted down tube & Top Tube, race geometry, internal cable routing, rack mounts, forged dropouts,
• Gears: 27 speed
• Chainset type: 44-32-22
• Fork travel: 100 mm
• Wheel size: 26 inches (MTB Wheel sizes explained)
• Chainset: Shimano Acera
• Front derailleur: Shimano Acera
• Rear derailleur: Shimano Acera
• Shifters: Shimano Acera M390, 9 Speed
• Front hub: alloy, formula DC20
• Rear hub:  alloy, formula DC22
• Cassette: Shimano Acera
• Brakeset: Shimano M395 hydraulic disc brakes
• Front fork: Suntour XCM
• Wheels: Formula DC20 alloy front hub; Formula DC22 LW alloy rear hub w/Bontrager AT-650 32-hole double-walled rims

The Key Features of Trek 4300

Below are some exciting features of this mountain bike:

The Trek 4300 has an alpha gold aluminum frame. Aluminum frames are strong yet super lightweight. Moreover, the butted frame exhibits fine details, smooth welding, and sophistication you have come to expect from Trek bikes.

Moreover, the curvy wishbone seat stays, and the hydroformed downtube gives it a sporty geometry. Hence, it makes for a very durable bike. With proper maintenance, it should remain in good shape for a long time. 

There’s also a mudguard, multiple bottle cage bosses, rackmounts, and height adjustment spaces. The basic versions feature brackets and hose guides to upgrade to disc brakes.

SUBSCRIBE TO BIKE HACKS NEWS

Want the best cycling experience? Sign up for the latest bikes, gear, and accessories reviews out there.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy

As you expect, the overall geometry feels casually sporty rather than full-on made to race. The RST Gila fork offers 80mm of travel – handy if you are a bit heavy.

However, given the price point, don’t expect rebound damping. You can also hear a slight thunk when the fork re-extends. 

The Trek 4300 has a very decent Bontrager XR2 set of wheels. They are fast-rolling and offer consistent traction in diverse track conditions.

The sturdy Bontrager Camino rims are attached to the Shimano rear hub. While not fully tubeless, they are tubeless-ready to provide some protection against punctures.

Finally, the inner nylon inserts casing provides sufficient sidewall protection making the tires even more durable. 

3. Derailleur Routing

All the cables are – thankfully – routed internally for max protection. Their ports are fixed adjacent to the head tube and seat tube.

This allows you to run the derailleur via its frame, therefore, saving the cable from weather elements and other wear & tear. It also ensures the Trek 4300 runs much smoother, quieter, and clean. 

4. Suspension

This bike has excellent shocks. It absorbs shocks of rough terrain like a pro, making your ride comfortable and avoiding any body aches after a long ride.

With regular maintenance, expect this bike’s suspensions to take a beating for a long while. 

The Trek 4300 has 27-speed gears. Such a wide range of gears provides you with enough versatility to cycle through any track without much effort.

Working in tandem with excellent derailleurs and cranksets, the gears ensure you can ride any obstacle like a pro mountain bike without much effort. 

It features Shimano hydraulic disc brakes that are easy (and efficient) to apply. Unlike mechanical disc brakes, the hydraulic brakes operate much more effortlessly, especially on uphill rides.

They are also more responsive. A little push and the bike come to a grinding halt almost immediately. What’s more, hydraulic brakes require little maintenance as dirt takes more time to accumulate around the pads and brake lines.

However, the maintenance work isn’t easy. You should have at least some knowledge of the closed systems to get the job done efficiently. 

7. Finishing

Sure, it’s not the most good-looking bike out there, but it’s far from an ugly two-wheeler. It has a brown paint job on its entire frame as well as the saddle .

Plus, the white details and decals on the saddle add to the overall aesthetics. 

How’s the ride of Trek 4300?

As the Trek 4300 is very lightweight (at just 12.8 kg), the ride is faster than many comparable bikes like the Marin Northside Trail. In part, that’s because it has fast-rolling center-ridge tires.

It stays steady on uphill rides and rolls smoothly downhill. However, the bike starts feeling out of its depth if the road gets too bumpy. 

As with every other bike at this price point, the primary limitation comes from the fork. Sure, you can hit the road harder with a suspension fork, but when the road gets too bumpy, the untamed rebound makes the ride a little uncomfortable.

You need to keep your arms loose to absorb the shocks. However, once you get used to these limitations, the ride of the Trek 4300 alpha aluminum bike gets smooth. 

Furthermore, the handling is what you expect – conservatively neutral. As there are several options available to adjust the ride’s position, relative beginners will love to experiment a little to find their perfect position. 

Pros: What makes the 4300 mountain bike a good investment? 

• The Trek 4300 is a very affordable mountain bike in this price range. 
• It has mounts for racks, mudguards , and fenders
• Its frame is very lightweight yet solid – with proper care, it will last years of regular use. 
• It has very efficient shocks that absorb most of the bumps without making the ride inconvenient.
• It has huge frame clearance at the rear wheel, so you can upgrade this bike with larger wheels if you want
• Low standover height in comparison with reach
• Its asymmetric rims come with nipple inserts

Cons: What makes the 4300 mountain bike a bad investment? 

• You can hear the clang on the rebound
• The Spinner forks have a rather poor damping
• It has small front chainrings
• It comes with shoddy components. However, the low-quality components make sense when considering their low cost. 

Final Thoughts

To conclude, we can say the Trek 4300 mountain bike is designed to flatter newbies and offer them a stable ride and a reliable base to improve on in the future. In that regard, it does its job pretty damn well.

It’s efficient and affordable as well, thanks to a time-proven design and sensible hardware choices. However, the Trek 4300 is not particularly inspiring, especially on downhill bumpy rides.

Overall, the Trek 4300 alpha aluminum is a competent all-rounder mountain bike that intends to please most riders most of the time. How far it succeeds depends on how far you want to push its hardware.

Trek 4 series comprises several hard-hitters, and 4300 is worthy of a place among them.

Frequently Asked Questions (FAQs) 

What type of bike is trek 4300 .

Trek 4300 is a mountain bike that is designed for mountainous tracks. Due to the alpha gold aluminum frame, excellent shocks, and a wide range of gears, Trek 4300 is a good option for bumpy rides and leisure tracks in the park or streets.

Who is it for? 

The Trek 4300 mountain bike is perfect for beginners or recreational riders who want to test their mountain riding skills. However, if you plan on blasting downhill runs, it may not be a good choice. 

Does Trek 4300 have mounts for racks? 

Yes, the Trek Alpha aluminum frame has mounts for racks, and they’re really helpful on long rides. 

What size bike is Trek 4300? 

The Trek 4 series 4300 mountain bike is available in 13, 16, 18, 19.5, 21, 22.5, and 24inches frame sizes.

What year is Trek 4300? 

The first Trek 4300 mountain bike came out in 2000. After that, the manufacturer released several different versions in subsequent years.

The first Trek 4300 mountain bike came in red and gloss red colors. 

What is the Trek 4300 price?

Today, you can get a brand new Trek 4300 mountain bike for around $300. It’s a real bargain considering all the value it packs in the package.

You can also purchase its disc brake version if you want better brakes. However, it is slightly expensive, coming in at $370 approximately. 

How much does a Trek 4300 mountain bike weigh? 

The Trek 4300 mountain bike weighs approximately 12.8 Kg which is 28.4 pounds.

• Choosing the Perfect Bike: Road, Mountain & Hybrid Guide
• Optimize Your Ride: Enhancing Your Cycling Experience
• Macfox X1: The Best Commuting Electric Bike
• The Cycling Gear Science: Behind the Success of Cyclists
• Legends of the Cycling Track: Profiles of Famous Cyclists

View all results

• Accessories
• Biking Gear
• Electronics
• Exercise Bikes
• Hoverboards
• Mountain Biking
• Skateboards
• Tires and Wheels
• Home & Garden
• Kitchen & Dining

Cycling made Simple.

Made By Cyclists

Discover the Unbeatable Features of Trek 7000

October 23, 2023

‍ Key Takeaways

• The Trek 7000 showcases an ideal blend of lightweight aluminum construction and robust durability.
• Its versatile design guarantees top-notch performance and comfort from urban roads to challenging trails.
• With a perfect union of cutting-edge tech and quality components, it stands as a commendable choice for cycling enthusiasts.

This article may contain affiliate links where we earn a commission from qualifying purchases.

‍ In the cycling world, few names evoke as much respect as Trek. The Trek 7000 stands as one of them because of its amazing features.

The Trek 7000 has an aluminum frame, contributing to its lightweight nature, making it easy for riders of all levels to handle. The comfortable seat post, rear derailleur, and smooth pedals ensure a comfortable ride on trails and terrains. This is a versatile mountain bike with solid durability.

This guide dives into a comprehensive review of this iconic bicycle, analyzing its unmatched features, from the intricacies of its frame to its sophisticated drivetrain and braking system. Whether you're a seasoned cyclist or a newcomer, this deep dive thoroughly explains what makes the Trek 7000 a revered choice among biking enthusiasts.

TABLE OF CONTENTS

‍ Trek 7000 Bike Overview

The Trek 7000 is a versatile mountain bike for casual riders and those looking to hit the trails. This is a solid place to start looking for riders who love bikes with durability.

With its combination of quality components, comfortable ride, and stylish design, the Trek 7000 is an excellent choice for those who want to explore the great outdoors on two wheels.

It's known for its well-rounded features, such as durability and ease of use, and it comes with a medium price tag that doesn't break the bank. So, what should you know about the Trek 7000?

What We Loved

Frame and fork.

The aluminum frame of the Trek 7000 offers a lightweight yet durable foundation for this bike. It's an improvement over the earlier models, built with Alpha ZX aluminum. The high-tensile steel fork features curved blades, ensuring a smooth and comfortable ride on various terrains.

The Trek 7000 boasts a reliable drivetrain, including a Shimano M131 crank, a Shimano TX51 rear derailleur, and SRAM MRX 7-speed twist shifters. These components work together to provide smooth gear changes and excellent performance on various trails.

Wheels and Tires

This mountain bike comes with Bontrager 550 36-hole alloy rims and Bontrager H4 700x35c tires, which provide excellent traction and durability on different surfaces. The wheels and tires are perfect for those who want to tackle off-road adventures or simply enjoy casual rides around town.

Comfort and Size

The Trek 7000 is available in a range of sizes to accommodate riders of different heights. We particularly appreciated the comfortable saddle and easy-to-grip handlebars, making for an enjoyable ride that accommodates various riding styles.

What Could Be Improved

While the Trek 7000 features decent stock brakes, some riders may prefer to upgrade to higher-quality brakes for better stopping power and control. This is especially important for those who plan to tackle more advanced trails or ride in wet conditions.

Accessories

Although the Trek 7000 is a great bike on its own, we believe some riders may want to add accessories like a rear rack, fenders, or upgraded pedals to further personalize their bike and improve its utility.

Trek 7000 Distinctive Features

Comfortable design.

As casual riders, we can't help but appreciate the Trek 7000's comfortable design. The saddle is specifically designed to provide a comfy ride, making it ideal for those long days on the trails.

The bike also has the option to add fenders, a rear rack, and other accessories that make it even more user-friendly. We definitely enjoy riding this mountain bike.

Lightweight Frame

The Trek 7000 mountain bike features a light yet strong aluminum frame. This lightweight property greatly affects our ability to ride longer and tackle uphill climbs easily. The lightweight frame makes it much easier to handle and maneuver while riding.

Smooth Ride Quality

When it comes to ride quality, this bike truly shines. The Trek 7000 is equipped with reliable components such as the rear derailleur and brakes. Its tires are designed for various terrains, providing excellent grip and traction. The bike's fork ensures a smooth ride by absorbing shocks and vibrations.

Core Strengths of the Trek 7000 Bike

Superior durability.

One of the main reasons why we love the Trek 7000 mountain bike is its superior durability. The aluminum frame is made of high-quality materials that can withstand the test of time.

With proper care and maintenance, this bike can serve both casual riders and mountain biking enthusiasts for years.

Efficient Performance

Another core strength that makes the Trek 7000 an excellent choice is its efficient performance. This mountain bike is designed to handle various terrains, making it perfect for those who love to take on new trails.

With a wide gear range, riders can easily tackle hills and enjoy a comfortable ride even on uneven surfaces. The tires on this bike are also designed to provide excellent traction, ensuring a smooth and safe ride.

Advanced Technology

Trek is a brand known for utilizing advanced technology in their bikes, and the Trek 7000 is no exception. The smooth welds on the frame and the durable aluminum material make it a light yet robust mountain bike.

The components of the bike, such as the drivetrain and brakes, are also designed to provide top-notch performance during rides. The high-quality aluminum material used in the frame ensures a durable and lightweight bike that can handle challenging trails.

The smooth welds are not just for aesthetics. They also contribute to the frame's overall strength and durability. The Trek 7000's wide gear range allows you to easily ride up hills and tackle various terrains.

Trek 7000 Frame and Build Quality

The Trek 7000 prides itself on an advanced aluminum alloy frame, ensuring a lightweight yet robust structure. This material choice provides an optimal balance between agility and sturdiness.

The frame's geometry, tailored for both comfort and performance, caters to varied rider preferences. Noteworthy is the meticulous welding technique which offers seamless joints, enhancing the overall aesthetics and durability.

With anti-corrosive properties and rigorous testing, the Trek 7000 ensures longevity, even in the toughest of conditions, justifying its reputation in the biking community.

Trek 7000 Drivetrain and Braking System

The heart of the Trek 7000's performance lies in its precision-engineered drivetrain. Sporting top-tier components ensure seamless gear shifts with a wide range to cater to steep climbs and fast descents.

The bike boasts a modern derailleur system, delivering crisp transitions between its multiple gears. Complementing the drivetrain is its efficient braking system. Equipped with hydraulic disc brakes, the Trek 7000 offers rapid stopping power, ensuring safety even in wet conditions.

Compared to competitors, its responsive drivetrain and potent braking mechanism position it as a frontrunner in its class, providing an unmatched riding experience.

Suspension and Handling

Central to the Trek 7000's appeal is its state-of-the-art suspension system. Equipped with responsive front shocks, it promises a smooth ride even on rugged terrains. These suspensions are adept at absorbing shocks from bumps, providing cyclists with a jolt-free experience.

Its geometry is specifically designed to offer improved handling on diverse terrains - from city roads to mountain trails. Thanks to the bike's lower center of gravity, riders can expect unparalleled stability.

All these features collectively ensure that regardless of the path taken, the Trek 7000 guarantees a ride that's both comfortable and controlled.

How Durable Is The Trek 7000?

The Trek 7000 is a well-built mountain bike designed to withstand rough terrains and provide a comfortable ride for casual riders. The durability of this bike primarily lies in the materials used for its construction.

The frame of the Trek 7000 is made from high-quality aluminum, which provides the bike with a lightweight and sturdy structure. This material contributes to the bike's durability and enables it to handle tough trails without sustaining significant damage.

The components of the Trek 7000, such as the rear derailleur, brakes, and drivetrain, are also carefully selected to ensure a long-lasting performance. Quality tires are crucial for the durability of any mountain bike, and the Trek 7000 is no exception.

The tires used in this model are designed to provide excellent grip, even on challenging surfaces, ultimately enhancing the bike's longevity. The wheel design is super durable for off-roading too.

Is The Trek 7000 Worth Buying?

As mountain bike enthusiasts, we believe the Trek 7000 is worth considering, as it has built a solid reputation over the years. Designed for both casual riders and those new to the sport, this bike is known for offering a comfortable ride while still providing durability and performance.

One of the components contributing to the comfortable ride is the aluminum frame, which is both lighter and stronger than many alternatives. This makes the Trek 7000 easier to handle and more capable of tackling various trail conditions.

Additionally, the wide gear range on this mountain bike allows for easier hill climbs and a more enjoyable overall experience. We like the fact that the Trek 7000 is suitable for casual riders, but it's also designed to handle more adventurous trails.

Before making a decision, research your own and read reviews from fellow cyclists better to understand the Trek 7000's riders' experiences. We think it’s a good buy, and we're confident you'll enjoy hitting the trails with this reliable mountain bike.

Why Road Cyclists Are Switching to Gravel Bikes

Why Fitness Enthusiasts Are Switching to Smart Cycling Trainers

Why Competitive Cyclists Are Switching to Aero Road Bikes

Why Eco-Conscious Riders Are Switching to Bamboo Bikes

About THE AUTHOR

Danny Lawson

Mountain biking is more than just a hobby for me - it's a way of life. I love the challenge and excitement that comes with it, and I'm always pushing myself to go faster and ride harder. Some people might think that mountain biking is dangerous, but I see it as the only way to live.

Trending Now

Why City Dwellers Are Switching to Folding Bikes

Why Budget-Conscious Riders Are Switching to Co-op Bike Brands

Why Mountain Bikers Are Switching to Fat Tire Bikes

Why Urban Commuters Are Switching to Electric Bikes

About PedalChef

PedalChef is a blog on all things cycling. We are a group of people who love bikes, and we want to share the joy that comes with the experience. You can read more about us here .

©2024 PedalChef. All rights reserved.

We can be reached at [email protected]

PedalChef.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs, and is compensated for referring traffic and business to these companies.

Trek X-Caliber Frame

• Write Review

Specifications

Sizes and geometry.

​ www.trekbikes.com ​

More Products

On-One Big Dog Frame

Bird Zero 29 Frame

Nukeproof Cub Scout 20 Frame

Trek Roscoe (2022-2023) Frame

Nukeproof Cub Scout 24 Frame

Nukeproof Cub Scout 26 Frame

Kona Honzo ST Frame

Orange P7 29 Frame

• Mountain Bike Frames
• Trek Mountain Bike Frames

Trek Marlin 6 mountain bike - $200 (Louisville)

google map 

QR Code Link to This Post

post id: 7734856488

posted: 2024-04-06 20:53

♥ best of [ ? ]

refresh the page.

Trek Marlin 6 mountain bike - bicycles - by owner - bike sale -...

18" aluminum frame, 19" wheels. Please stop in on Wednesday or Saturday between 1 p.m. and 3 p.m. to take advantage of this opportunity to score a really nice bike at a great price. We are located...

City OKs new Moscow Mountain trails

Moscow Mountain could have a new 2-mile system of bike trails in two years thanks to a local volunteer group and a Tuesday decision from the Moscow City Council.

The Moscow Area Mountain Bike Association is proposing to build and maintain the trail system on the mountain near the intersection of Moscow Mountain Road and Rock Creek Road.

MAMBA is a local nonprofit organization founded in 1997 that develops, maintains and promotes the use of more than 60 miles of non-motorized trails on and around the Moscow Mountain area.

The group wants to construct the trails on 20 acres of land that was donated to the city in 1941 by Harry and Nina Powell. It is currently undeveloped and not being managed for recreational purposes.

MAMBA anticipates construction will cost $10,000. It has applied for a grant from the Idaho Department of Parks and Recreation to fund the project, and asked the city to provide a matching $5,000. The city approved the match along with a license agreement for the trail system.

MAMBA anticipates construction to start this spring and for the trails to open in May 2025.

The nonprofit says this new trail system will discourage unauthorized user-created trails, improve recreational activity in the area and appease those who want more advanced mountain bike trails.

Councilor Sandra Kelly said she believes this project will help with the city’s tourism, and she appreciates that MAMBA will maintain the trails.

Councilor Gina Taruscio also praised MAMBA’s ability to tackle a project like this.

“The reputation you guys have precedes you and I really think this is a ridiculous no-brainer,” Taruscio said.

In other business, the council approved an appeal that will allow The Jubilee School Montessori in Eastside Marketplace to have a day care for children ages 3 to 5.

City staff previously determined the proposal did not meet the license requirements because the facility did not have a fenced outdoor play area adjacent to the day care.

Malia Mason, director of The Jubilee School Montessori, approached the council to appeal the denial. She said the school wants to incorporate 3- to 6-year-old children into its school program, but the city requires a day care license for 3-year-olds.

The school plans to create an outdoor play area in the future. There is currently an outdoor space behind the building. Mason also said that 3- to 4-year-olds would not use the outdoor area because they are only at the facility for three hours in the morning.

There was much debate about this request, particularly about whether the school’s unique education model justified waiving the day care rule regarding play areas. The motion to approve the license passed 4-2.

Also on Tuesday, the council approved a grant request to the Idaho Parks and Recreation to upgrade Lola Clyde Park by adding parking, frontage improvements and an internal pathway system.

I didn’t think I would ever need WA Cares: I was wrong

I never thought I would need someone to care for me.