minelab safari ikinci el

Minelab Safari Reviews, Price and Specifications

All-purpose land metal detector.

Retail Price: $1,295.00

Available Reviews: 2

Specifications:

• Length: Adjustable from 43" to 54"
• Weight: 3.6 lbs excluding batteries
• Search Coil: 11" lightweight, waterproof, Double D
• Audio Output: Internal speaker or headphones
• Headphone Output: 1/4" stereo jack
• Visual Display: 64 x 128 pixel liquid crystal display (LCD)
• Transmission: Full Brand Spectrum (FBS), simultaneous 28 frequencies ranging from 1.5kHz to 100 kHz
• Ground Rejection: Ground Compensation - advanced digital filtering
• Discrimination: Linear (-10 to +40 discrimination options)
• Custom Select Discrimination: Yes (-10 to +40)
• Detect Modes (Preset): 4 (Coin; Coin/Jewelry ; Relic; All Metal)
• Detect Modes (Personal): 4 (Programmable/Save)
• Auto Noise Cancel (Scanning): Yes
• Pinpoint: Non-motion with audio and visual indicators
• Sensitivity Adjustment: Fully Automatic/Manual (0-20)
• Threshold: Adjustable (0-40)
• Target Volume: Adjustable (0-20)
• Trash Density: High/Low
• Batteries: 12V Alkaline Pack - 8 x 1.5 AA (batteries not included)
• 4 Year Warranty

Safari...Modern technology in a simple package

If you have another metal detector, treasure hunting system or metal detecting equipment of any sort, and would like to leave a review for it, please do so > > > back to Metal Detector Reviews Directory page .

If you would like to read my in-depth articles containing useful information on important subjects related to the hobby of metal detecting and treasure hunting, such as types of metal detecting activities and metal detectors required, how to research for productive hunt sites, which search techniques and methods to use for specific detecting tasks, and much more, please visit my directory pages:

• In-Depth Articles on Metal Detecting

• Expert Guides for Detectorists

• Helpful Tutorials for Detectorists

• Secrets For Beginners

Minelab Safari: Unveiling Treasures with Multi-Frequency Power

Beginner’s Best Friend or Pro’s New Ally? Exploring the Minelab Safari

The Minelab Safari is a metal detector designed for treasure hunters seeking a balance of ease of use and advanced performance . Packed with innovative features like Full Band Spectrum (FBS) technology and automatic ground balancing , it promises an exciting journey into the world of metal detection. Let’s delve into the Safari’s capabilities and see if it lives up to its adventurous name.

Unveiling the Features:

• FBS Technology:  Unlike single-frequency detectors, the Minelab Safari utilizes  28 frequencies simultaneously , ranging from 1.5 kHz to 100 kHz. This adaptability provides  deeper detection for larger objects  at lower frequencies and  superior sensitivity for smaller finds  at higher frequencies.
• Automatic Ground Balancing:  The Minelab Safari automatically adjusts to various ground conditions , eliminating the need for manual settings and ensuring optimal performance across diverse terrains, from parks to beaches.
• Visual Target Identification:  A clear  LCD display  showcases target information, including  target conductivity  and  iron discrimination levels , aiding in identifying desired finds and minimizing unwanted signals.
• Audio Discrimination:  Distinguish between different types of metals through distinct  audio tones , allowing you to focus on specific targets and ignore junk.
• Lightweight and Ergonomic Design:  The Safari boasts a  comfortable and adjustable three-piece shaft  and a  lightweight control box , making extended treasure hunts enjoyable.

Treasure Hunting Advantages:

• Suitable for beginners and experienced users alike:  The Minelab Safari intuitive interface and automatic features make it easy to pick up for newcomers, while its advanced capabilities offer depth and customization for seasoned treasure hunters.
• Versatility across terrains:  Whether you’re searching parks, beaches, or fields, the FBS technology and automatic ground balancing ensure optimal performance in various environments.
• Improved target identification:  Visual and audio cues help you accurately pinpoint desired finds and minimize digging up unwanted items.
• User-friendly design:  The comfortable and lightweight construction allows for extended treasure hunts without fatigue.

Things to Consider:

• Price:  Compared to some beginner-friendly detectors, the Safari falls in a slightly higher price range.
• Complexity:  While user-friendly, it might have a steeper learning curve than some basic detectors.
• Limited manual settings:  If you prefer extensive customization, other detectors might offer more granular control.
• Excellent performance for coin shooting and treasure hunting in various environments, such as parks, beaches, fields, and woods.
• Easy to use preset modes and settings that suit different ground conditions and target types.
• Excellent depth performance that can reach up to around 14 inches, depending on the target and soil.
• Lightweight and robust, allowing a very comfortable day of detecting. It also has an adjustable arm-rest and shaft length for extra comfort.
• It is not waterproof, except for the coil. This means it cannot be submerged in water or used in heavy rain.
• It is more expensive than some other metal detectors in the same category. It costs around $1000, while some of its competitors cost around $500-$700.
• It requires eight AA batteries that can last up to 12 hours. This means it may need frequent battery changes or recharges, especially for long detecting sessions.

Conclusion:

The Minelab Safari strikes a compelling balance between user-friendliness and advanced technology. Its multi-frequency capabilities, automatic features, and clear target identification make it a versatile tool for treasure hunters of all levels . If you’re looking for a detector that simplifies the search while offering depth and performance , the Safari might be your perfect metal detecting companion. Remember to research and compare with other options to ensure it aligns with your experience and budget. Happy hunting!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Patio, Lawn & Garden
• Outdoor Power Tools
• Metal Detectors

Image Unavailable

• To view this video download Flash Player

Minelab Safari Universal Metal Detector

About this item.

• FBS multiple frequency technologyUltra-lightweight 11 inch Double-D waterproof coil combines high performance, great depth and sharp pinpointing
• Four pre-programmed detection modesEach individual mode contains the optimum settings for preferred targets, allowing you maximum time in the field
• Pinpoint with audio and visual indicators for more accurate detection press the pinpoint button and zone-in on the precise location of the target
• Noise Cancel automatically selects the quietest most stable channelRobust well balanced design for comfortable detecting for longer periods
• Intuitive menu interface for fast and easy access and adjustmentTarget Volume Adjust adapts target signal volume to suit user preference

Customers also viewed these products

PRODUCT CERTIFICATION (1)

Climate neutral by ClimatePartner certifies the carbon footprint of a product was calculated and all associated emissions were offset.

Product information

Looking for specific info, product description.

Hidden treasures are now within reach with Safari. Powered by Minelab's Full Band Spectrum FBS multiple frequency technology the Safari combines deep sensitive and accurate detecting for anyone demanding both simplicity and performance Safari uses advanced digital filtering to eliminate the influence of ground signals automatically so you can experience easy seamless detecting whatever the field conditions. With its High Trash Density setting Target Ids and audio tones are updated when sweeping over closely spaced targets fast This improves the recovery of deeply buried high conductivity targets in a trashy environment and allows you to more accurately identify the type of target found Discover the adventure and excitement of detecting with a Safari today.

Top Brand: MINELAB

Compare with similar items, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

Cutaplug Site

• How to Metal Detect
• Metal Detecting Finds
• Metal Detecting Tips
• Metal Detecting Checklist
• Metal Detecting Books
• Metal Detecting Forums
• Metal Detecting Magazines
• Metal Detector Reviews
• Best Metal Detectors
• Garrett Metal Detectors
• Whites Metal Detectors
• Minelab Metal Detectors
• Fisher Metal Detectors
• Bounty Hunter Metal Detectors
• Tesoro Metal Detectors
• XP Metal Detectors
• Teknetics Metal Detectors
• Minelab Safari

The Minelab Safari is designed to deliver cutting edge performance with simple turnkey operation. This multi frequency metal detector offers the same 28 frequency technology also found in the E-TRAC and Explorer SE Pro models ranging from 1 to 70 kHz. Labeled Full Band Spectrum or FBS, the Safari’s multi-frequency circuitry integrates powerful microprocessor technology allowing for better detecting depth, sensitivity and resistance to interference.

The Safari’s detection screen provides a wide discrimination range providing 51 segments on a graphical scale for target reference along with corresponding Target ID numbers in clear view. The user selectable Trash Density settings enables it to quickly adapt to hunting grounds with high levels of ground mineralisation or unwanted junk targets. Advanced digital filtering enables the Safari to automatically adjust to and eliminate ground mineralisation effects. Preset Discrimination patterns can also be easily modified to suit the environment and custom user modes can be easily stored on the machine’s internal memory.

All these advanced features are fitted to an easy-to-use menu interface and an ultra lightweight 11 inch waterproof search coil. The Safari is also available in the Pro Pack bundle which includes a rechargeable batter pack and a pair of headphones with left-right volume controls,

Minelab Safari Specifications

• Brand:  Minelab
• Model:  Safari
• Manufacture Date: 2009
• Intended Use:  Coin, Relic, Jewellery & Beach
• Weight: 3.6 lbs (without batteries)
• Battery Type: 8xAA Alkaline; rechargeable NiMH included with Pro Pack).
• Visual ID Type: Large monochrome 70 x 40mm (2.8 x 1.5 inch) LCD with adjustable contrast
• Number of Target ID Segments: 51 segments
• Number of Audio Tones: Conductive & ferrous audio response.
• Ground Balance: Automatic ground compensation – advanced digital filtering; Linear -10 to 40 Discrimination options & custom select Discrimination
• Discrimination Type: Digital Notch Discrimination with 51 segments
• Number of Search Modes:  4 Presets; Coin, Coin/Jewellery, Relic & All Metal; 4 user programable
• Adjustable Shaft length: 1050 to 1370mm (43 to 54 inches)
• Sensitivity Adjustment: Fully automatic & manual adjustable from 0 to 20
• Coin Depth Meter: Depth gauge shows estimated depth of target
• Pinpoint Feature: Non-motion with audio and visual indicators
• Frequency: Multi frequency; 1.5 to 100kHz
• Type of Circuit: FBS, Multi frequency
• Coil Type: 11″ Double-D lightweight, waterproof.
• Stock Coil Size: 11 inch
• Suggested Retail Price: $1,295.00
• Street Price: $999.00
• Waterproof features: fully submersible, coil only

Recent Blog Posts

• My 1986 Nissan Project Truck
• Metal detecting best day ever – 26 silver coins in one day!
• Popular Metal Detecting Groups
• Funny metal detecting videos
• Popular metal detecting blogs

Minelab Specs:

• Minelab CTX 3030
• Minelab E-TRAC
• Minelab X-TERRA 305
• Minelab X-TERRA 505
• Minelab X-TERRA 705
• Minelab Explorer SE PRO
• Minelab Excalibur II
• Minelab Sovereign GT
• Minelab X-Terra 705 Gold Pack
• Minelab Eureka Gold
• Minelab GPX 4800
• Minelab GPX 5000
• Minelab Reviews

Minelab Reviews:

• Minelab CTX 3030 Review
• Minelab E-Trac Review
• Minelab X-TERRA 305 Review
• Minelab X-Terra 505 Review
• Minelab X-TERRA 705 Review
• Minelab Explorer SE PRO Review
• Minelab Excalibur II Review
• Minelab Safari Review
• Minelab Sovereign GT Review
• Minelab X-TERRA 705 Gold Pack Review
• Minelab Eureka Gold Review
• Minelab GPX 4800 Review
• Minelab GPX 5000 Review

© Copyright 2014 Cutaplug.com · All Rights Reserved.

Minelab Safari – A Professional Metal Detector For A Beginner (Review, Photos+)

by Detectorist · 04/25/2017

Greetings reader! One of my fellow detectorists bought himself a Minelab Safari and shared his experience and review of this interesting and not very common metal detector. I thank him for the review and give him the word:

What kind of metal detector is the Minelab Safari?

Well, finally I got my hands on a professional level device with a rather big price of 700 euros and a so-called model range in 2009. By the way, remember what gadgets were at that time and how they were? At the time, it was a quite competitive and serious piece of engineering. What experience do I have with other detectors before I bought the safari? I used to have the Ace 250 with the Nel Sharpshooter coil and the Fisher F44. These detectors are very easy to understand, and because I am the person lazy and I do not like any complicated settings, I appreciate the simple and clear interfaces.

I bought a rain cover for my detector, because after all the metal detector is not waterproof and it is necessary to protect expensive equipment.

What I liked

Turning on the detector I was very pleasantly surprised that the menu was so simple that after a couple of minutes you already know how to use it. The menu has no “hidden” mode and settings. It is easy to understand, but anyway I would recommend to read the instruction manual before use – then all questions about setting up and using the detector will disappear.

The detector has simplicity, the high quality, but a pretty decent weight, because it uses 8 AA batteries. But one thing that threw me off with the Minelab Safari was the promised FBS technology which allows the metal detector to work simultaneously on a 28-frequencies – from 1.5 to 100 kHz, and this should allow (in theory) equally detect large objects at the maximum depth (due to the low frequencies – 3 kHz), and small things (due to the high frequency spectrum – 20 kHz or more). Since Safari costed less than the E-Trac, my choice fell on it.

Without reading the manual, I went detecting to a sand area nearby. The device immediately began giving all kinds of signals, but I quickly understood that they were trash signals. Suddenly, among all this trash I got a good signal, I dug: a modern coin. After about half an hour I had found two coins, and please note – no foil or other kinds of trash.

Still I hesitated, a detector in such a range can’t be this simple and perhaps there are some hidden features, but after reading the manual, I found nothing. I have the impression that the detector either is too smart, or I did not really understand what it signals to me.

Of course, I wanted to hurry and get some experience in the field. In the fields, I had the same result, my friend with the Deus dug a lot of trash, while I only got a few signals, one of them being a brass ring. In 4 hours I dug three signals, but something to notice – no foil and wire, like a fellow with the Deus.

What I disliked

It seemed to me that detecting was a bit boring, because you have to swing the coil very slowly, and even then, when you hear a signal you have to go back and check it, and if the place is very littered, the detector slowly receives the signals – this could be a slow processor and a large amount of information coming at it, yet at the same time it scans in 26 frequencies, and when the signal reaches the ears, the place where the object was, is now gone.

With the long and slow swipes, and the long time between digs, your hand gets quickly tired and begin to freeze. The detector is very interesting and intelligent. It is quite suitable for those who do not like a lot of digging and only want to dig good targets.

The secret of detecting with the Minelab Safari

To get maximum results in detecting, you better wave it slow over the fields, which will give a minimum of signal passes. It is better to move slowly, but to collect more finds. But again, for the exploration it is always better to have an extra detector, one with which you can quickly run through the field with to find the coin areas (the coins on the field never lie evenly and are concentrated more in certain areas), and then to search there with the Minelab safari (mentally make squares of 5 by 5 meters, for example).

The depth on it is trimmed (it is not the E-Trac, but it also costs less), and therefore it is better to replace the standard coil to another, from a third party. A gain of 20% -30% is guaranteed.

And what is your experience with the Safari? Do you have something to share? All the reviews on the metal detectors and search techniques we have gathered here. You do not know where to start digging? We collect all our “diggers tips”  here!

Tags: Minelab Minelab Safari Reviews

You may also like...

Bounty hunter tracker iv metal detector – review and tips.

20 May, 2016

Garrett Z-Lynk or Minelab PRO-SONIC: Who will be first with launching a universal wireless audio module?

2 Dec, 2016

Teknetics T2 Review and First Impressions (Info, Thoughts, Photos +)

4 Jun, 2017

6 Responses

• Pingbacks 0

I disagree with your post I’ve had my safari for a good few years found good stuff don’t hardly dig trash as you said in your review if you only want to dig good targets well who wants to dig rubbish certainly not me I think you need abit more time with the safari yes you do have to have a slow swing but that’s not that bad

Different people, different opinions 🙂 I prefer quick swing, for example, so looking for a fast response.

Hello, I am a safari owner and I want to change it with something better. I am searching for coins, relics, jewelry in fields, mountains, beaches, old houses and parks. I want faster recovery, deeper depth, and better target identification. What detectors do you suggest until 700euros budget?

Hello, George! Can recommend the XP ORX, I think it will be the perfect choice.

What is your opinion about Teknetics T-2, Fisher F-19, Nokta/Makro Simplex/ and Minelab equinox?

Explorer , safari , etrac ..

Tbey are more or less all the same , Providing real FBS system and resl accuracy.

Etrac is not much deeper fir sure .. The safari is just a little more handicapped sinceyu can tweak it less.

The explorer 2 , altough older has the same depth as the etrac.. sinoly becaue you can tweak it as you want . Etrac is just a little bit faster .

All the explorers are great , superb if you ask me . Low and slow will make you a better detectirist and slows you down forcing you to investigate a little better .

I have run them all and no other detectir ever called a detector is better then one of them wich does not mean a tesoro vaquero or deus is bad , No , they are great tools too , fast , light and all ..

Yet they wiol Never be a explorer

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed .

NEW AND POPULAR IN BLOG

• Recent Posts
• Popular Posts

Nokta Double Score: Is This the Right Detector for You? (Review, Thoughts, Hands-on Experience+)

Nokta AccuPOINT Review: The Pinpointer of the Future? (Review, Unboxing, Testing +)

Protecting Your Metal Detector: Some Tips and Tricks (Diggers Tips +)

XP Deus Coil Not Connecting? This Might Fix It! (Personal Experience and Advice +)

What Shovel Shoud You Use For Metal Detecting? Lesche T-Handle vs. Fiskars All-Steel Shovel (Review, Comparison, Thoughts+)

NEW COMMENTS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

• Detectors and Gear
• How to Use Your Metal Detector

The Minelab Safari "Review and Tips!"

• Thread starter Silver_Sn1per
• Start date Apr 16, 2012

Silver_Sn1per

• Apr 16, 2012

Ok now that I have over 60 hours of use on my ne Minelab Safari... I feel that I can now write up a good review and share my settings! I am going to start out with the cons... First off would have to be the weight of the Safari, your arm does fatigue pretty quick while using this beast. But you do get used to it, and it just reminds you of the quality American made product! Second and the largest con would be the battery life. The Safari does not come with a rechargeable battery pack, but you can purchase one. The Safari takes EIGHT AA batteries, and let me tell you... If you metal detect as much as I do, your going to be going through AA's like water, lol. My last con would have to be that the machine is not waterproof, the coil is but not the head unit! You would think with how much the Safari weighs Minelab would have made it water proof. Ok now the PRO's... Wow is all I can say about FBS! As soon as you turn the Safari on, noise cancell, and start sweeping you can just tell its a quality metal detector! I have found silver coins as deep as 14 inches with the Safari, as well as small silver pins that are half the size of a dime at the same depth! The flute sounds or peeps are much more reliable than a standard beep or bell tone that you might find on a Garrett. I do not use the stock programs on my Safari because I feel that the less descrim you use, the better the performance is. I really like the fact that the coil wire is not wrapped around the outside of the shaft... Gives the machine a cleaner look and it also keeps the stress off your wire. The Safari comes with the same DD Coil that is found on the newer Etrac, which put a smile on my face. There are more Pros but my hand is starting to hurt so i am going to move on, lol. Well with all of that being said, below is a list of the settings I use for coin shooting! -Custom All Metal Mode with discrim up to 0 and also discrim +40. -Sensitivity: between 15-19 "depends on how trashy the area is" -Trash Density: High "for faster recovery" -Threshold: 9 "I wear headphones" -Target sound: 20 max ---TIPS--- -Noise cancel is your friend! -Do not rush, take your time and trust that sexy machine your swinging! -When performing a noise cancel, place the coil ON THE GROUND. The Safari handbook tells you to hold the coil up off the ground, but I found that the machine performs better with the coil on the ground during a noise cancel. -Everytime you change the sensitivity... Perform a noise cancel! -The target ID numbers are very accurate, but you shouldn't have to keep your eyes glued to the screen, learn the sounds. -Bring spare batteries -Read up on DD Coils, and learn the many different methods you can use with a DD Coil. -If you do not own a decent digging tool... Go buy one, lol this machine goes deep!  

Elite Member

• Apr 18, 2012

TonyAZ said: I just got mine a few days ago-haven't tried it yet-goin out thursday .tony az Click to expand...

Full Member

Silver_Sn1per said: Ok now that I have over 60 hours of use on my ne Minelab Safari... I feel that I can now write up a good review and share my settings! I am going to start out with the cons... First off would have to be the weight of the Safari, your arm does fatigue pretty quick while using this beast. But you do get used to it, and it just reminds you of the quality American made product! Second and the largest con would be the battery life. The Safari does not come with a rechargeable battery pack, but you can purchase one. The Safari takes EIGHT AA batteries, and let me tell you... If you metal detect as much as I do, your going to be going through AA's like water, lol. My last con would have to be that the machine is not waterproof, the coil is but not the head unit! You would think with how much the Safari weighs Minelab would have made it water proof. Ok now the PRO's... Wow is all I can say about FBS! As soon as you turn the Safari on, noise cancell, and start sweeping you can just tell its a quality metal detector! I have found silver coins as deep as 14 inches with the Safari, as well as small silver pins that are half the size of a dime at the same depth! The flute sounds or peeps are much more reliable than a standard beep or bell tone that you might find on a Garrett. I do not use the stock programs on my Safari because I feel that the less descrim you use, the better the performance is. I really like the fact that the coil wire is not wrapped around the outside of the shaft... Gives the machine a cleaner look and it also keeps the stress off your wire. The Safari comes with the same DD Coil that is found on the newer Etrac, which put a smile on my face. There are more Pros but my hand is starting to hurt so i am going to move on, lol. Well with all of that being said, below is a list of the settings I use for coin shooting! -Custom All Metal Mode with discrim up to 0 and also discrim +40. -Sensitivity: between 15-19 "depends on how trashy the area is" -Trash Density: High "for faster recovery" -Threshold: 9 "I wear headphones" -Target sound: 20 max ---TIPS--- -Noise cancel is your friend! -Do not rush, take your time and trust that sexy machine your swinging! -When performing a noise cancel, place the coil ON THE GROUND. The Safari handbook tells you to hold the coil up off the ground, but I found that the machine performs better with the coil on the ground during a noise cancel. -Everytime you change the sensitivity... Perform a noise cancel! -The target ID numbers are very accurate, but you shouldn't have to keep your eyes glued to the screen, learn the sounds. -Bring spare batteries -Read up on DD Coils, and learn the many different methods you can use with a DD Coil. -If you do not own a decent digging tool... Go buy one, lol this machine goes deep! Click to expand...

cadman said: I didn't know that Minelab was made in America, I thought it was an Australian outfit that has their stuff made in Malaysia. Joe Click to expand...

They are an Australian company with the parts made in Malaysia by US-owned electronics assembly contractor Plexus Corp. Plexus makes all sorts of high grade electronics products including medical scanning machines large & small, military equipment, microwave telecommunications equipment and of course our beloved Minelabs, as well as many other products. If your Minelab wasn't made in Australia by Minelab itself or in Malaysia by Plexus, it's a counterfit. For more information: http://www.minelab.com/usa/consumer/where-to-buy/buyer-beware  

nittany1 said: If your Minelab wasn't made in Australia by Minelab itself or in Malaysia by Plexus, it's a counterfit. [/url] Click to expand...

I heard they used to make them in Ireland too.  

It was purchased at Cabellas, so I doubt that my machine is "counterfeit." I was referring to Plexus materials... I have a Plexus located a few blocks from my house. Plexus plastics are made in America.  

Bonesquat said: I heard they used to make them in Ireland too. Click to expand...

Senior Member

Thanks for the good ole honest review. The Safari is on my short list of upgrade detectors.  

Dark Chameleon

I considered the Safari, my detector shop was hard selling it with major savings but i have adamaged right arm (titanium wire to put the muscle back) so cant handle that weight for that long, the ATPro's under 3 lbs won in the end but the safari has had good reviews...dont know why they are discounting it right now, a few seem to be doing it, kellys, md, etc  

• Apr 30, 2012

I have found the Safari to be much lighter than my old machine so it was actually a pleasure swinging this. One thing I don't fully understand is the noise cancel - what is it and why, and how often do I need to do it?  

lisfisher said: One thing I don't fully understand is the noise cancel - what is it and why, and how often do I need to do it? Click to expand...

• May 1, 2012

What would be an example of what one would hear if the noise cancel was not done?  

lisfisher said: What would be an example of what one would hear if the noise cancel was not done? Click to expand...

• May 3, 2012

Great explanation, I think I got it now, thanks!  

huskerdetector1

• Apr 28, 2014

Mine lab Safari Problems Hello everyone. I recently purchased a Mine lab Safari, and seem to be having troubles with it. To me, it seems it picks up way too much junk, and can't even discriminate between a silver coin and rusty nail. What could I be doing wrong? The high trash setting seems to not work very well and the pinpointer doesn't do that good of a job either. By comparison, I found a lot more coins with my cheaper $80 model. Shouldn't a high end piece of equipment do a better job of discriminating? Are there more accurate and recommended detectors out there? Thank you for your time and considersrion!  

My Safari hits coins and junk deep, but man, it constantly beeps and chatters all the time if not in a barren field. This is with a noise cancel first, running high trash density, and cutting the sensitivity all the way down to 11. I put an 8" Sunray coil on it for more trashy areas but it still has constant chatter and falsing, usually saying silver, silver. I too often get fooled by deep rusted nails but that I don't mind as much as the constant beeping while swinging without repeatable signals. As for the weight, I just pump a little iron and it definitely helps. Mine seems to have a hard time holding an even threshold too, even hunting in the woods. The threshold is constantly dropping out as I swing. But it does find deep stuff, I just wish it weren't so noisy all the time.  

mr_baker4420

gunsil said: My Safari hits coins and junk deep, but man, it constantly beeps and chatters all the time if not in a barren field. This is with a noise cancel first, running high trash density, and cutting the sensitivity all the way down to 11. I put an 8" Sunray coil on it for more trashy areas but it still has constant chatter and falsing, usually saying silver, silver. I too often get fooled by deep rusted nails but that I don't mind as much as the constant beeping while swinging without repeatable signals. As for the weight, I just pump a little iron and it definitely helps. Mine seems to have a hard time holding an even threshold too, even hunting in the woods. The threshold is constantly dropping out as I swing. But it does find deep stuff, I just wish it weren't so noisy all the time. Click to expand...

Similar threads

• Apr 18, 2024

• Apr 12, 2024

• volksbeetle28
• Apr 10, 2024

• Walking the mile
• Apr 6, 2024